Robert M.

Robert M.

Robert M.

Robert M.

If the elastomer over-mold is to be present on both A and B sides of the parts two material molds that shuttled or rotated between mold sections must be used .Two material molds using moving cores should be used to form a uniform coating on a portion or the complete side of a simple part. Table 2: Adhesion Values (pli) for Typical TPE grades which are polar modified styrenic block copolymers TPE-A TPE-B TPE-C TPE-D TPE-E TPE-F TPE-G Cycoloy C2950 (PC/ABS) 12.4 A 16.7 A 15 A 15.5 C 26.4 C Cycolac T1000 (ABS) 11.9 A 17.8 A 14.5 A 15.1 C 27.2 C Lexan 141 (PC) 12.2 A 14.5 A 13.5 A 17.2 C 27.1 C Zytel 7331F (PA6) 21 A 23.5 A Zytel 73G33L (33% GF PA6) 17.2 A 19.8 A Zytel 101L (PA66) 22.1 A 20.7 A Table3: Adhesion Values (pli) for commercially available TPEs. B-TPE-65A B-TPV-55A B-TPE-35A B-TPE-50A B-TPV-55A B-TPV-70A Cycoloy C2950 (PC/ABS) 12.8 A 8.1 A 10.4 A 15.1 A Cycolac T1000 (ABS) 10.2 A 9.1 A 9.1 A 12.4 A Lexane 141 (PC) 11.7 A 10.2 8.1 A 15 A Zytel 7331F (PA6) 7.2 A 8.8 A Zytel 73G33L (33% GF PA6) 8.1 A 8.2 A Zytel 101L (PA66) 6.8 A 7.2 A 0 5 10 15 20 25 30 35 TPE-A TPE-B TPE-D TPE-E1 TPE-E2 ABS PC/ABS PC Figure 8: Adhesion values of TPEs with rigid substrates, ABS, PC and PC/ABS Consumer Product Differentiation Page 13 July 19, 2007 Today there is phenomenal interest in overmolding TPEs onto rigid substrates, particularly in the consumer product arena in applications requiring a soft touch.

