Imaging Technology How can you make the most of color, from design through processing?

Customizable colorants and additives from Avient can help enhance traditional materials for better performance and risk mitigation, while specialty elastomers and thermoplastics offer alternatives to traditional materials, such as silicone or PC/ABS, to meet application-specific or regulatory trends. Imaging Technology

Standard acetaldehyde scavenging products can often contribute towards yellowing during recycling. INCREASED rPET CONTENT & IMPROVED QUALITY Reduced Preform Acetaldehyde Levels Acetaldehyde generation in the pre- form can lead to issues with taste and odor for bottle contents. This issue can increase when higher levels of rPET are used.

These functional additives are available as concentrates to dilute into the polymer, or ready-to-use formulations that can be used as such without dilution. Reduction in yellowing using Color Compensation Technology (CCT)   Reduced material consumption/cycle time/improved properties—nucleation Fast acting new generation nucleant for PE and PP; improved dimensional stability, thermal and mechanical properties    Laser marking replacing ink printing/labels Solvent-free, high-speed identification for Nd/YAG laser    Antiblock for PE/PP film Non-migrating additive system maintaining high gloss and printability  Antioxidants for PE, PP, TPE Thermal protection during converting/ downstream sterilization     Brand protection/ anticounterfeit Range of covert and non-covert systems    Volatiles/odor absorber for PE/PP Physical absorption of a wide range of molecules responsible for odor, VOC and potential extractables/ leachables in plastics   Healthcare use limitations apply—see below. Processing conditions can cause material properties to shift from the values stated in the information.

We offer a customized dosing and handling system that can be integrated with existing processing equipment. Processing conditions can cause material properties to shift from the values stated in the information. Without limiting the generality of this statement, Avient products shall not be used in any medical device application intended for: (1) exposure to human tissue or body fluids for 30 days or greater; (2) “plastic” (cosmetic or reconstructive) surgery use; (3) reproductive implants or any birth control device; or (4) any critical component in a permanently (greater than 30 days) implanted medical device that supports or sustains human life.

SELECTION GUIDE reSound™ REC Recycled Content Thermoplastic Elastomers Post-industrial and post-consumer recycled TPEs To help brands reach their sustainability goals, reSound™ REC post-industrial recycled (PIR) and post- consumer recycled (PCR) TPE formulations utilize 9–83% recycled content. reSound REC TPEs can be overmolded onto polypropylene (PP), polycarbonate (PC), acrylonitrile butadiene styrene (ABS) and PC/ABS blends, and are suitable for injection molding. Formulated for the consumer and transportation markets, reSound recycled content TPE grades can be used in applications such as personal care products, lawn and garden tools, outdoor goods, office supplies, footwear, houseware durables, consumer electronics, and automotive interior and under-the-hood components. reSound™ REC VX2800-0001 I 65A Natural reSound™ REC VX2800-0001 I 65A Black reSound™ REC VX2800-0002 I 65A Black reSound™ REC VX0100-0001 AR I 80A Black Recycled Content PIR PIR PIR PIR Recycled Content, % 25% 25% 40% 30% Recycled Source Carpet Backing, Nonwovens, Films, Super Sacks Carpet Backing, Nonwovens, Films, Super Sacks Proprietary Blend Proprietary Blend Hardness, Shore A 65 65 65 80 Color Natural Black Black Black Specific Gravity 0.88 0.89 0.88 1.05 Tensile Strength, PSI 784 788 1023 1400 Elongation at Break, % 687 662 673 700 Compression Set @ Room Temperature 29 27 30 – OM Substrate PP PP PP PC, ABS, PC/ABS Processing IM or OM IM or OM IM or OM IM or OM Agency Rating – – – – NORTH AMERICA GRADES reSound™ REC VX2800-9003 C 47A Natural reSound™ REC VX2800-9004 C 54A Natural reSound™ REC VX2800-0001 C 65A Black Recycled Content PCR PCR PCR Recycled Content, % 25% 25% 25% Recycled Source Transportation Transportation Ocean-bound Plastic Hardness, Shore A 47 54 65 Color Natural Natural Black Specific Gravity 0.94 0.95 0.89 Tensile Strength, PSI 250 311 900 Elongation at Break, % 585 581 670 Compression Set @ Room Temperature – – 25 OM Substrate PP PP PP Processing IM or OM IM or OM IM or OM Agency Rating – – – Automotive Testing* – – – NORTH AMERICA GRADES *Additional testing can be performed to confirm specific customer requirements. Processing conditions can cause material properties to shift from the values stated in the information.

