Một “viên chức chính phủ” có thể là bất cứ ai thực hiện quyền lực của chính phủ hoặc là người làm việc cho hoặc là một đại diện của một tổ chức thuộc sở hữu của chính phủ hoặc do chính phủ kiểm soát. Thanh toán Bôi trơn và Lại quả Thanh toán bôi trơn là các khoản phí không chính thức cho viên chức chính phủ để tạo điều kiện (đẩy nhanh tiến độ) cho việc phê duyệt một số loại hoạt động. Vì lý do đó, điều quan trọng là Avient thực hiện thẩm định đối với các đại lý và các bên thứ ba khác cả trước và trong khi hợp tác với họ.

PolyOne manages the implementation of GHS so as to accurately reflect the properties of our products, and while we do not anticipate wholesale changes to the documents that accompany our solutions because of the change, we do believe some changes will be evident. Why we are doing this in early 2014: GHS format for mixtures of chemicals will be a requirement in the U.S. and European Union in June 2015, but is already a reality in much of the world.

All products passed the OEKO-TEX® 100-2 standard, do not include plasticizers, and contain lower VOCs than traditional adhesive solutions. Values reported as “typical” or stated without a range do not state minimum or maximum properties; consult your sales representative for property ranges and min/max specifications.

This new color and special effects option helps polymer packaging do just that. Values reported as “typical” or stated without a range do not state minimum or maximum properties; consult your sales representative for property ranges and min/max specifications.

Values reported as “typical” or stated without a range do not state minimum or maximum properties; consult your sales representative for property ranges and min/max specifications. Unlike flexible PVC, which loses flexibility over time, Avient materials do not fail over the MCCB’s service life (approximately 10 years).

PHTHALATES DO NOT EASILY MIGRATE They are often chosen for use because they don’t easily migrate out of materials. They are tightly held within the vinyl and have low volatility, so they do not readily evaporate. Values reported as “typical” or stated without a range do not state minimum or maximum properties; consult your sales representative for property ranges and min/max specifications.

Centros de design e tecnologia ColorWorks™ – São Paulo entregou mais de 20 cores personalizadas e aprovadas, utilizando o conhecimento do mercado e das tendências. Learn what Avient is doing to support a sustainable future (Chinese language version). Learn what Avient is doing to support a sustainable future.

Syncure™ XLPE Formulaciones Para Polietileno Reticulable PARA CABLES DE BAJA TENSIÓN GUÍA DE SELECCIÓN DE PRODUCTO Syncure™ XLPE POLIETILENO RETICULABLE POR HUMEDAD PARA AISLAMIENTO PARA CABLES DE BAJA TENSIÓN SISTEMA S100FH S100FH-XUV S100FH-UV S100FV S100FV-UV S112NA S120NA S200FH S200FV Aplicaciones Cable para construcción, bandeja de cables Cable para construcción, bandeja de cables Cable fotovoltaico (PV) Cable para construcción, bandeja de cables Cable para construcción, bandeja de cables Cable para construcción, Teck-90 Tuberia Cable para edificaciones, tray cables, cables de servicio Cable para edificaciones, tray cables, cables de servicio Especificaciones UL 44 UL 44 UL 44, UL 4703 UL 44 UL 44 CSA 22.2 Usable para NSF 61 UL 44 UL 44 Tipo de alambre XHHW-2, RHW-2, USE-2, SIS XHHW-2, RHW-2, USE-2, SIS XHHW-2, RHW-2, USE-2, SIS, PV XHHW-2, RHW-2, SIS XHHW-2, RHW-2, USE-2, SIS, PV RW-90, Teck-90 – RHW-2, RHW, RHH, XHHW-2, XHH, XHHW, SIS RHW, RHH, RHW-2 % de componentes 83% S1054A 17% V0022G RoHS 83% S1054A 17% V0022G-UV RoHS 70% S1054A 30% V0022G-UV RoHS 50% S1054A 50% V0044G RoHS 50% S1054A 50% V0044G-UV RoHS 95% S1054A 5% S1000B 95% S1016A 5% S1037B 78% S1054A 22% SC5400-0002 RoHS MB ALT FR 50% S1054A 50% SC5400-0003 RoHS MB ALT FR Caracteristicas Flama horizontal Flama horizontal, resistencia UV, posibilidad de colorear Flama horizontal, flama FV-1, resistencia UV, posibilidad de colorear VW-1 VW-1, resistencia UV, posibilidad de colorear Sin retardante a la flama Para aplicaciones de tuberia Flama horizontal, libre de DBDPE VW-1, libre de DBDPE PROPIEDADES GENERALES Gravedad Específica 1.01 1.02 1.10 1.31 1.31 0.92 0.95 1.01 1.31 Rigidez Shore D, 10 Segundos 47 47 47 48 48 47 59 47 48 % de Contenido de Gel 68 68 70 70 70 72 72 68 70 PROPIEDADES DE RESISTENCIA A LA TRACCIÓN Resistencia a la Tracción (psi) 2800 2500 2500 3200 2650 2800 4500 2800 3200 % de Elongación 400 400 400 470 540 400 80 400 470 % de Retención de Tracción 100 100 97 110 110 95 75 95 100 % de Retención de Elongación 90 90 94 100 100 90 75 90 93 PROPIEDADES ELÉCTRICAS Resistencia Dieléctrica (V/mil) 1000 1400 1400 1200 1200 1000 –– 1000 1200 Constante Dieléctrica 2.31 2.45 2.61 2.61 2.61 2.24 2.1 2.31 2.61 % de Factor de Disipación 0.0012 0.0080 0.008 0.0043 0.0043 0.0008 0.002 0.0012 0.0043 PROPIEDADES TÉRMICAS Condiciones Nominales de Temperatura en °C 90 90 90 90 90 90 125 90 90 % de Deformación Térmica 10 10 5 5 5 10 10 10 5 La cartera Syncure XLPE es un sistema de dos pasos de Polietileno reticulable por humedad, injertado con Silano. Estos materiales ofrecen dos ventajas distintas del Polietileno normal: mejora altamente la resistencia al calor y al aceite. Values reported as “typical” or stated without a range do not state minimum or maximum properties; consult your sales representative for property ranges and min/max specifications.

