In some cases, residual gases may slowly evolve from resins or from finished products, so storage spaces may need to be ventilated. When melt processing fluoropolymers, accelerated thermal decomposition should be avoided by having accurate temperature control, and in some cases, using corrosion-resistant materials for processing equipment3. The high-speed manufacture of thin-wall wire jacketing would require a distinctly different formulation compared to the extrusion of a large cross-section stock shape such as a rod.

In some cases, residual gases may slowly evolve from resins or from finished products, so storage spaces may need to be ventilated. When melt processing fluoropolymers, accelerated thermal decomposition should be avoided by having accurate temperature control, and in some cases, using corrosion-resistant materials for processing equipment3. The high-speed manufacture of thin-wall wire jacketing would require a distinctly different formulation compared to the extrusion of a large cross-section stock shape such as a rod.

Entry door 1-page case study EXTERIOR DOORS R E S I D E N T I A L & C O M M E R C I A L Reinforcement of steel to reduce weight and provide: • Corrosion resistance • Improved dent resistance to withstand windborne debris • Structural performance to meet regional wind load requirements • Improved resistance to corrosion and moisture degradation • Increased dent resistance up to 60% vs. unreinforced metal • Enabled reduction in thickness of sheet metal while maintaining structural performance Polystrand™ PETG continuous fiber reinforced composite laminate thermally bonded to steel door skin KEY REQUIREMENTS WHY AVIENT?