General information about Avient Canada ULC Membership, general purposes, duties and responsbilities, authority and committee meetings information

: 604-588 0590 (CSD) & 603-5101 2882 (Finance) E-mail address* : ar_my@clariant.com;leelee.tang@avient.com; jennifer.tung@avient.com; Contact Person*: CSD - Ms Tang Lee Lee & Ms Jennifer Tung BANK : Bank Name : Citibank Berhad Bank Address : Menara Citibank, 165 Jalan Ampang, 50450 Kuala Lumpur Bank Account Number : MYR - 0114599018 USD - 0114599069 Swift Code : CITIMYKL *Please e-mail us your payment remittance so that we can update our records. Yours faithfully, For and on behalf of, Avient Colorants Malaysia Sdn Bhd Formerly known as Clariant Masterbatches (M) Sdn Bhd This is computer generated document and no signature is require

Buyer will not use any trademark or trade names or trade dress which resemble PolyOne’s Trademarks or which would be likely to confuse or mislead any member of the public.

ONFLEX™ HT ONFLEX™ AF 7210 ONFLEX™ S KA ONFLEX™ S KG Applications Fasteners/ Clips Fasteners/ Clips Fasteners/ Clips Fasteners/ Clips Defining Characteristic High temperature sealing performance Ambient temperature sealing performance High temperature sealing performance Ambient temperature sealing performance Density 1.00 g/ml 0.99 g/ml 1.10 g/ml 1.13 g/ml Physical Properties Tensile Strength 6.0–10.0 MPa 5.0–11.5 MPa 3.0–7.5 MPa 2.6–4.9 MPa Tear Resistance 25.0–37.0 kN/m 21.0–43.0 kN/m 17.0–46.0 kN/m 16.0–29.0 kN/m Compression Set 73°F (23°C) 72hrs 12–27% 16–32% 13–23% 31–35% 158°F (70°C) 22hrs 28–44% 32–43% 29–38% 62–66% 212°F (100°C) 22hrs 45–53% 56–60% 54–57% 80–85% Hardness 40–80 Shore A 40–80 Shore A 40–80 Shore A 40–80 Shore A Overmolding Substrate Polypropylene/ Polyethylene Polypropylene Polyamide Polyamide Processing Injection Molding/ Extrusion Injection Molding/ Extrusion Injection Molding/ Extrusion Injection Molding/ Extrusion HOW GLS TPEs MAKE THE DIFFERENCE IN AUTOMOTIVE FASTENERS AND CLIPS • Low compression set – coupled with good stress relaxation, our automotive TPEs are designed to maintain a good seal over time and reduce noise generated by vibration • High temperature performance – Avient automotive TPEs provide good sealing performance in temperatures up to 100°C/212°F • Bonding performance - strong chemical bond to polypropylene, polyethylene, and polyamide • Process flexibility - grades can be both injection molded and extruded • Easy to color - can be colored at the machine • Reduced production steps - some grades do not require pre-drying • Low VOC/FOG - OnFlex HT™ has been externally tested to VDA 278 and is proven to help satisfy vehicle interior air quality (VIAQ) regulatory requirements • Single source supply – we can streamline your supply chain with the ability to provide polymer colorants, engineered thermoplastics, and thermoplastic elastomers from a single source • Global support - we provide production, technical, and commercial support in locations convenient to your operations, including North America, Europe, and Asia To learn more about GLS TPEs for automotive applications, visit www.avient.com or call +1.844.4AVIENT (1.844.428.4368). www.avient.com Copyright © 2020, Avient Corporation. Processing conditions can cause material properties to shift from the values stated in the information. Processing conditions can cause material properties to shift from the values stated in the information.