KEY CHARACTERISTICS • Manufactured at four ISO 13485 certified sites, providing global consistency and increased security of supply • Documented change control beyond CAS number reducing risk of change • Non-phthalate and formulated without animal- derived substances • Available for use in a wide range of polymers including polyolefins, styrenics, polycarbonate and alloys, polyester, POM • Functionality can be combined with colorants into convenient combination concentrates and ready-to-use formulations REGULATORY SUPPORT • Raw materials tested to: - ISO 10993-1 and USP biological evaluation - European Pharmacopeia 3.1.3/3.1.5 (polyolefin) - USP (polyethylene) - ICH Q3D elemental impurities • Registered Drug Master File (Type III) and/or Device Master File • Food contact established with FDA/EU* APPLICATION BULLETIN * FDA/EU compliance information available upon request FUNCTIONALITY TARGET APPLICATIONS DRUG DELIVERY DEVICES SYRINGES & NEEDLES DIAGNOSTICS CATHETERS Clarifying PP Sorbitol-free for transparent applications with reduced migration and improved thermal stability     Lubricant— permanent/ non-migrating Fast acting reduction in friction for wide variety of polymers such as PP, ABS, POM, PC Protection from UV in transparent applications for PP, PE, PETG, COP UV blocking in 290-450nm with no impact on clarity; can be combined with colors (e.g., amber)   Antistatic ready-to- use solution for PP, ABS, PC/ABS Permanent/non-migrating; fast decay time independent of % relative humidity  Gamma/e-beam sterilization protection of the polymer Preserving the properties of PP and COC/COP; reduction in yellowing using Color Compensation Technology (CCT) Reduced material consumption/cycle time—nucleation Fast acting new generation nucleant for PE and PP; improved thermal and mechanical properties allows wall thinning; reduction of tolerance/dimensional problems between different colors Laser marking replacing ink printing/labels Solvent-free, high-speed identification for Nd/YAG laser for PE,PP, ABS, PC, POM     Antioxidants for PE, PP, TPE Thermal protection during converting/downstream sterilization    Brand protection/ anticounterfeit Covert and non-covert systems   Healthcare use limitations apply—see below.