% Specific Color Heat WHITE 10MB03 Titanium Dioxide, Rutile 60 1.74 PW-6 1 I/O SBR 10EP03 Titanium Dioxide, Rutile 60 2.33 PW-6 1 I/O EPDM YELLOW 12MB01 (a) Diarylide AAOT GS 48 1.23 PY-14 3 I SBR 12MB02 (a) Diarylide AAOA GS 50 1.15 PY-17 3 I SBR 12MB03 (a) Diarylide HR RS 50 1.16 PY-83 2 I/O (Mass) SBR 12MB09 (a) Diarylide AAA RS 50 1.21 PY-12 3 I SBR 12MB10 (a) Diarylide AAMX RS 30 1.22 PY-13 3 I SBR 13MB03 Benzimidazolone GS 50 1.15 PY-151 2 I/O (Mass) SBR 81MB01 (c) Iron Oxide 65 1.84 PY-42 2 C I/O SBR 12EP01 (a) Diarylide AAOT GS 47 1.16 PY-14 3 I EPDM 12EP03 (a) Diarylide HR RS 43 1.17 PY-83 2 I/O (Mass) EPDM 12EP09 (a) Diarylide AAA RS 47 1.14 PY-12 3 I EPDM 81EP01 Iron Oxide 65 1.78 PY-42 2 C I/O EPDM ORANGE 15MB01 Pyrazolone YS 23 1.23 PO-13 2 I/O (Mass) SBR 15MB05 Dianisdine RS 40 1.11 PO-16 3 I/O (Mass) SBR 15MB06 Benzimidazolone RS 50 1.18 PO-36 2 I/O SBR 15MB07 Benzimidazolone YS 50 1.19 PO-64 2 I/O SBR 15EP01 Pyrazolone YS 23 1.16 PO-13 2 I/O (Mass) EPDM 15EP05 Dianisdine RS 43 1.07 PO-16 3 I/O (Mass) EPDM RED 20MB01 (b) Red Lake C YS 50 1.27 PR-53:1 3 I SBR 22MB01 (b) Lithol Rubine BS 42 1.19 PR-57:1 3 I SBR 23MB06 Specialty Naphthol BS 50 1.11 PR-170 2 I/O (Mass) C SBR 23MB07 Specialty Naphthol YS 50 1.13 PR-170 2 I/O (Mass) C SBR 25MB12 Red 2B, Ca Salt BS 49 1.25 PR-48:2 2 I/O (Mass) SBR 26MB03 (c) Pyrazolone YS 41 1.09 PR-38 2 C I/O (Mass) SBR 28MB02 Red 2B, Ba Salt YS 50 1.38 PR-48:1 2 I/O (Mass) SBR 82MB01 (c) Iron Oxide, Light BS 60 1.68 PR-101 1 I/O SBR 82MB02 (c) Iron Oxide, Dark VBS 60 1.8 PR-101 1 I/O SBR 82MB04 (c) Iron Oxide, Light VYS 60 1.83 PR-101 1 I/O SBR 82MB05 (c) Iron Oxide, Light YS 60 1.84 PR-101 1 I/O SBR 20EP01 (b) Red Lake C YS 50 1.23 PR-53:1 3 I EPDM Stan-Tone Pigment Approx. % Specific Color Heat RED 23EP06 Specialty Naphthol BS 50 1.06 PR-170 2 I/O (Mass) C EPDM 25EP12 Red 2B, Ca Salt Bs 49 1.2 PR-48:2 2 I/O EPDM 26EP03 Pyrazolone YS 41 1.03 PR-38 2 C I/O EPDM 28EP02 Red 2B, Ba Salt YS 50 1.33 PR-48:1 2 I/O EPDM 82EP02 Iron Oxide, Dark VBS 59 1.7 PR-101 1 I/O EPDM 82EP04 Iron Oxide, Light VYS 60 1.73 PR-101 1 I/O EPDM BLUE 40MB05 (c) Phthalocyanine GS 48 1.19 PB-15:3 1 I/O SBR 40MB08 (c) Phthalocyanine RS 52 1.27 PB-15 1 I/O SBR 40MB10 (c) Phthalocyanine RS-NC 48 1.22 PB-15:1 1 I/O SBR 40MB02 Ultramarine 51 1.35 PB-29 1 I/O SBR 40EP05 Phthalocyanine GS 44 1.14 PB-15:3 1 I/O EPDM 40EP08 Phthalocyanine RS 49 1.23 PB-15 1 I/O EPDM 40EP10 Phthalocyanine RS-NC 48 1.11 PB-15:1 1 I/O EPDM 42EP02 Ultramarine GS 50 1.27 PB-29 1 I/O EPDM GREEN 50MB05 Blend (Yellow/Blue) 48 1.21 N/A 3 I SBR 51MB01 (c) Phthalo Brominated VYS 50 1.4 PG-36 1 I/O SBR 51MB03 (c) Phthalocyanine YS 47 1.34 PG-7 1 I/O SBR 51MB05 (c) Phthalocyanine BS 50 1.46 PG-7 1 I/O SBR 59MB01 Chromium Oxide 69 2.17 PG-17 1 I/O SBR 50EP05 Blend (Yellow/Blue) 48 1.16 N/A 3 I EPDM 51EP01 Phthalo Brominated VYS 44 1.37 PG-36 1 I/O EPDM 51EP03 Phthalocyanine YS 47 1.33 PG-7 1 I/O EPDM 51EP05 Phthalocyanine Bs 45 1.37 PG-7 1 I/O EPDM 59EP01 Chromium Oxide 71 2.12 PG-17 1 I/O EPDM VIOLET/MAGENTA 24MB03 Quinacridone Violet 30 1.06 PV-19 2 I/O SBR 24MB04 Ultramarine Violet 60 1.59 PV-15 1 I/O SBR 24MB06 Benzimidazolone 40 1.08 PV-32 2 I/O SBR 24MB07 Carbazole Violet 40 1.25 PV-23 2 I/O SBR 24EP03 Quinacridone Violet 31 1 PV-19 2 I/O EPDM 24EP07 Carbazole Violet 14 1.34 PV-23 2 I/O EPDM Stan-Tone Pigment Approx. % Specific Color Heat BROWN 83MB01 (c) Iron Oxide, Tan HR 60 1.78 PBr-11 1 I/O SBR 83MB02 (c) Iron Oxide, Light 68 2.1 PBr-6 2 C I/O SBR 83MB03 (c) Iron Oxide, Dark 60 1.83 PBr-6 2 C I/O SBR 83EP02 Iron Oxide, Light 69 1.98 PBr-6 2 C I/O EPDM 83EP03 Iron Oxide, Dark 69 1.98 PBr-6 2 C I/O EPDM BLACK 90MB01 (c) Furnace N-330 31 1.2 PBk-7 1 I/O SBR 90MB05 (c) Iron Oxide 60 1.8 PBk-11 2 C I/O SBR 90EP01 Furnace Black 33 1.05 PBk-7 1 I/O EPDM 90EP05 Iron Oxide 55 1.56 PBk-11 2 C I/O EPDM ALUMINUM 61MB01 Aluminum 70 1.5 PM-1 1 I/O SBR 61EP01 Aluminum 60 1.31 PM-1 1 I/O EPDM RS = Red Shade YS = Yellow Shade VYS = Very Yellow Shade BS = Blue Shade VBS = Very Blue Shade GS = Green Shade NC = Non-Crystallizing HR = Heat-Resistant (a) = Potential Migration at Low Use Levels (b) = Poor Alkali Resistance - Not Recommended for Open Steam Cure (c) = Six Month Shelf Life LIGHTFASTNESS I = Indoor Only I/O = Indoor or Outdoor Mass = Outdoor Masstone Application Only C = Some Caution Advised HEAT STABILITY 1 = Above 400°F 2 = 350°F–400°F 3 = Below 350°F C = Some Caution Advised 1.844.4AVIENT www.avient.com Copyright © 2024, Avient Corporation.