A wide range of stock colors is readily available while an expansive selection of additives serves to enhance product performance. ONCOLOR™ COLOR CONCENTRATES • Complete range of in-stock color solutions designed specifically for telecommunications, energy, and automotive applications - Complete Munsell color range for telecommunications applications - Complete NEMA color range for electrical applications - J1128 SAE specifications for automotive applications - UL 2885 file E482856 for halogen-free formulations • Custom color solutions for your most demanding low smoke, non-halogenated, UV, temperature, aging, and shrinkage requirements • Weatherable pigments providing color fade resistance for demanding outdoor applications • Optimized formulations for cross-linked polyethylene wire and cable constructions CESA™ PERFORMANCE ADDITIVE CONCENTRATES Custom designed additive solutions for your specific applications, providing added value through ease of processing, product performance, and operational cost savings. • Laser marking - improve marking reliability and durability in all types of cable jacketing and insulating materials • Antimicrobial - help protect cables from harmful mold and bacteria growth • Nucleating agents - maintain critical dimensions and manage shrink characteristics • Chemical foaming agents - take out weight and reduce resin costs • UV stabilizers - protect resin material and extend product life • Antioxidants - maintain physical properties • Processing aids - minimize die drool associated with some materials COLORANT CHROMATICS™ HIGH- TEMPERATURE POLYMER SOLUTIONS • Fluoropolymer and high-temperature thermoplastics-based colorant and additive concentrates and compounds • Dispersed pigments for coloring PTFE • Functional additives including laser marking, foaming agents, and conductive, antistatic, radiopaque, reinforced, and cross-linked grades • Full range of printing, striping, and marking inks PRODUCT CODE LET DOWN RATIO COLOR (Munsell) CC10225921 1.00% Black CC00012573 1.00% White CC10222359 1.00% Red CC10223395 1.00% Gray CC10222361 1.00% Green CC00012376 1.00% Blue CC10222363 1.00% Orange CC10222360 1.00% Yellow CC10223394 1.00% Brown CC00012516 1.00% Purple CC10062368 1.00% Aqua CC10223396 1.00% Pink PV C PRODUCT CODE LET DOWN RATIO COLOR (Munsell) CC00000001 1.00% Black CC00012837 1.00% White CC10225296 1.00% Red CC10225298 1.00% Gray CC10225300 1.00% Green CC10225295 1.00% Blue CC10225297 1.00% Orange CC10225299 1.00% Yellow CC10225301 1.00% Brown CC10225603 1.00% Purple CC10225293 1.00% Aqua CC10225294 1.00% Pink PE ONCOLOR™ SOLUTIONS FOR TELECOMMUNICATIONS • PVC colorants designed for telecommunications and fiber optic applications • PE colorants that are excellent for foam skin and solid insulation applications • EVA colorants designed for cross-linked materials and resin applications including XLPE, XLPO, PVC, PE, and more PRODUCT CODE LET DOWN RATIO (HB Rated) LET DOWN RATIO (FV-1 Rated) LET DOWN RATIO (VW-1 Rated) COLOR (Munsell) CC10199188OC 1.00% 2.00% 2.00% Black CC1041114625 1.00% 2.00% 2.00% Blue CC1041495625 1.00% 2.00% 2.00% Brown CC1041347125 1.00% 2.00% 2.00% Gray CC1041114825 1.00% 1.00% 1.00% Green CC1041507925 1.00% 2.00% 2.00% Orange CC10371409WE 1.00% 2.00% 2.00% Pink CC1041347225 1.00% 2.00% 2.00% Purple CC1040965625 1.00% 2.00% 3.00% Red CC10269093WE 1.00% 1.00% 2.00% White CC1041270325 1.00% 2.00% 2.00% Yellow PRODUCT CODE LET DOWN RATIO COLOR (Munsell) CC00012853 1.00% Black CC00012946 1.00% White CC10221766 1.00% Red CC10221760 1.00% Gray CC10221765 1.00% Dk Green CC10221764 1.00% Lt Green CC10221757 1.00% Dk Blue CC10221761 1.00% Lt Blue CC10221767 1.00% Orange CC10221763 1.00% Yellow CC10221758 1.00% Brown CC10221762 1.00% Purple CC10224626 1.00% Tan CC10221759 1.00% Pink EV A XL PE PRODUCT CODE LET DOWN RATIO COLOR (Munsell) CC10190635 3.00% Black CC10190642 3.00% White CC10190641 3.00% Red CC10190637 3.00% Gray CC10190638 3.00% Green CC10185195 3.00% Blue CC10185197 3.00% Orange CC10190643 3.00% Yellow CC10190636 3.00% Brown CC10190640 3.00% Purple CC10190634 3.00% Aqua CC10190639 3.00% Pink PB T PRODUCT CODE LET DOWN RATIO COLOR (Munsell) CC10246438WE 2.00% Aqua CC10245005WE 2.00% Black CC10246090WE 2.00% Blue CC10264438DR 2.00% Brown CC10245008WE 2.00% Gray CC10246092WE 2.00% Green CC10264439DR 3.00% Orange CC10261866DR 2.00% Pink CC10261867DR 2.00% Purple CC10264436DR 2.00% Red CC10245006WE 2.00% White CC10246093WE 2.00% Yellow U L 28 85 ONCOLOR™ SOLUTIONS FOR ENERGY CABLE APPLICATIONS • Recommended use rate may vary depending on specific application, process, equipment, and resin grade PRODUCT CODE LET DOWN RATIO COLOR (NEMA) CC00012342 1.00% Black CC00012575 1.00% White CC00012547 1.00% Red CC10018221 1.00% Gray CC00012444 1.00% Dk Green CC10018222 1.00% Lt Green CC00012408 1.00% Dk Blue CC00012407 1.00% Lt Blue CC10013140 1.00% Orange CC00036502 1.00% Yellow CC00012363 1.00% Dk Brown CC00012373 1.00% Lt Brown CC00012526 1.00% Purple CC10018225 1.00% Tan PV C PRODUCT CODE LET DOWN RATIO COLOR (NEMA) AB13820380 3.00% Yellow AB24820333 3.00% Orange AB32820571 3.00% Pink AB33820570 3.00% Red AB44820167 3.00% Purple AB54820507 3.00% Dark Blue AB63820502 3.00% Dark Green AB72820811 3.00% Gray AB84820533 3.00% Brown AB94820333 3.00% Black CC00016954 1.00% White N YL O N ONCOLOR™ SOLUTIONS FOR AUTOMOTIVE APPLICATIONS • EVA colorants designed for use with cross-linked materials like XLPE • Recommended use rate is 1.00% and may vary depending on specific application, process, equipment, and resin grade PRODUCT CODE LET DOWN RATIO COLOR CC00012853 1.00% Black CC00012946 1.00% White CC10221766 1.00% Red CC10221760 1.00% Gray CC10221765 1.00% Dk Green CC10221764 1.00% Lt Green CC10221757 1.00% Dk Blue CC10221761 1.00% Lt Blue CC10221767 1.00% Orange CC10221763 1.00% Yellow CC10221758 1.00% Brown CC10221762 1.00% Purple CC10224626 1.00% Tan CC10221759 1.00% Pink EV A, J 11 28 PRODUCT CODE LET DOWN RATIO COLOR CC00012342 1.00% Black CC00012575 1.00% White CC00012535 1.00% Red CC00012461 1.00% Gray CC00012425 1.00% Dk Green CC00012426 1.00% Lt Green CC00012379 1.00% Dk Blue CC00012378 1.00% Lt Blue CC00012490 1.00% Orange CC00012585 1.00% Yellow CC00012363 1.00% Brown CC00012525 1.00% Purple CC00012561 1.00% Tan CC00012507 1.00% Pink PV C, J 11 28 A RANGE OF WORLD-CLASS SERVICES With manufacturing facilities and innovation centers across the globe, we work with you to understand your goals and provide the expertise you need for your wire and cable applications.