Versaflex™ OM3060 PP包覆成型 硬度 法规 灭菌 特性 28A 环氧乙烷 柔软的半透明材料，粘性好 43A 环氧乙烷 高度可着色的解决方案， 粘性好，不易压缩变形 42A/ 50A 环氧乙烷 透明的耐高温级材料； ABS、PC可粘合 60A 环氧乙烷/蒸汽 弹性高，不易压缩变形 20A-90A 环氧乙烷 用途广泛，无填充 ABS，PC包覆成型 硬度 法规 灭菌 特性 40A USP VI级，ISO 10993 环氧乙烷 半透明 60A USP VI级，ISO 10993 环氧乙烷 透明 VERSAFLEX™ CL与DYNAFLEX™ 包覆成型，符合人体 工程学设计 触感柔软，有利于形成良好的表面 有多种颜色效果和纹理可供选择 提高抓握力、缓冲力和舒适度 提高性能表现，如密封性能、减震、隔氧、 耐刮擦和耐磨性能 降低装配成本，加工性能良好 可牢固包覆于各种基材上 血糖仪 医用工具包覆成型 注射笔 分析仪器 Dynaflex™ G2706 Dynaflex™ G2711 Versaflex™ CL2242 & CL2250 Versaflex™ G2705 N Versaflex™ HC3810 Versaflex™ OM1040 US食品接触 USP VI级，ISO 10993 材料描述 硬度 法规 灭菌 特性 45A USP VI级 55A USP VI级 70A USP VI级 43A 环氧乙烷 34A USP VI级， ISO 10993-4/5 FDA，USP VI级， ISO 10993 57A 挤出级，耐高温 再密封，压缩变形性能提高 摩擦低 Versalloy™ HC 9210-55N Versalloy™ HC 9210-70N Versalloy™ HC 9220-43N Versaflex™ HC 2110-35N Versaflex™ HC 2110-57B FDA，USP VI级， ISO 10993 环氧乙烷 加工性能良好，表面光洁、美观 环氧乙烷 环氧乙烷 加工性能良好，表面光洁、美观 加工性能良好，表面光洁、美观 高压灭菌、环氧乙烷、 高压灭菌、环氧乙烷、 VERSALLOY™ HC与VERSAFLEX™ HC 密封和再密封 柔软的橡胶质感 无抽芯，静态推塞被刺穿后再密封性良好 满足动态密封的低摩擦系数要求 可萃取物含量低 适合在聚烯烃上包覆成型 密封和密封隔膜 密封件和卫生垫圈 注射器推塞和塞头 Versalloy™ HC 9210-45N 材料描述 硬度 法规 灭菌 特性 65A/ 75A/ 84A 54A 67A 高压灭菌器 透明度高，不含增塑剂，无油 工作温度高，可高温灭菌 环氧乙烷、辐射灭菌 Versaflex™ HC MT555 Versaflex™ HC BT218 VERSAFLEX™ CL与DYNAFLEX™ 高透明度级，不含增塑剂 无色透明级，配方不含邻苯二甲酸酯增塑剂 符合医疗法规USP VI级和ISO 10993-4、5的 要求 食品接触用并符合FDA标准 可高压灭菌和辐射灭菌 可萃取物含量低 透明度高（雾度50 4.1, 100 4.5, 100 4, 70 6, 70 拉伸模量（MPa） 2200 2700 2600 2350 1820 1820 挠曲强度（MPa） 80 90 104 86 68 68 挠曲模量（MPa） 2500 2700 2500 2300 1980 1590 HDT：0.45、1.8（MPa） 110, 80 90, 80 100, 89 123, 100 123, 64 100, 70 UL-94等级，3.0mm 5VA V-0 5VA V-0 HB V-0 UL-94等级，1.5mm V-0 V-0 5VB V-0 HB V-0 UL-94等级，0.75mm V-1 V-2 V-0 无 无 V-2 竞争材料对比 医疗保健特种工程聚合物配方 TRILLIANT™ HC热塑性塑料 Trilliant™ HC高性能热塑性弹性体系列配方是专为应对日趋严苛的医疗器械和设备而开发的。 TRILLIANT™ HC8920 TRILLIANT™ HC2020 Trilliant™ HC2020 材料描述 基料 共聚酯 Trilliant™ HC8910/8920 聚酮/ABS共混物 Trilliant™ HC2120 Tritan Trilliant™ HC3120 PC Trilliant™ HC5210 PP Trilliant™ HC6010 PA6 Trilliant™ HC6610 PA66 Trilliant™ GRV-NP-110-W PA12 TRILLIANT™ HC热塑性塑料 作为FR PC/ABS、FR PC/PET和FR COPE的 耐化学性替代品，在各种颜色的应用中，其 阻燃等级在1.5mm和0.75mm厚度下分别可 达到UL 94黄卡V-0级和V-1级。 在对普通消毒剂的耐受性方面优于PC/ABS、 PC/PET和COPE 暴露在普通医院消毒剂下72小时后仍能保持 抗拉强度，相较于PC混合物和COPE，具有 更出色的长期耐化学性 具有良好的抗冲击性和耐热性 有自然色等级、标准医用颜色或定制预着色 产品可供选择 医疗设备外壳 核磁共振成像、X射线、CT扫描仪部件 手术器械，如吻合器、解剖器、剪刀等 自动注射笔 测试项 比重 熔体流动指数 （230OC， 2.16KG） 抗拉强度 挠曲强度 挠曲模量 冲击强度 缺口，IZOD 测试项 方法 ASTM D-792 ASTM D-1238 ASTM D-638 ASTM D-790 ASTM D-790 ASTM D-256 ASTM D-257 单位 -- g/10min MPa MPa MPa J/m Ohms/sq.