M. s/ ROBERT M. Patterson, Sandra B.

B. B. B.

C M Y K HC_Industry bulletin_PDI_fi nal.indd REMAY 78810 TR: 16.5000" x 11.6875" and 17.000" x 11.000" Digital/IAM BL: 17.2500" x 11.9375" FINAL: 8.2500" x 11.6875" and 8.500" x 11.000" i n Polymer Diagnostics Inc. PDI has extensive experience with the testing of medical devices and materials including: • Catheters • Bio-implants • Surgical diagnostic devices • Medical tubing • Other disposable medical devices Issues often arise as a result of: • Improper design or choice of material • The environment of exposure • Processing conditions World-class people and capabilities under one roof • Failure Analysis/Prevention • Qualifi cation Support • Rheology • Polymer Characterization • Deformulation • Physical Testing • Litigation Support • Characterization of polymers in pharmaceutical delivery systems • Phthalate and BPA testing C M Y K HC_Industry bulletin_PDI_fi nal.indd REMAY 78810 TR: 16.5000" x 11.6875" and 17.000" x 11.000" Digital/IAM BL: 17.2500" x 11.9375" FINAL: 8.2500" x 11.6875" and 8.500" x 11.000" i n Polymer Diagnostics Inc. C M Y K HC_Industry bulletin_PDI_fi nal.indd REMAY 78810 TR: 16.5000" x 11.6875" and 17.000" x 11.000" Digital/IAM BL: 17.2500" x 11.9375" FINAL: 8.2500" x 11.6875" and 8.500" x 11.000" i n

Army Personnel”, a report by Thomas M. Method B: The same handle profile is again cored out for optimal wall thickness. The setup was completed by fixing the impact surface of the hammer and applying a 1g (gravity force = 9.8 m/s/s) excitation in the X-direction, as shown in Figure 21.