GUIDELINES FOR USING CESA CLEAN ADDITIVES • Cesa Clean works best when molded maintaining normal (injection) pressure/shear • For best results, Avient recommends a “Running Color Change” which eliminates breaks in the molding cycle • Since the Cesa Clean concentrate will expand, it is recommended to reduce the shot size by 20% • It is designed for use at a let-down ratio (LDR) of 3.0% or (33:1); however, use rate can vary depending on the severity of the contamination but typically is 2.0–4.0% (a use rate higher than 6.0% may not have any positive affect on the cleaning performance) • Using Cesa Clean as a routine part of your color change rotation will allow faster changes and consume a minimal amount of raw material - Note: If the manifold is not cleaned routinely, this process may be more time consuming and additional material will be required • It is best to process at your normal polymer processing temperatures - For best performance, stock temperature should be at least 400°F - If 400°F is achieved during the purging process, no additional activation will occur during the reprocessing of regrind - All parts produced during the “Running Purge Cycle” should be captured as regrind, resulting in a scrap-free color change - If using sequential gates, open and close all gates at the same time while purging the tool - If contamination appears to be coming from one gate, open and close first, and for an extended period of time, to force more material through this location - When cleaning in this manner, pay close attention to shot size - Parts containing the previous or new color plus any Cesa Clean can be used as regrind INTRODUCING CESA CLEAN TO YOUR PROCESS Hand Blend • Hand weigh enough of the Cesa Clean and natural resin mix to equate to 3–5 times the barrel capacity • Use rate should be 3.0% or 33:1 for routine cleaning • For difficult-to-clean tooling, or tooling which is not routinely cleaned, start at 4.0% or 25:1 • Note: Do not attempt to vacuum load more than 15 feet from source as stratification/separation may occur Volumetric Feeder • Calibrate feeder to dispense 3.0% or 33:1 for routine cleaning • For difficult-to-clean tooling, or tooling which is not routinely cleaned, start at 4.0% or 25:1 • This style of feeder is highly recommended for at-the-throat metering of Cesa Clean Blending Units Most blenders have an extra bin for an additive • Fill the additive bin with Cesa Clean • Set blender to introduce the Cesa Clean at 2.0 to 4.0% • Note: Do not air convey any further than 15 feet as Cesa Clean has a high density and may separate from the mix. Values reported as “typical” or stated without a range do not state minimum or maximum properties; consult your sales representative for property ranges and min/max specifications.

ONFLEX™ HT ONFLEX™ AF 7210 ONFLEX™ S KA ONFLEX™ S KG Applications Fasteners/ Clips Fasteners/ Clips Fasteners/ Clips Fasteners/ Clips Defining Characteristic High temperature sealing performance Ambient temperature sealing performance High temperature sealing performance Ambient temperature sealing performance Density 1.00 g/ml 0.99 g/ml 1.10 g/ml 1.13 g/ml Physical Properties Tensile Strength 6.0–10.0 MPa 5.0–11.5 MPa 3.0–7.5 MPa 2.6–4.9 MPa Tear Resistance 25.0–37.0 kN/m 21.0–43.0 kN/m 17.0–46.0 kN/m 16.0–29.0 kN/m Compression Set 73°F (23°C) 72hrs 12–27% 16–32% 13–23% 31–35% 158°F (70°C) 22hrs 28–44% 32–43% 29–38% 62–66% 212°F (100°C) 22hrs 45–53% 56–60% 54–57% 80–85% Hardness 40–80 Shore A 40–80 Shore A 40–80 Shore A 40–80 Shore A Overmolding Substrate Polypropylene/ Polyethylene Polypropylene Polyamide Polyamide Processing Injection Molding/ Extrusion Injection Molding/ Extrusion Injection Molding/ Extrusion Injection Molding/ Extrusion HOW GLS TPEs MAKE THE DIFFERENCE IN AUTOMOTIVE FASTENERS AND CLIPS • Low compression set – coupled with good stress relaxation, our automotive TPEs are designed to maintain a good seal over time and reduce noise generated by vibration • High temperature performance – Avient automotive TPEs provide good sealing performance in temperatures up to 100°C/212°F • Bonding performance - strong chemical bond to polypropylene, polyethylene, and polyamide • Process flexibility - grades can be both injection molded and extruded • Easy to color - can be colored at the machine • Reduced production steps - some grades do not require pre-drying • Low VOC/FOG - OnFlex HT™ has been externally tested to VDA 278 and is proven to help satisfy vehicle interior air quality (VIAQ) regulatory requirements • Single source supply – we can streamline your supply chain with the ability to provide polymer colorants, engineered thermoplastics, and thermoplastic elastomers from a single source • Global support - we provide production, technical, and commercial support in locations convenient to your operations, including North America, Europe, and Asia To learn more about GLS TPEs for automotive applications, visit www.avient.com or call +1.844.4AVIENT (1.844.428.4368). Values reported as “typical” or stated without a range do not state minimum or maximum properties; consult your sales representative for property ranges and min/max specifications. Values reported as “typical” or stated without a range do not state minimum or maximum properties; consult your sales representative for property ranges and min/max specifications.