Base Resin PC PC/PSU PES PEI PP ABS PEEK PA Barrel Temperatures* °F (°C) Rear Zone 530–560 (277–293) 550–575 (288–302) 660–700 (349–371) 675–725 (357–385) 390–420 (199–216) 425–460 (219–238) 680–730 (360–388) 430–500 (221–260) Center Zone 515–560 (269–288) 540–565 (282–296) 650–690 655–710 (352–377) 380–405 (193–207) 415–450 (213–232) 670–710 (354–377) 420–490 (216–254) Front Zone 510–525 (266–274) 530–555 (277–291) 640–680 (338–360) 655–700 (346–371) 370–395 (188–202) 405–440 (207–227) 410–480 (210–249) Nozzle 520–535 (271–280) 540–565 (282–296) 650–690 665–710 (352–377) 380–400 (193–204) 415–450 (213–232) 660–700 (349–371) 420–490 (216–254) Melt Temperature 525–560 (274–293) 530–580 (277–304) 650–700 (343–371) 660–730 (349–388) 375–395 (191–202) 410–460 (210–238) 650–730 (343–388) 420–500 (216–260) Mold Temperature 175–250 (80–121) 160–220 (71–104) 280–350 (138–177) 275–350 (135–177) 100–135 (38–57) 150–180 (66–82) 300–425 (149–219) 160–230 (71–110) Pack & Hold Pressure 50%–75% of Injection Pressure Injection Velocity in/s 0.5–2.0 Back Pressure psi 50 Screw Speed rpm 40–70 40–70 40–70 40–70 40–70 40–70 40–70 40–70** Drying Parameters °F (°C) 6 hrs @ 250 4 hrs @ 250 4 hrs @ 275 (135) 4 hrs @ 250 3 hrs @ 300 (150) 2 hrs @ 200 (93) 3 hrs @ 275 (135) 4 hrs @ 180 (82) Cushion in 0.125–0.250 Screw Compression Ratio 2.0:1–2.5:1 2.0:1–2.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 Nozzle Type General General General General General General General Reverse Taper Clamp Pressure 5–6 Tons/in2 * A reverse temperature profile is important to obtain optimum conductive properties. Cut vent depths to: - PC Compounds: 0.001"–0.002" depth and 0.250" width - PC/PSU Compounds: 0.002"–0.003" depth and 0.250" width - PES Compounds: 0.003"–0.004" depth and 0.250" width - PEI Compounds: 0.001"–0.003" depth and 0.250" width - PP Compounds: 0.001"–0.002" depth and 0.250" width - ABS Compounds: 0.0015"–0.0025" depth and 0.250" width - PEEK Compounds: 0.002"–0.004" depth and 0.250" width - Nylon Compounds: 0.002" min. depth and 0.250" width • Increase vent depth to 0.040" (1.0mm) at 0.250" (4.0mm) away from the cavity and vent to atmosphere.

These include PE, PP, ABS, SAN, PC/ABS, PC, PA6, 66 and 12, cyclic olefins (COP), high performance polymers, and elastomers such as EVA, SEBS, TPU and PEBA. ADDING VALUE TO A WIDE RANGE OF HEALTHCARE APPLICATIONS PROVIDING STANDARD AND CUSTOM COLORANTS & ADDITIVES STANDARD COLOR RANGES To speed up time to market, Avient offers a standard range of colorants using pre-tested raw materials suitable for a wide range of polymers including PE, PP, PEBA, PC, and others. APPLICATION PORTFOLIO DESCRIPTION General use Opaque and transparent colors in PP, PE, COC, ABS, POM, PC, TPU, PEEK, and more Needle hubs and cannulae Opaque and translucent colors evaluated to ISO 6009 Ophthalmic caps and closures 13 standard colors in PE matched to American Academy of Ophthalmology; biologically evaluated to USP standard White pharmaceutical packaging White colorants for PE, HDPE, PP covering solid dose to nasal packaging needs Amber pharmaceutical packaging Pre-tested amber colorants LSR silicones For LSR silicones and transparent color PET/PP (e.g. amber) FUNCTIONALITY ADDITIVE PERFORMANCE UV protection in transparent packaging Blocks UV in 290–450nm for PP, PE, PETG, COP Processing aid/friction reduction Optimizes processing for PE, PP, ABS, POM—non-migrating Nucleation for reduced material consumption/cycle time Improves thermal and mechanical properties of PE and PP and allows wall thinning to support sustainability Clarifying Improves clarity of transparent PP applications with reduced migration and improved thermal stability—sorbitol-free Laser marking/welding Activates the polymer to absorb Nd-YAG laser for fast reliable marking/assembly Gamma/e-beam sterilization Preserves the properties of PP and COP, reduces yellowing and compensates for discoloration Anti-static Reduces static buildup in applications such as films in API handling and inhaler spacers/nebulizers Antioxidant Provides thermal protection during converting/ downstream sterilization Anti-counterfeit/brand protection Covert and non-covert systems SUPPORTING SUSTAINABILITY TARGETS As the need to integrate sustainability in the design of healthcare products is growing, manufacturers of medical devices, diagnostic products and pharmaceutical packaging are looking for materials with a more environmentally friendly profile.

