Eastern Time www.virtualshareholdermeeting.com/POL2020 Record Date Voting Matters and Vote Recommendations Proposals For Your Vote Board Recommendation 1 2 3 4 Lisa K. Wulfsohn Qualifications, Attributes, Skills and Experience: Current Directorships: Former Directorships: Age: Director since: ADVISORY VOTE PROPOSAL 2 — ADVISORY VOTE TO APPROVE NAMED EXECUTIVE OFFICER COMPENSATION Objective How Our Executive Compensation Program Achieves this Objective Our Board recommends a vote FOR this Proposal to approve, on an advisory basis, our Named Executive Officer compensation. Purpose. 2.

Figure 2. Styrenic block copolymers 2. Holden, “Application of Thermoplastic Elastomers”, 573, Thermoplastic Elastomers, 2nd edition, 1996 2.

Mold to compress and cool into shape 4 CFRTP is preheated and inserted into tool 3 Material heating, melting, and conveying 2 Solid resin infeed 1 5 ON-ROAD TRANSPORTATION Underbody shields, underhood enclosures, interior components, storage OFF-ROAD VEHICLES Skid plates, doors, seat structures, exterior panels & moldings Traditionally, molding with short and long glass-filled polypropylene to gain flexural performance over unfilled polypropylene also results in a loss of impact resistance. SPORTING GOODS Boots, bindings, protective equipment MARINE Hull reinforcement, seats, paddles 50% Long Glass Fiber Reinforced PP 50% Long Glass Fiber Reinforced PP + 0° CFRTP 50% Long Glass Fiber Reinforced PP + 0°/90° CFRTP 50% Long Glass Fiber Reinforced PP + 0°/90°/90°/0° CFRTP 17K 28K 29K 50% Long Glass Fiber Reinforced PP + 0°/90°/0° CFRTP 29K 31K +60.7% FLEXURAL STRENGTH (ASTM D7264) IMPACT RESISTANCE (ASTM D3763) 50% Long Glass Fiber Reinforced PP 50% Long Glass Fiber Reinforced PP + 0° CFRTP 50% Long Glass Fiber Reinforced PP + 0°/90° CFRTP 50% Long Glass Fiber Reinforced PP + 0°/90°/0° CFRTP 50% Long Glass Fiber Reinforced PP + 0°/90°/90°/0° CFRTP E ne rg y at T ot al ( J) Fo rc e at P ea k (k N ) 18 16 14 12 10 8 6 4 2 0 6.0 5.9 4.0 3.0 2.0 1.0 0.0 11.2 15.1 14.6 12.7 16.4 1.2 1.9 2.8 4.0 5.0 +58.3% +34.8% 50% Long Glass Fiber Reinforced PP 50% Long Glass Fiber Reinforced PP + 0° CFRTP 50% Long Glass Fiber Reinforced PP + 0°/90° CFRTP 50% Long Glass Fiber Reinforced PP + 0°/90°/90°/0° CFRTP 17K 28K 29K 50% Long Glass Fiber Reinforced PP + 0°/90°/0° CFRTP 29K 31K +60.7% FLEXURAL STRENGTH (ASTM D7264) IMPACT RESISTANCE (ASTM D3763) 50% Long Glass Fiber Reinforced PP 50% Long Glass Fiber Reinforced PP + 0° CFRTP 50% Long Glass Fiber Reinforced PP + 0°/90° CFRTP 50% Long Glass Fiber Reinforced PP + 0°/90°/0° CFRTP 50% Long Glass Fiber Reinforced PP + 0°/90°/90°/0° CFRTP E ne rg y at T ot al ( J) Fo rc e at P ea k (k N ) 18 16 14 12 10 8 6 4 2 0 6.0 5.9 4.0 3.0 2.0 1.0 0.0 11.2 15.1 14.6 12.7 16.4 1.2 1.9 2.8 4.0 5.0 +58.3% +34.8% Application design Modeling & simulation Prototyping & validation Material selection Composite/ resin compatibility Custom formulations Mold filling analysis Technical support Process optimization PROCESSING MATERIALS Material selection is crucial to an application’s success.

