ISO 9001:2015 The Quality Management System is applicable to: Certificate No: 65799 Certification Date: 01 October 2020 Effective Date: 25 September 2023 Expiration Date: 30 September 2026 Revision Date: 26 September 2023 Dominic Townsend, President DESIGN AND MANUFACTURE OF COLOUR AND ADDITIVE CONCENTRATES, THERMOPLASTIC RESINS AND SPECIALTY COMPOUNDS This certificate may be found on the ABS QE Website (www.abs-qe.com). WITH ADDITIONAL FACILITIES LISTED ON ATTACHED ANNEX) Certificate Of Conformance has been assessed by ABS Quality Evaluations, Inc. and found to be in conformance with the requirements set forth by: Page 2 of 10 ABS Quality Evaluations Avient Corporation ISO 9001:2015 Certificate Of Conformance ANNEX At Below Facilities: Validity of this certificate may be confirmed at www.abs-qe.com/cert_validation. Activity: Administration, Site management, Manufacture, Laboratory, Procurement, Maintenance, Infrastructure, Warehouse and Transport Activity: Administration, Site management, Manufacture, Laboratory, Procurement, Maintenance, Infrastructure, Warehouse and Transport Page 10 of 10 ABS Quality Evaluations Avient Corporation ISO 9001:2015 Certificate Of Conformance ANNEX At Below Facilities: Validity of this certificate may be confirmed at www.abs-qe.com/cert_validation.

CERTIFICATE Signed for the certification body: Eric Louys Chairman Certification Committee CERTIFICATE EN ISO 50001 : 2018 Energy Management System VINÇOTTE nv Jan Olieslagerslaan 35, 1800 Vilvoorde, Belgium This is to certify that Avient Located at Rue Melville Wilson 2 5330 Assesse Belgium has established and maintains an energy management system according the requirements of EN ISO 50001 : 2018 “Energy Management System” for: Design and manufacture of colour and additive concentrates, thermoplastic resins and speciality compounds This certificate is based on the result of an energy audit documented in the audit report 61231731. Certificate number: 24 EN 47 Valid from 1 February 2024 to 31 January 2027 Further clarifications regarding the scope of this certificate and the applicability of EN ISO 50001 : 2018 requirements may be obtained by consulting the organization. This certificate is granted during the Certification Commission of 1 February 2024 and is subject to the General Regulations of VINÇOTTE nv.

WITH ADDITIONAL FACILITIES LISTED ON ATTACHED ANNEX) Certificate Of Conformance has been assessed by ABS Quality Evaluations, Inc. and found to be in conformance with the requirements set forth by: Page 2 of 7 ABS Quality Evaluations Avient Corporation ISO 9001:2015 Certificate Of Conformance ANNEX At Below Facilities: Validity of this certificate may be confirmed at www.abs-qe.com/cert_validation. Activity: Manufacture of Colorants for Plastics Activity: Manufacture of thermoplastic compounds Page 4 of 7 ABS Quality Evaluations Avient Corporation ISO 9001:2015 Certificate Of Conformance ANNEX At Below Facilities: Validity of this certificate may be confirmed at www.abs-qe.com/cert_validation. Activity: Manufacturing, Shipping and Receiving Activity: Compound and supply of thermoplastics for the medical device industry Page 5 of 7 ABS Quality Evaluations Avient Corporation ISO 9001:2015 Certificate Of Conformance ANNEX At Below Facilities: Validity of this certificate may be confirmed at www.abs-qe.com/cert_validation.

Validity of this certificate may be confirmed at www.abs-qe.com/cert_validation. ISO 13485:2016 The Quality Management System is applicable to: Certificate No: 45324 Certification Date: 24 February 2014 Effective Date: 13 January 2023 Expiration Date: 23 January 2026 Revision Date: 13 January 2023 Dominic Townsend, President DESIGN, MANUFACTURE AND DISTRIBUTION OF THERMOPLASTIC ELASTOMER RESINS & PELLETS FOR THE MEDICAL DEVICE INDUSTRY This certificate may be found on the ABS QE Website (www.abs-qe.com). WITH ADDITIONAL FACILITIES LISTED ON ATTACHED ANNEX) Certificate Of Conformance has been assessed by ABS Quality Evaluations, Inc. and found to be in conformance with the requirements set forth by: Page 2 of 2 ABS Quality Evaluations Avient Corporation ISO 13485:2016 Certificate Of Conformance ANNEX At Below Facilities: Validity of this certificate may be confirmed at www.abs-qe.com/cert_validation.

Certificate NEU Specialty Engineered Materials Certificate Of Conformance This is to certify that the Quality Management System of: NEU Specialty Engineered Materials 15 Corporate Drive North Haven CT 06473 United States has been assessed by ABS Quality Evaluations, Inc. and found to be in conformance with the requirements set forth by: ISO 13485:2016 The Quality Management System is applicable to: Compounding, Prototype Services and Supply of Thermoplastics for the Medical Device Industry. Rev1 This certificate’s validity is subject to the organization maintaining their system in accordance with ABS Quality Evaluations, Inc. 1701 City Plaza Dr Spring, TX 77389 USA requirements for management system certification. For certificates issued in the People’s Republic of China information may also be verified on the Certification and Accreditation Administration of the People’s Republic of China’s website (www.cnca.gov.cn).