PRODUCT BULLETIN VERSAFLEX™ GP 2810-40N AM VERSAFLEX™ CE 3120-65* AM ONFLEX™ LO 7120-45 AM Applications Personal care grips Consumer packaging Consumer electronics Charging stations HVAC seals Cup holder mats Color Natural Natural Natural Durometer, Shore A 45 66 45 Specific Gravity (kg/m3) 0.87 1.14 1.13 Tensile Strength (PSI) 650 1200 585 Elongation % 700 600 685 Modulus @ 300% |(PSI) 260 585 300 Injection Moldable Yes Yes Yes OM Substrate PP PC, ABS, PC/ABS, COPE PP TECHNICAL PROPERTIES *UL listing does not apply; testing can be completed if required by the customer Copyright © 2021, Avient Corporation.

Requirements: Excellent clarity, scratch resistance and exceptional toughness for visualization of medicant levels Avient Distribution HC Portfolio: Acrylic, copolyester, PC 2. Requirements: Excellent clarity, scratch resistance and exceptional toughness Avient Distribution HC Portfolio: Acrylic, copolyester, PC, clarified PP Visual Identification Use colors and additives to differentiate and identify your brand, product or batch. Requirements: Light diffusing optical properties Avient Distribution HC Portfolio: Light diffusing acrylics, PC 16.

Versaflex™ TPE PORTABLE SPEAKER SOLUTIONS WATER AND DUST PROTECTION, DURABLE LOOK AND FEEL CE 3120-40 CE 3620 CE 3115 CE 3120-80 Application Gaskets Skins Skins Skins Product Aesthetics Tacky Translucent 42A 65A 65A 80A Special Characteristics Low compression set Low compression set High flow Abrasion resistance High strength Improved scratch/ mar, UV and abrasion Overmolding HOW VERSAFLEX TPEs MAKE THE DIFFERENCE IN PORTABLE SPEAKERS APPLICATIONS GASKETS Water and Dust Protection - Tight housing seals with no leakage over time Reduced Manufacturing Costs - Eliminates sourcing and assembly steps required of O-rings by overmolding directly onto the substrate; strong adhesion to PC & ABS - Faster cycle times than silicone or TPU Design Freedom - Injection molding TPEs in gaskets enables complex designs in which simple O-rings would be challenging to assemble SPEAKER SKINS Durable Look and Feel - Silky feel soft touch - Long lasting aesthetics with abrasion and UV resistance Reduced Manufacturing Costs - Eliminates sourcing and assembly steps required of silicone skins by overmolding directly onto the substrate; strong adhesion to PC & ABS - Faster cycle times than silicone or TPU Design Freedom - Overmolding TPE removes the need for mechanical interlocks and primers to get silicone materials to adhere to substrates To learn more about Versaflex TPEs for portable speakers, contact Avient at +1.844.4AVIENT.

Polypropylene (PP) Polyethylene (PE) Polystyrene (PS) Thermoplastic Elastomer (TPE) Thermoplastic Polyurethane (TPU) Polyamide (PA) Copolyester (CoPET) Thermoplastic Vulcanizates (TPV) Polycarbonate (PC) Acrylonitrile Butadiene Styrene (ABS) Polycarbonate/ABS (PC/ABS) www.avient.com Copyright © 2020, Avient Corporation.

