GEON M3700 GRAY 2774 GEON C90065 GRAY 2696 PP FR 8-6 LMS-1000

SILCOGUM GRAY 76624 SILCOGUM GRAY 77052 PP FR 8-6 LMS-1000

MC-85138PET OC GRAY MC-85346PV GRAY PP FR 8-6 LMS-1000

UV GRAY ABS GRAY 104622 PP FR 8-6 LMS-1000

MC-8077P GRAY 12272 MC-82372PE GRAY 430C PP FR 8-6 LMS-1000

SILCOPAS GRAY 107774 SILCOPAS GRAY 107776NU SILCOPAS GRAY 107779

Parameters NM5600-8002 RS NM5600-8004 RS Drying Temperature 100–120°C 100–130°C Drying Time 4–6 hours 4–6 hours Barrel Temperature °C °C Rear Zone 250–270 260–270 Central Zone 260–280 270–290 Front Zone 270–295 290–305 Nozzle 290–300 290–300 Mold Temperature 80–100 80–100 Screw Speed Moderate Moderate Back Pressure 3–10bar 3–10bar Cushion stroke 5–10% of plasticizing stroke 5–10% plasticizing of stroke Injection Speed Medium Medium Injection Pressure Medium–high Medium–high Holding Pressure 30–50% of injection pressure 20–40% of injection pressure Screw Type General purpose General purpose Screw L/D 20:1 20:1 Screw Compression Ratio 2.5:1 2.5:1 Non-return Check Valve Free flow check ring Free flow check ring Nozzle Type Reverse taper Reverse taper Barrel Capacity 30–80% of barrel should be used Processing Guide 2 Start Up & Shut Down Recommendations Purge Compound 1. 2–3 melt flow PP or purging compound.

LUBRIONE™ INTERNALLY LUBRICATED FORMULATIONS PRODUCT SELECTION GUIDE PRODUCT DESCRIPTION UNITS TEST METHOD NN–000/15T BLACK NN–20GF– 10GB/13T–2S BLACK NN–30GF/10T WHITE LB8900-0001 30GF/15T NATURAL LB8900-0002 30GF/13T-2S NATURAL LB8900-0003 18T-2S NATURAL ATT–000/5T BLACK AT–000/18T– 2S NATURAL 5209 FPL 20 NATURAL PS–30GF/2S NATURAL LB5210–0237 1B NATURAL PC–10CF/15T BLACK Base Polymer PA 66 PA 66 PA 66 PK PK PK POM POM POM PBT PP PC General Properties Specific Gravity g/cm3 ASTM D792 1.23 1.46 1.47 1.56 1.55 1.33 1.38 1.47 1.51 1.54 1.13 1.31 Molding Shrinkage ASTM D955 Flow % 1.0–2.0 0.20–0.50 0.50–1.0 0.30–0.60 0.20–0.40 1.7–2.3 1.5–2.0 2.0–3.0 2.0–3.0 0.20–0.40 0.10–0.30 0.10–0.30 Water Absoprtion (23°C, 24 hr.) % ASTM D570 0.8 – 0.050–1.0 0.3 0.4 0.4 0.050 – 0.050 – – – Mechanical Properties Tensile Modulus(1) MPa ASTM D638 2650 9650 9790 8050 7380 1250 965 1770 2420 8620 4140 – Tensile Strength(1) (Yield) MPa ASTM D638 61.4 119 122 119 94 47 35 40 45 108 72.4 90 Tensile Elongation(1) (Break) % ASTM D638 3.0–5.0 1.0–3.0 1.5 3 2 35 40 30 26 3 – – Flexural Modulus MPa ASTM D790 2760 6890 6890 7380 6410 1300 1080 1740 1790 6690 4840 5500 Flexural Strength MPa ASTM D790 108 172 214 182 167 55 41.4 62.7 68.3 165 110 130 Coefficient of Friction ASTM D1894 vs.

PG 122277.00 PEARL WT PP GEON 87416 GRAY PP FR 8-6 LMS-1000

AM GRAY 187756 N-COOL GRAY 7 (PP-17) PP FR 8-6 LMS-1000