TEMPERATURE Material Rear °F (°C) Center °F (°C) Front °F (°C) Nozzle °F (°C) Melt °F (°C) Mold °F (°C) Nylon 6,6 14% NiCF 540–570 (280–300) 530–560 (275–290) 530–560 (275–290) 540–570 (280–300) 540–570 (280–300) 200–300 (90–150) Nylon 6,6 30% SS 540–570 (280–300) 530–560 (275–290) 530–560 (275–290) 540–570 (280–300) 540–570 (280–300) 200–300 (90–150) PBT 14% NiCF 510–410 (265–280) 490–540 (255–280) 480–530 (250–275) 480–530 (250–275) 480–530 (250–275) 150–250 (65–120) PC 14% NiCF 540–570 (280–300) 540–570 (280–300) 530–560 (275–290) 530–560 (275–290) 530–560 (275–290) 150–250 (65–120) ABS 14% NiCF 470–520 (240–270) 460–520 (240–270) 460–520 (240–270) 460–530 (240–275) 460–530 (240–275) 100–200 (40–90) PP 14% NiCF 440–480 (225–250) 440–480 (225–250) 430–470 (220–245) 420–460 (215–240) 420–460 (215–240) 125–175 (50–80) DRYING Material Temperature °F (°C) Time Minimum Moisture Maximum Moisture Nylon 6,6 14% NiCF 180 (80) 4–5 hours 0.05% 0.20% Nylon 6,6 30% SS 180 (80) 4–5 hours 0.05% 0.20% PBT 14% NiCF 250 (120) 6-8 hours 0.02% 0.03% PC 14% NiCF 250 (120) 3–4 hours 0.02% 0.02% ABS 14% NiCF 200 (90) 2–4 hours 0.05% 0.10% PP 14% NiCF 180 (80) 2–4 hours 0.20% 0.30% Equipment • Feed throats smaller than 2.5" may cause bridging due to pellet size - Larger feed throats will be more advantageous with long fiber EMI shielding resins • General purpose metering screw is recommended - Mixing/barrier screws are not recommended • L/D ratio - 18:1–20:1 (40% feed, 40% transition, 20% metering) • Low compression ratio - 2:1–3:1 • Deep flights recommended - Metering zone 3.5 mm - Feed zone 7.5 mm • Check ring - Three-piece, free-flowing check ring • General purpose nozzle (large nozzle tips are recommended) - Minimum orifice diameter of 7/32" - Tapered nozzles are not recommended for long fiber EMI shielding resins • Clamp tonnage: - 2.5–5 tons/in2 Gates • Large, free-flow gating recommended - 0.25" x 0.125" land length - 0.5" gate depth Runners • Full round gate design • No sharp corners • Minimum of 0.25" diameter • Hot runners can be used PROCESSING Screw Speed Slower screw speeds are recommended to protect fiber length Back Pressure Lower back pressure is recommended to protect fiber length Pack Pressure 60–80% of max injection pressure Hold Pressure 40–60% of max injection pressure Cool Time 10–30 seconds (depends on part geometry and dimensional stability) PROCESS CONSIDERATIONS Recommended – retain fiber length (maximize conductivity) • Low shear process • Low screw speed and screw RPM • Slow Injection speed • Fill to 99–100% on first stage of injection - Reduces potential nesting of fibers at gate location - Improves mechanical performance near gate location - Promotes ideal fiber orientation Resin Rich Surface • Achieved when using a hot mold temperature and longer cure times ≥ Max mold temperature recommendation • Improved surface aesthetic • Reduced surface conductivity • Could reduce attenuation performance in an assembly Fiber Rich Surface • Achieved when using a cold mold temperature and shorter cure times ≤ Minimum mold temperature recommendation • Improved surface aesthetic • Reduced surface conductivity • Could improve attenuation performance in an assembly www.avient.com Copyright © 2020, Avient Corporation.

