https://www.avient.com/sites/default/files/2022-12/Mevopur Healthcare Colorants and Formulations for Needle Hubs Application Bulletin.pdf
KEY CHARACTERISTICS • Manufactured at four ISO 13485 certified sites, providing global consistency and increased security of supply • Documented change control beyond CAS number, reducing risk of change • Non-phthalate and formulated without animal-derived substances • Color can be combined with additives to enhance performance and protection REGULATORY SUPPORT • Raw materials tested to: - ISO 10993-1 and USP biological evaluation - European Pharmacopeia 3.1.3/3.1.5 (polyolefin) - USP (polyethylene) - ICH Q3D elemental impurities • Registered Device Master File • Food contact established with FDA/EU* NOMINAL OUTSIDE DIAMETER OF NEEDLE (MM) COLOR DESCRIPTION RAL PANTONE TRANSPARENT PRODUCT CODE OPAQUE PRODUCT CODE 0.4 Medium Grey 7035 423 C PP7M665125 PP7M665127 0.45 Brown 8017 7588 C PP8M665294 PP8M665296 0.5 Orange 2003 173 C PP2M665298 PP2M665300 0.55 Medium Purple 4005 7676 C PP4M665290 PP4M665292 0.6 Deep Blue 5010 288 C PP5M665894 PP5M665896 0.7 Black 9005 Black C PP9M664950 PP9M664952 0.8 Deep Green 6001 7483 C PP6M665687 PP6M665689 0.9 Yellow 1021 115 C PP1M665211 PP1M665213 1.1 Cream 1015 7401 C PP0M665290 PP0M665292 1.2 Pink 3015 502 C PE3M665725 PP3M665727 Healthcare use limitations apply—see below.
Some of the information arises from laboratory work with small-scale equipment which may not provide a reliable indication of performance or properties obtained or obtainable on larger-scale equipment.
https://www.avient.com/sites/default/files/2023-01/Mevopur Healthcare Colorants and Formulations Special Effects Application Bulletin_0.pdf
KEY CHARACTERISTICS • Manufactured at four ISO 13485 certified manufacturing sites, providing global consistency and increased security of supply • Documented change control beyond CAS number, reducing risk of change • Non-phthalate and formulated without animal-derived substances • Available as pre-colored formulation or concentrate and for use in different polymers REGULATORY SUPPORT • Raw materials tested to: - ISO 10993-1 and USP biological evaluation - European Pharmacopeia 3.1.3/3.1.5 (polyolefin) - USP (polyethylene) - ICH Q3D elemental impurities • Registered Drug Master File (Type III) and/or Device Master File • Food contact established with FDA/EU** APPLICATION BULLETIN * Design note: Effect colors require careful consideration of part design and polymer flow paths to minimize visible flow lines.
Some of the information arises from laboratory work with small-scale equipment which may not provide a reliable indication of performance or properties obtained or obtainable on larger-scale equipment.
https://www.avient.com/sites/default/files/2025-03/ColorMatrix Smartheat RHC Technical Bulletin.pdf
Suitable for PET and rPET preforms and bottles, it can be added to preforms providing the following benefits: • Improved blowing performance • Potential for increased rPET content • Increased mechanical strength • Potential for lightweighting • Improved performance through the recycle process • Reduced energy consumption • No pre-drying requirements SmartHeat RHC can contribute towards improved productivity, reduced manufacturing costs, improved sustainability, and can broaden the scope for bottle design.
Some of the information arises from laboratory work with small-scale equipment which may not provide a reliable indication of performance or properties obtained or obtainable on larger-scale equipment.
https://www.avient.com/sites/default/files/2024-07/Composite Heat Release Technology Product Bulletin.pdf
KEY CHARACTERISTICS • Incorporates ceramic and carbon fiber reinforced composite onto a manufacturer- provided, Sporting Arms and Ammunition Manufacturers’ Institute (SAAMI) compliant steel barrel blank • Reduces overall barrel weight • Increases barrel stiffness • Improves heat transfer and reduces barrel bore temperature over multiple rounds PRODUCT BULLETIN THERMAL CONDUCTIVITY VS.