GUIDELINES FOR USING CESA CLEAN ADDITIVES • Cesa Clean works best when molded maintaining normal (injection) pressure/shear • For best results, Avient recommends a “Running Color Change” which eliminates breaks in the molding cycle • Since the Cesa Clean concentrate will expand, it is recommended to reduce the shot size by 20% • It is designed for use at a let-down ratio (LDR) of 3.0% or (33:1); however, use rate can vary depending on the severity of the contamination but typically is 2.0–4.0% (a use rate higher than 6.0% may not have any positive affect on the cleaning performance) • Using Cesa Clean as a routine part of your color change rotation will allow faster changes and consume a minimal amount of raw material - Note: If the manifold is not cleaned routinely, this process may be more time consuming and additional material will be required • It is best to process at your normal polymer processing temperatures - For best performance, stock temperature should be at least 400°F - If 400°F is achieved during the purging process, no additional activation will occur during the reprocessing of regrind - All parts produced during the “Running Purge Cycle” should be captured as regrind, resulting in a scrap-free color change - If using sequential gates, open and close all gates at the same time while purging the tool - If contamination appears to be coming from one gate, open and close first, and for an extended period of time, to force more material through this location - When cleaning in this manner, pay close attention to shot size - Parts containing the previous or new color plus any Cesa Clean can be used as regrind INTRODUCING CESA CLEAN TO YOUR PROCESS Hand Blend • Hand weigh enough of the Cesa Clean and natural resin mix to equate to 3–5 times the barrel capacity • Use rate should be 3.0% or 33:1 for routine cleaning • For difficult-to-clean tooling, or tooling which is not routinely cleaned, start at 4.0% or 25:1 • Note: Do not attempt to vacuum load more than 15 feet from source as stratification/separation may occur Volumetric Feeder • Calibrate feeder to dispense 3.0% or 33:1 for routine cleaning • For difficult-to-clean tooling, or tooling which is not routinely cleaned, start at 4.0% or 25:1 • This style of feeder is highly recommended for at-the-throat metering of Cesa Clean Blending Units Most blenders have an extra bin for an additive • Fill the additive bin with Cesa Clean • Set blender to introduce the Cesa Clean at 2.0 to 4.0% • Note: Do not air convey any further than 15 feet as Cesa Clean has a high density and may separate from the mix. GETTING STARTED TIMING IS THE KEY TO A RUNNING COLOR CHANGE Hand Blend • Have the purge blend ready to load • If hopper contains a mixture of resin, color and/ or regrind, it should be run dry or drained before beginning the color change, keeping the screw full so press cycle continues • Run the main resin hopper dry or shut off hopper to hand feed at the throat • Once press is clean, slide hopper in place and proceed with next color-resin blend • The next color can be added while Cesa Clean is still in the barrel • When splay is no longer visible in parts, reset shot size, parts should be ready to pack (Single) Volumetric/Gravimetric Metering Unit at the Throat • Empty and clean feeder while press continues to run • Add Cesa Clean to the feeder color hopper and calibrate to a 3.0% use rate • When press is clean, start next color • When splay is no longer visible in parts, reset shot size, parts should be ready to pack • Note: If an open/unused secondary feeder is installed, use it for the Cesa Clean concentrate Central Blending Unit • Thoroughly clean unit while continuing to mold parts, keeping a resin feed to the press • Using a clean open hopper or regrind hopper, add the Cesa Clean concentrate • Set blender for additive/color to 3.0% • Once press is clean, drain hopper and/or central blending unit while continuing to mold parts • Begin new color and continue to mold parts • When splay is no longer visible in parts, reset shot size, parts should be ready to pack Process Adjustments That Can Help • Increase back pressure • Increase screw speed • Increase injection speed (in some tools maximum injection speed can facilitate cleaning) • Reduce mold close time (faster cycle) • Always remember a stock temperature of 400°F is essential When press and tool are clean, return all settings to standard production process profile.

• Form 1099-INT (interest earned or paid) • Form 1099-DIV (dividends, including those from stocks or mutual funds) • Form 1099-MISC (various types of income, prizes, awards, or gross proceeds) • Form 1099-B (stock or mutual fund sales and certain other transactions by brokers) • Form 1099-S (proceeds from real estate transactions) • Form 1099-K (merchant card and third party network transactions) • Form 1098 (home mortgage interest), 1098-E (student loan interest), 1098-T (tuition) • Form 1099-C (canceled debt) • Form 1099-A (acquisition or abandonment of secured property) Use Form W-9 only if you are a U.S. person (including a resident alien), to provide your correct TIN.

The program features lower minimum order quantities and flat pricing, allowing inventory levels to be reduced and lowering the probability of expired colorant remaining in stock.

The program features lower minimum order quantities and flat pricing, allowing inventory levels to be reduced and lowering the probability of expired colorant remaining in stock.

For enhanced security, grounding wires can also be placed inside the hollow pole to avoid copper theft.

OnCap Denesting Case Study-CN3.19-1 食品包装添加剂 解决发黏问题 Challe nge Accepted.