Base Resin ABS PA PBT PC PE PEEK PP PPS Barrel Temperatures °F (°C) Rear Zone 400–475 (200–250) 480–540 (248–282) 480–520 (250–270) 480–570 (250–300) 400–445 (200–230) 660–700 (350–475) 400–440 (200–225) 520–600 (270–300) Center Zone 410–480 (205–253) 490–550 (254–287) 485–525 (251–273) 500–580 (260–305) 410–455 (207–237) 670–710 (357–385) 410–450 (205–230) 550–610 (285–310) Front Zone 420–490 (210–257) 500–560 (260–293) 490–530 (254–276) 515–590 (267–310) 420–465 (213–243) 680–720 (363–400) 420–455 (215–235) 570–620 (300–320) Nozzle 425–500 (215–260) 530–600 (275–315) 700–730 (370–395) 430–460 (220–240) 610–620 (320–325) Melt Temperature 425–515 (215–270) 530–615 (275–325) 430–495 (220–260) 700–725 (370–385) 610–635 (320–335) Mold Temperature 140–200 (60–90) 150–300 (65–148) 140–280 (60–137) 160–240 (70–115) 300–400 (150–200) 190–300 (90–150) Drying Parameters 190 (90) 2–4 Hours 0.01%–0.15% 180 (82) 4–5 Hours 0.10%–0.20% 275 (135) 0.02%–0.04% 250 (125) 0.02% 300 (150) 0.10% 280 (135) 2–3 Hours 0.01%–0.20% Nozzle Type General Purpose Nylon or Reverse Taper General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose Injection Velocity1 2–5 in/sec; 50–127 mm/sec Injection Pressure Medium to high (may range from 1,000–4,000 psi; 7-28 Mpa) Back Pressure 50–100 psi; 0.3–0.7 Mpa Screw Speed 25–75 RPM Cushion 0.125–0.250 in; 3–6 mm Screw Compression Ratio2 2.0:1–2.5:1 Processing Guide 3 Base Resin ABS PA PBT PC PE PEEK PP PPS Barrel Temperatures °F (°C) Rear Zone 400–475 (200–250) 480–540 (248–282) 480–520 (250–270) 480–570 (250–300) 400–445 (200–230) 660–700 (350–475) 400–440 (200–225) 520–600 (270–300) Center Zone 410–480 (205–253) 490–550 (254–287) 485–525 (251–273) 500–580 (260–305) 410–455 (207–237) 670–710 (357–385) 410–450 (205–230) 550–610 (285–310) Front Zone 420–490 (210–257) 500–560 (260–293) 490–530 (254–276) 515–590 (267–310) 420–465 (213–243) 680–720 (363–400) 420–455 (215–235) 570–620 (300–320) Nozzle 425–500 (215–260) 530–600 (275–315) 700–730 (370–395) 430–460 (220–240) 610–620 (320–325) Melt Temperature 425–515 (215–270) 530–615 (275–325) 430–495 (220–260) 700–725 (370–385) 610–635 (320–335) Mold Temperature 140–200 (60–90) 150–300 (65–148) 140–280 (60–137) 160–240 (70–115) 300–400 (150–200) 190–300 (90–150) Drying Parameters 190 (90) 2–4 Hours 0.01%–0.15% 180 (82) 4–5 Hours 0.10%–0.20% 275 (135) 0.02%–0.04% 250 (125) 0.02% 300 (150) 0.10% 280 (135) 2–3 Hours 0.01%–0.20% Nozzle Type General Purpose Nylon or Reverse Taper General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose Injection Velocity1 2–5 in/sec; 50–127 mm/sec Injection Pressure Medium to high (may range from 1,000–4,000 psi; 7-28 Mpa) Back Pressure 50–100 psi; 0.3–0.7 Mpa Screw Speed 25–75 RPM Cushion 0.125–0.250 in; 3–6 mm Screw Compression Ratio2 2.0:1–2.5:1 Comments 1. PC Compounds: 0.001"–0.002" depth and 0.250" width PC/PSU Compounds: 0.002"–0.003" depth and 0.250" width PES Compounds: 0.003"–0.004” depth and 0.250" width PEI Compounds: 0.001"–0.003” depth and 0.250" width PP Compounds: 0.001"–0.002” depth and 0.250" width ABS Compounds: 0.0015"–0.0025” depth and 0.250" width PEEK Compounds: 0.002"–0.004” depth and 0.250" width Nylon Compounds: 0.002" min. depth and 0.250" width Increase vent depth to 1.0mm (0.040") at 4.0mm (0.250") away from the cavity and vent to atmosphere.