11.866.POLYONE www.polyone.com MAXXAM™ FILLED & REINFORCED POLYOLEFINS PRODUCT SELECTION GUIDE 2 31.866.POLYONE www.polyone.com MAXXAM™ FILLED & REINFORCED POLYOLEFINS PolyOne manufactures a complete line of filled and reinforced polymer polyolefins for injection molding and blow molding. This product selection guide provides detailed information to help you select the Maxxam product that’s right for your application. 4 INJECTION MOLDING POLYPROPYLENE Product Code - - - PP5113 B44 F5134T2-4 PP5130 B63 F5134T4-1 Filler Percentage - % - 13 20 30 40 Tensile Strength Yield psi ASTM D638 5000 4800 4600 4500 MPa ISO 527 33 33 32 31 Tensile Elongation Yield % ASTM D638 6 4 3 2 ISO 527 Break % ASTM D638 60 30 15 10 ISO 527 Flexural Modulus 73°F (23°C) psi ASTM D790 300,000 360,000 400,000 460,000 MPa ISO 178 2300 2450 2900 3300 Notched Izod Impact 73°F (23°C) ft-lb/in ASTM D256 0.65 0.60 0.55 0.50 kJ/m2 ISO 180 3.50 3.3 3.00 2.75 Heat Deflection 66 psi °F ASTM D648 230 240 260 275 °C ISO 75 110 116 127 135 264 psi °F ASTM D648 130 140 150 175 °C ISO 75 54 60 66 79 Specific Gravity 73°F (23°C) - ASTM D792 0.99 1.04 1.15 1.25 ISO 1183 Linear Shrinkage Range 1/8 in wall % - 1.2–1.6 1.0–1.4 0.8–1.2 0.6–1.0 3.2 mm wall % - 1.2–1.6 1.0–1.4 0.8–1.2 0.6–1.0 Product Code - - - PP6113 A77-SM PP6120 B16-2 PP6130 B11 PP6135 B40-UV Filler Percentage - % - 13 20 30 35 Tensile Strength Yield psi ASTM D638 4350 3500 2600 3700 MPa ISO 527 30 24 18 26 Tensile Elongation Yield % ASTM D638 5 4 7 6 ISO 527 Break % ASTM D638 35 70 150 70 ISO 527 Flexural Modulus 73°F (23°C) psi ASTM D790 290,000 280,000 280,000 390,000 MPa ISO 178 2000 1950 1750 2700 Notched Izod Impact 73°F (23°C) ft-lb/in ASTM D256 0.7 2.7 4.5 0.65 kJ/m2 ISO 180 4.0 14 24 3.5 Heat Deflection 66 psi °F ASTM D648 239 215 225 250 °C ISO 75 115 102 107 123 264 psi °F ASTM D648 140 125 130 150 °C ISO 75 60 52 54 60 Specific Gravity 73°F (23°C) - ASTM D792 0.99 1.05 1.15 1.18 ISO 1183 Linear Shrinkage Range 1/8 in wall % - 1.1–1.5 .9–1.3 0.7–1.1 0.5–0.9 3.2 mm wall % - 1.1–1.5 .9–1.3 0.7–1.1 0.5–0.9 Maxxam™ Talc-Filled Copolymer Polypropylene • Scratch & mar resistant • UL approved • FDA certifiable • Natural, black or colors • High flow grades • UV stabilized • UL approved • FDA certifiable • Natural, black or colors • High flow grades • UV stabilized • Recycled content Maxxam™ Talc-Filled Homopolymer Polypropylene Offers a moderate level of impact strength and improved stiffness and heat deflection performance. Offers a high level of stiffness and heat resistance as well as excellent impact resistance • Chemically coupled • UL approved • FDA certifiable • Natural, black or colors • High flow grades • Recycled content • Chemically coupled • UL approved • FDA certifiable • Natural, black or colors • High flow grades • UV stabilized INJECTION MOLDING POLYPROPYLENE Product Code - - - PP5410 B1 PP5420 B1 PP5430 B5 PP5440 B1 Reinforcement % - - - 10 20 30 40 Specific Gravity 73°F (23°C) - ASTM D792 0.96 1.05 1.14 1.23 ISO 1183 Tensile Strength Yield psi ASTM D638 8000 10000 11500 13000 MPa ISO 527 55 69 79 90 Tensile Elongation Break % ASTM D638 8 2 2 2 ISO 527 Flexural