Some of the information arises from laboratory work with small-scale equipment which may not provide a reliable indication of performance or properties obtained or obtainable on larger-scale equipment.
https://www.avient.com/sites/default/files/2022-06/Maxxam FR Injection Molding Processing Guide.pdf
Follow up by purging machine with general purpose PP • Residence time should not exceed 5 minutes for Maxxam FR products • General ventilation is suggested Shut Down • Purge the equipment with a general purpose PP • All tooling and equipment must be free of any residual Maxxam FR upon shut down • Continue generating parts made from the natural PP until clear • Wipe down tool steel with mold cleaner • When using a hot runner system, care must be taken to remove residual product from the manifold MOLD DESIGN RECOMMENDATIONS Cold Slug Wells • Place cold slug wells at the base of the sprue to capture the cold material first emerging from the nozzle • Place cold slug wells at every 90° bend in the runner system • Well depths approximately 2–3 times the diameter of the runner provide best results Draft Angle • Draft angle should be 1/2°–1° per side.
Runners • Full-round or modified trapezoid runners are the best design and provide the least surface to cross section ratio.
Some of the information arises from laboratory work with small-scale equipment which may not provide a reliable indication of performance or properties obtained or obtainable on larger-scale equipment.
https://www.avient.com/sites/default/files/2020-09/stat-tech-tri-fold-processing-guide.pdf
Stat-Tech™ STATIC DISSIPATIVE & ELECTRICALLY CONDUCTIVE FORMULATIONS PROCESSING GUIDE Stat-Tech™ Stat-Tech™ Static Dissipative and Electrically Conductive Formulations are specifically engineered to provide antistatic, ESD and EMI/RFI shielding performance for critical electronic equipment applications.
Cold Slug Wells • Place these wells at the base of the sprue to capture the cold material first emerging from the nozzle. • Place wells at every 90° bend in the runner system. • Well depths approximately 1.5 times the diameter of the runner provide the best results.
Some of the information arises from laboratory work with small-scale equipment which may not provide a reliable indication of performance or properties obtained or obtainable on larger-scale equipment.
https://www.avient.com/sites/default/files/2020-12/therma-tech-processing-guide.pdf
These materials provide the benefits of proprietary conductive additive technologies and the performance of select engineering thermoplastic resins.
Well depths approximately 1.5 times the diameter of the runner provide the best results.
Some of the information arises from laboratory work with small-scale equipment which may not provide a reliable indication of performance or properties obtained or obtainable on larger-scale equipment.
https://www.avient.com/sites/default/files/2022-05/ColorMatrix Amosorb Solo Technical Bulletin.pdf
Providing solutions that are considered recyclable within the colored bottle stream will thus be an integral part of the recyclability strategy for both convertors and brand owners.
Zero Waste Europe Avient is committed to playing its part in this recyclability journey and helping achieve such ambitious targets by providing solutions that will allow the market to fully achieve these goals.
Some of the information arises from laboratory work with small-scale equipment which may not provide a reliable indication of performance or properties obtained or obtainable on larger-scale equipment.
https://www.avient.com/sites/default/files/2025-07/Ballistic Resistant Composite Panels Product Selection _ Install Guide.pdf
Ballistic Resistant Composite Panels PRODUCT SELECTION & INSTALLATION GUIDE KEY CHARACTERISTICS Military grade protection Ballistic resistant composite panels from Avient are constructed to provide military-grade protection from armed attackers for any facility.
Additionally, these UL 752 level 3 panels provide Class 3.7 (Contraband) and Class 5.0 (Body) Forced Entry Physical Attack Ratings per ASTM F1233-21.
Some of the information arises from laboratory work with small-scale equipment which may not provide a reliable indication of performance or properties obtained or obtainable on larger-scale equipment.
https://www.avient.com/products/polymer-additives/biopolymer-colorants-and-additives
If you’re considering bio-based plastics for the products in your portfolio but are concerned about maintaining high-quality product standards, our bio-based additives and colorants may provide the solution you seek.