LUBRIONE™ INTERNALLY LUBRICATED FORMULATIONS PRODUCT SELECTION GUIDE PRODUCT DESCRIPTION UNITS TEST METHOD NN–000/15T NN–20GF– 10GB/13T–2S NN–30GF/10T WHITE LB8900-0001 30GF/15T LB8900-0002 30GF/13T-2S LB8900-0003 18T-2S ATT–000/5T AT–000/18T– 2S NATURAL 5209 FPL 20 PS–30GF/2S LB5210–0237 1B NATURAL PC–10CF/15T Base Polymer PA 66 PA 66 PA 66 PK PK PK POM POM POM PBT PP PC General Properties Specific Gravity g/cm3 ASTM D792 1.23 1.46 1.47 1.56 1.55 1.33 1.38 1.47 1.51 1.54 1.13 1.31 Molding Shrinkage ASTM D955 Flow % 1.0–2.0 0.20–0.50 0.50–1.0 0.30–0.60 0.20–0.40 1.7–2.3 1.5–2.0 2.0–3.0 2.0–3.0 0.20–0.40 0.10–0.30 0.10–0.30 Water Absoprtion (23°C, 24 hr.) % ASTM D570 0.8 – 0.050–1.0 0.3 0.4 0.4 0.050 – 0.050 – – – Mechanical Properties Tensile Modulus(1) MPa ASTM D638 2650 9650 9790 8050 7380 1250 965 1770 2420 8620 4140 – Tensile Strength(1) (Yield) MPa ASTM D638 61.4 119 122 119 94 47 35 40 45 108 72.4 90 Tensile Elongation(1) (Break) % ASTM D638 3.0–5.0 1.0–3.0 1.5 3 2 35 40 30 26 3 – – Flexural Modulus MPa ASTM D790 2760 6890 6890 7380 6410 1300 1080 1740 1790 6690 4840 5500 Flexural Strength MPa ASTM D790 108 172 214 182 167 55 41.4 62.7 68.3 165 110 130 Coefficient of Friction ASTM D1894 vs. Steel – Static 0.25 0.46 0.18 0.15 0.12 0.19 0.11 0.14 0.13 0.24 0.17 0.17 Impact Notched Izod Impact (23°C, 3.18 mm, Injection Molded) J/m ASTM D256A 41 64(6) 110 107 107 70 80 37 37 75 – 69 Thermal Properties Heat Deflection Temperature ASTM D648 0.45 MPa °C 215(6) – 250 215 216 184 152 151(6) 153(6) 218(6) – – 1.8 MPa °C 65(6) 239(7) 244(6) 210 210 75 94 81.1(6) 88 197(6) – 135(5) Electrical Properties Surface Resistivity ohms/sq ASTM D254 – – – 1.30x1012 1.9x1012 5.2x1012 – – – – – 1.0x109 Dielectric Strength (Short Time) kV/mm – – 8.5 – – – – – – – – – Flammability Flame Rating Class UL 94 HB – – HB HB HB – HB – – – – LubriOne™ Internally Lubricated Formulations NOTES (1) Type I, 5.1mm/min (2) Type I, 21.3 mm/min (3) Type I, 50 mm/min (4) Type I, 5.1mm/min, Break (5) 3.2 mm thick, Unannealed (6) 6.35 mm thick, Unannealed (7) 3.2 mm thick, Annealed PRODUCT DESCRIPTION UNITS TEST METHOD 5024 RS HI 5021 RS S1 5021 RS X2 5019 X1 LB6700- 5001 RS AF Black NN- 000/01M Black SO REC LB6600- 5030 RS Grey LB3300- 5010 RS LB3300- 5005 RS REC LB3220- 5001 RS C Natural X1 5010 GP Grey 5006 RS PE 5004 RS PE LB4200- 5022 Black LB4200- 5023 Base Polymer PA 6 PA6/PA66 PA66 PBT PC PKE POM Lubricant UHMWPE1 UHMWPE UHMWPE UHMWPE UHMWPE MoS22 Graphite UHMWPE UHMWPE UHMWPE Graphite UHMWPE UHMWPE MoS2 UHMWPE Filler type GF10 GF30 GF30 GF50 GF50 Unfilled GF33 GF20 MI20 GF10 Unfilled GF20 GF30 Unfilled Unfilled General Properties Specific Gravity g/cm3 ISO 1183 1.18 1.35 1.39 1.55 1.58 1.14 1.44 1.42 1.46 1.23 1.26 1.34 1.43 1.4 1.35 Mechanical Properties Tensile Modulus (23°C) MPa ISO 527-1 4250 9500 9000 15500 16600 3500 10600 6300 3330 4000 1630 5300 9250 2470 2150 Tensile Strength (Yield, 23°C) MPa ISO-527-2 97 150 160 205 200 85 164 102 55 60 60 108 99.1 55 50 Tensile Elongation (Break, 23°C) % ISO-527-2 12 2.5 3 2.7 2.4 3.4 2.0 4.2 8 2.5 46 3.7 1.5 11 11 Flexural Strength (23°C) MPa ISO 178 103 – – 285 265 108 215 127 78 85 38 155 117 73 68 Flexural Modulus (23°C) MPa ISO 178 3250 – – 12400 11100 2690 9000 4700 3000 3100 1380 4600 5450 2210 2070 Impact Charpy Notched Impact Strength (23°C, Injection Molded) kJ/m^2 ISO 179 14 12 10 15 10 3 6 7.7 4.3 12 15 10 7.6 8 5 Charpy Unnotched Impact Strength (23°C, Injection Molded) kJ/m^2 ISO 179 82 55 61 75 60 65 50 47 69 - NB 63 36 NB NB Thermal Properties Deflection Temperature Under Load 1.8 Mpa, Unannealed °C ISO 75-2/A 107 – – 204 – 73 235 – – – 90 210 204 86 80 Cofficient of Friction (CoF) & Wear Rate CoF vs.