Modulus 73°F (23°C) psi ASTM D790 525,000 795,000 850,000 1,000,000 MPa ISO 178 3600 5450 5800 7550 Notched Izod Impact 73°F (23°C) ft-lb/in ASTM D256 1.10 1.30 1.50 1.60 kJ/m2 ISO 180 6.00 7.25 8.25 8.50 Heat Deflection 66 psi °F ASTM D648 280 305 310 315 °C ISO 75 138 152 154 157 264 psi °F ASTM D648 250 280 290 300 °C ISO 75 121 138 143 149 Linear Shrinkage Range 1/8 in wall % - 0.4–0.7 0.3–0.6 0.3–0.6 0.2–0.5 3.2 mm wall % - 0.4–0.7 0.3–0.6 0.3–0.6 0.2–0.5 Product Code - - - PP7410 A241 PP7420 B77 PP6430 A206-UV PP6435 B1 Reinforcement % - - - 10 20 30 35 Specific Gravity Yield - ASTM D792 0.98 1.05 1.14 1.17 ISO 1183 Tensile Strength Yield psi ASTM D638 5300 9200 9000 13300 MPa ISO 527 37 64 62 92 Tensile Elongation Break % ASTM D638 8 4 4 4 ISO 527 Flexural Modulus 73°F (23°C) psi ASTM D790 240,000 420,000 695,000 810,000 MPa ISO 178 1650 2900 4800 5600 Notched Izod Impact 73°F (23°C) ft-lb/in ASTM D256 5.0 1.60 1.60 2.50 kJ/m2 ISO 180 27.5 9.00 9.00 14.00 Heat Deflection 66 psi °F ASTM D648 298 313 297 300 °C ISO 75 144 156 152 149 264 psi °F ASTM D648 210 272 265 288 °C ISO 75 92 133 128 142 Linear Shrinkage Range 1/8 in wall % - 0.4–0.7 0.3–0.6 0.3–0.6 0.2–0.5 3.2 mm wall % - 0.4–0.7 0.3–0.6 0.3–0.6 0.2–0.5 Maxxam™ Glass Fiber Reinforced Homopolymer Polypropylene PROPERTY CONDITION UNITS METHOD PRODUCT EXAMPLES Maxxam™ Glass Fiber Reinforced Copolymer Polypropylene 71.866.POLYONE www.polyone.com INJECTION MOLDING POLYPROPYLENE Product Code - - - PP5312 B1 PP5320 A285 PP5330 A123 PP5340 B2 Reinforcement % - % - 12 20 30 40 Specific Gravity 73°F (23°C) - ASTM D792 0.99 1.05 1.15 1.24 ISO 1183 Tensile Strength Yield psi ASTM D638 4800 4400 3600 4900 MPa ISO 527 31 30 32 38 Tensile Elongation Yield % ASTM D638 5 4 4 3 ISO 527 Break % ASTM D638 20 15 20 10 ISO 527 Flexural Modulus 73°F (23°C) psi ASTM D790 285,000 380,000 355,000 460,000 MPa ISO 178 1950 2600 2450 3200 Notched Izod Impact 73°F (23°C) ft-lb/in ASTM D256 0.6 0.55 1.5 0.60 kJ/m2 ISO 180 3.30 3.00 8.25 3.30 Heat Deflection 66 psi °F ASTM D648 235 255 230 280 °C ISO 75 113 124 110 138 264 psi °F ASTM D648 135 156 150 180 °C ISO 75 57 69 66 82 Linear Shrinkage Range 1/8 in wall % - 1.4–1.9 1.0–1.4 1.1–1.5 0.6–1.0 3.2 mm wall % - 1.4–1.9 1.0–1.4 1.1–1.5 0.6–1.0 Offers improved stiffness and heat deflection as well as outstanding dimensional stability. • Chemically coupled • Natural or black • High flow grades • Recycled content Maxxam™ Mica Reinforced Polypropylene PROPERTY CONDITION UNITS METHOD PRODUCT EXAMPLES Maxxam™ Glass/Mineral Reinforced Polypropylene Offers a high level of stiffness and heat deflection as well as reduced warpage and increased dimensional stability. • Chemically coupled • Impact modified • Natural or black • High flow grades • Recycled content Product Code - - - PP5920 B10 PP5935 B1 PP5940 B131 PP5950 B10 Reinforcement Type - - - Glass/Mica Glass/Mica Glass/Mica Glass/Mica Reinforcement % - % - 20 35 40 50 Specific Gravity 73°F (23°C) - ASTM D792 1.05 1.17 1.25 1.34 ISO 1183 Tensile Strength Yield psi ASTM D638 7000 9000 10,000 12,800 MPa ISO 527 Tensile Elongation Break % ASTM D638 6 5 5 2 ISO 527 Flexural Modulus 