Certificate Magna Colours Limited Certificate Of Conformance This is to certify that the Quality Management System of: Magna Colours Limited Unit 3 Dodworth Business Park, Dodworth Barnsley South Yorkshire S75 3SP United Kingdom has been assessed by ABS Quality Evaluations, Inc. and found to be in conformance with the requirements set forth by: ISO 9001:2015 The Quality Management System is applicable to: The Provision of a Service Of Sourcing, Procuring, Design, Manufacturing and Distribution of Specialty Colouration Products and Chemical Auxiliaries for use the Textile, Dying, Printing and Finishing Industries. Rev1 This certificate’s validity is subject to the organization maintaining their system in accordance with ABS Quality Evaluations, Inc. 1701 City Plaza Dr Spring, TX 77389 USA requirements for management system certification. For certificates issued in the People’s Republic of China information may also be verified on the Certification and Accreditation Administration of the People’s Republic of China’s website (www.cnca.gov.cn).

Certificate Avient Corporation A B S Q u al ity E va lu at io n s C er tif ic at io n E Certificate Of Conformance This is to certify that the Quality Management System of: Avient Corporation 33587 Walker Road, Building 428 Avon Lake OH 44012 United States has been assessed by ABS Quality Evaluations, Inc. and found to be in conformance with the requirements set forth by: ISO 9001:2015 The Quality Management System is applicable to: Manufacture of plastic compounds, color and performance additives, engineered thermoplastics, vinyl resins, custom mixed plastic materials, custom and commodity colorants for plastics, polyurethane systems, and plasticizers with design and sampling support at Suwanee, GA, and purchasing, customer service, logistics, quality, design and sampling support at PolyOne Corporate Headquarters at Avon Lake, OH, and distribution of resins Certificate No: 31307 Certification Date: 12 OCT 1995 Effective Date: 11 JUL 2024 Expiration Date 07 OCT 2025 Revision Date: 17 JUL 2024 Dominic Townsend, President Copyright as of the Effective Date, ABS Quality Evaluations, Inc. For certificates issued in the People’s Republic of China information may also be verified on the Certification and Accreditation Administration of the People’s Republic of China’s website (www.cnca.gov.cn). For certificates issued in the People’s Republic of China information may also be verified on the Certification and Accreditation Administration of the People’s Republic of China’s website (www.cnca.gov.cn).

To check this certificate validity, please call + 33(0) 1 41 97 00 60. AVIENT BELGIUM 2, RUE MELVILLE WILSON 5330 ASSESSE- BELGIUM Bureau Veritas Certification France certify that the Management System of the above organization has been audited and found to be in accordance with the requirements of the management system standard detailed below: Standard ISO 14001 : 2015 Scope of certification DESIGN AND MANUFACTURE OF COLOUR AND ADDITIVE CONCENTRATES, THERMOPLASTIC RESINS AND SPECIALITY COMPOUNDS. Certification cycle start date: 22 February 2023 Subject to the continued satisfactory operation of the organization’s Management System, this certificate expires on: 10 January 2026 Expiry date of previous cycle: : 10 January 2023 Certification audit date: 21 November 2022 Original certification date: 11 January 2017

MSC Certificate Place and date: For the issuing office: Shanghai, 20 March 2024 DNV - Business Assurance Building 9, No. 1591 Hongqiao Road, Changning DistrictShanghai China 200336 Zhu Hai Ming Management Representative Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid. ACCREDITED UNIT: DNV Business Assurance B.V., Zwolseweg 1, 2994 LB, Barendrecht, Netherlands - TEL: +31(0)102922689. www.dnv.com/assurance MANAGEMENT SYSTEM CERTIFICATE Certificate no.: 7071-1998-AQ-RGC-RvA Initial certification date: 28 April 1998 Valid: 30 March 2024 – 29 March 2027 This is to certify that the management system of PolyOne-Shanghai, China No. 88, Guo Shou Jing Road, Z. Park, China (Shanghai) Pilot Free Trade Zone, Shanghai, China 201203 and the sites as mentioned in the appendix accompanying this certificate has been found to conform to the Quality Management System standard: GB/T 19001-2016 / ISO 9001:2015 This certificate is valid for the following scope: Design and Manufacture of Colour and Additive Concentrates http://www.dnv.com/assurance Certificate no.: 7071-1998-AQ-RGC-RvA Place and date: Shanghai, 20 March 2024 Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid.

SCCertificateRebrandA4Portrait CERTIFICATE OF REGISTRATION This is to certify that the management system of: Fiber-Line, LLC Main Site: 280 Performance Drive SE Hickory North Carolina 28602 United States has been registered by Intertek as conforming to the requirements of: ISO 9001:2015 The management system is applicable to: Manufacture of textile components to cable manufacturers. Certificate Number: CERT-0116814 Initial Certification Date: 24 November 2010 Date of Certification Decision: 25 March 2024 Issuing Date: 25 March 2024 Valid Until: 31 March 2027 Calin Moldovean President, Business Assurance Intertek Testing Services NA, Inc. dba Intertek, 4700 Broadmoor SE Suite 200 Kentwood, Michigan 49512, United States In the issuance of this certificate, Intertek assumes no liability to any party other than to the Client, and then only in accordance with the agreed upon Certification Agreement. This certificate’s validity is subject to the organization maintaining their system in accordance with Intertek’s requirements for systems certification.