73°F (23°C) psi ASTM D790 550,000 780,000 870,000 1,300,000 MPa ISO 178 3900 5500 5800 9000 Notched Izod Impact 73°F (23°C) ft-lb/in ASTM D256 0.7 0.9 1.3 1.5 kJ/m2 ISO 180 4.0 5.0 7.0 8.0 Heat Deflection 66 psi °F ASTM D648 304 315 310 315 °C ISO 75 151 157 154 157 264 psi °F ASTM D648 225 298 290 310 °C ISO 75 107 148 143 154 Maxxam™ XST Thermoplastic Olefins (TPO) Offers exceptional stiffness to impact balance including excellent cold temperature impact resistance. • Scratch & mar resistant • Natural, black or colors • High flow grades • UV stabilized Product Code - - - TP9000 A3 TP9110 A701-SM TP9120 B397 TP9120 A525-SM TP9130 A954 Reinforcement Type - - - Talc Talc Talc Talc Talc Reinforcement % - % - 5 11 18 20 30 Specific Gravity 73°F (23°C) - ASTM D792 0.94 0.97 1.01 1.04 1.12 ISO 1183 Tensile Strength Yield psi ASTM D638 2400 3000 2750 3600 3450 MPa ISO 527 18 22 19 25 24 Tensile Elongation Yield % ASTM D638 12 6 5 4 8 ISO 527 Break % ASTM D638 >400 100 170 30 250 ISO 527 Flexural Modulus 73°F (23°C) psi ASTM D790 140,000 260,000 235,000 300,000 325,000 MPa ISO 178 1100 1800 1620 2000 2250 Notched Izod Impact 73°F (23°C) ft-lb/in ASTM D256 No Break 6 10 2 2.2 kJ/m2 ISO 180 68.0 36.0 53.0 11.0 12.0 -30°C ft-lb/in ASTM D256 1.5 1.2 1.3 0.7 0.8 kJ/m2 ISO 180 8.5 6.0 7.0 3.9 4.0 Heat Deflection 66 psi °F ASTM D648 160 208 205 220 218 °C ISO 75 83 98 96 110 105 264 psi °F ASTM D648 100 143 140 160 160 °C ISO 75 50 62 57 70 71 Multiaxial Impact @ 6.6 m/s 0°C ASTM D3763 100% Ductile 100% Ductile 100% Ductile -30°C ASTM D3763 100% Ductile 100% Ductile PROPERTY CONDITION UNITS METHOD PRODUCT EXAMPLES INJECTION MOLDING POLYPROPYLENE 8 91.866.POLYONE www.polyone.com Maxxam™ HST Filled Polypropylene with High Strength and Stiffness Maxxam™ LO Low Odor Talc-Filled Polypropylene Reinforced grades that provide exceptional levels of strength and stiffness.

Wulfsohn Qualifications, Attributes, Skills and Experience: Current Directorships: Former Directorships: Age: Director since: ADVISORY VOTE PROPOSAL 2 — ADVISORY VOTE TO APPROVE NAMED EXECUTIVE OFFICER COMPENSATION Objective How Our Executive Compensation Program Achieves this Objective Our Board recommends a vote FOR Proposal 2 to approve, on an advisory basis, our Named Executive Officer compensation. Accounting Considerations Stock Ownership and Retention Guidelines COMPENSATION DISCUSSION AND ANALYSIS Stock Ownership Target (in shares) Total Share Ownership as of 2/28/19 Timing with Respect to Equity Award Grants. Other Benefits. 2018 Grants of Plan-Based Awards Target ($) (d) Estimated Future Payouts Under Equity Incentive Plan Awards Exercise or Base Price of Option Awards ($/Sh) (i) Threshold (#) (f) Estimated Future Payouts Under Non- Equity Incentive Plan Awards Name (a) Grant Date (b) Grant Date Fair Value of Stock and Option Awards ($) (j) Threshold ($) (c) Maximum ($) (e) All Other Stock Awards: Number of Shares of Stock or Units (#) (h) Target (#) (g) EXECUTIVE COMPENSATION Estimated Future Payouts Under Non-Equity Incentive Plan Awards (columns (c), (d) and (e)) (1) 2018 Annual Incentive Program Payments (2) Cash-Settled Performance Units.

Has an immediate family member who is a current partner of the Company’s internal or external auditor, or who is a current employee of the Company’s internal or external auditor and personally works on the Company’s audit; 2 E. All such actions, interpretations and determinations that are done or made by the Board in good faith will be final, conclusive and binding. 2. Qualification Standards; Composition of the Board Director Independence; Categorical Independence Standards Qualification Criteria Conflicts of Interest Service on Other Boards Change in Director’s Employment Retirement Policy Policy of the Board of Directors Relating to Majority Voting 2.

2 Devlet Görevlilerine Rüşvet 2 Ticari Rüşvet 2 Kolaylaştırma Ödemeleri ve Komisyonlar 3 Temsilciler, Distribütörler ve Diğer Üçüncü Taraflarla Çalışmak 3 Durum Tespiti ve Onay Süreci 3 Uyarı İşaretleri 3 Muhasebe ve Kayıt Tutma Zorunlulukları 4 Olası İhlallerin Bildirilmesi 4 Avient Etik Yardım Hattı 4 Misillemeye Karşı Koruma 4 Hızlı Referans: ABAC YAPILACAKLAR VE YAPILMAYACAKLAR 5 1 Küresel Rüşvet ve Yolsuzluk Karşıtı Politika Avient dünyanın her yerinde tüm ticari faaliyetlerinde, sahtecilik, rüşvet ve diğer yolsuzluk uygulamalarını yasaklamıştır. Bizim Sorumluluğumuz Avient adına hareket eden tüm Avient yetkilileri, çalışanları ve üçüncü taraflar bu Politikayı anlamaktan ve bunlara uymaktan sorumludur ve her biri şu yükümlülüklere sahiptir: • Politikanın yürürlükte olan yönlerini bilmek ve bunları astlarına aktarmak • Belirli bir durumda Politikanın uygulanıp uygulanmayacağı ya da herhangi bir eylemde bulunup bulunulmayacağının açık olmaması durumunda soru sormak • Üçüncü taraflar aracılığıyla yürütülen ticari faaliyetleri düzgün şekilde yönetmek ve izlemek • Olası görevi kötüye kullanma belirtileri ya da kanıtlarına karşı uyanık olmak • Uygun olan kanallar aracılığıyla, ihlal ve şüphelenilen ihlalleri derhal bildirmek ABAC Yasaları, herhangi bir şirket veya kişinin, işi sürdürmek veya garantiye almak veya başka bir uygunsuz iş avantajı elde etmek için herhangi bir kişiye 2 değerli bir şey teklif etmesini, vaat etmesini, ödemesini veya ödemeye yetki vermesini yasa dışı hale getirir. ABAC Yasalarına uymak için, Avient adına hareket eden hiçbir çalışan veya üçüncü taraf, bu rüşvetin aşağıdaki anlamlara geleceği herhangi bir biçimdeki hediye, ağırlama veya değerli herhangi bir şeyi, doğrudan veya dolaylı olarak, kimseye teklif etmemeli veya kimseden almamalıdır: • İş almak ya da mevcut işi elde tutmak • İş kararlarını etki altına almak • Adil olmayan bir avantaj sağlamak 2 Buna herhangi bir devlet memuru ve/veya özel sektör çalışanı dahildir İçindekiler 2 ABAC Yasaları geniş kapsamlıdır ve çok geniş bir şekilde yorumlanabilir.

Forward – Looking Statements Page 2 • This presentation includes the use of both GAAP (generally accepted accounting principles) and non-GAAP financial measures. EPS: $2.50 Assumptions • Operating margins in mid-range of 2015 targets • No global recession • No investment in incremental PP&S capacity • Completion of 2-3 midsize accretive acquisitions • Housing starts at 85% of 50 year norm by 2015 • Mid single digit revenue CAGR • Remain comfortably below 3X Net Debt / EBITDA Page 11 2012 Rev: $2.9B Adj. August 13 - Jefferies 2013 Investor Presentation non-GAAP v2 (2).pdf Reconciliation to Condensed Consolidated Balance Sheets

Audit 2. ITEM 2. Audit 2.