All products passed the OEKO-TEX® 100-2 standard, do not include plasticizers, and contain lower VOCs than traditional adhesive solutions. KEY CHARACTERISTICS • High-wearing comfort and elastic recovery • Strong and seamless adhesion to polyester and nylon fabrics • Passed OEKO-TEX 100-2 testing • Excellent washability at up to 60°C • Non-toxic formulations with low volatile organic compounds (VOC) and without added plasticizers • Attractive alternative to conventional TPU adhesive film and glue MARKETS & APPLICATIONS Versaflex TF Adhesive TPE solutions have been custom engineered for: • Elastic strips in underwear • Seam tapes in sports and fitness apparel PRODUCT BULLETIN 1.844.4AVIENT www.avient.com Copyright © 2024, Avient Corporation.

In addition, its customers have an obligation to comply with Federal Energy Regulatory Commission (FERC)2 physical security requirements. Using GlasArmor panels, Ballisti-Wall® and Ballisti- Cover ® solutions enable utility companies to add a superior level of protection to critical components and meet FERC security requirements within a modular, adaptable construction. 1 https://www.nbcnews.com/news/us-news/three-substations- attacked-washington-state-rcna63214 2 https://www.ferc.gov/sites/default/files/2020-04/E-4_10.pdf © 2023, All Rights Reserved Avient Corporation, 33587 Walker Road, Avon Lake, Ohio USA 44012 To learn more about Avient’s advanced composite solutions, visit www.avient.com/composites.

Zone 2 - Center 420°F 460°F 215°C 235°C Zone 3 - Front 430°F 470°F 220°C 240°C Nozzle 440°F 480°F 225°C 250°C Melt & Mold Temperatures English (°F) Metric (°C) Comments Melt Temperature 440°F 480°F 225°C 250°C Wipe down mold surface after each production run.Mold Temperature 125°F 200°F 50°C 90°C Notes These guidelines are based on lab results, and their values may not reflect actual processes using different machinery. Drying Conditions English (°F) Metric (°C) Temperature 180°F 80°C Duration 2-4 Hours Moisture Level Allowable 0.05%–0.20% Processing Screw Speed Typical screw speeds are recommended Back Pressure Lower back pressure is recommended Pack Pressure 60 - 80% of max injection pressure Hold Pressure 40 - 60% of max injection pressure Cool Time 10 - 30 seconds (depends on part geometry and dimensional stability) www.avient.com Copyright © 2020, Avient Corporation.

Density Impact Flexural Modulus (Dry) Tensile Strength (Dry) HDT Equilibrium Moisture — PKE-GF PA12-GF PA612-GF 5 4 3 2 1 0 Impact Shrink Flexural Modulus (Dry) Chemical Resistance Flexural Modulus (Cond.) CO2 Emission Factor — PKE-GF — PA6-GF — PA66-GF HDT Wear Density 5 4 3 2 1 0 Equilibrium Moisture 1: Poor 3: Good 5: Excellent

AFNOR M 2 in France, DIN 4102 B 2–B 1 in Germany, UNI 8457–9174 C 1 in Italy, BKZ 5.2 in Switzerland, BS 5852.1990 CRIB 3–5 in UK)** • Standard portfolio available for PP injection molded applications APPLICATION BULLETIN * Laboratory weathering testing may not be determinative of all conditions of use; the end user must determine suitability of a product for its intended use ** Contact us for more information on regulatory compliance Copyright © 2022, Avient Corporation.

Versaflex™ PKG 4345, 4355, 4365 Versaflex™ PKG 4465 Versaflex™ PKG 4570 Versaflex™ PKG 4665 Hardness Shore A 45A, 55A, 65A 65A 70A 65A Regulatory* • REACH SVHC • FDA 21 CFR • EU 10/2011 • REACH SVHC • FDA 21 CFR • REACH SVHC • FDA 21 CFR • REACH SVHC • FDA 21 CFR Color Translucent Translucent Natural Natural Overmolding Bonds To Polypropylene Polypropylene Polar substrates Polar substrates Chemical Resistance • #1 for soaps • Low-cost solution for non-polar oils • #2 for soaps • Some oils • #1 for polar & non-polar oils • #1 for non-polar solvents, like isododecane • #2 for non-polar oils • Abrasion resistance * Regulatory compliance is offered for consideration only—limitations apply; please check with product stewardship.

By 2030, Avient will reduce Scope 1 & 2 greenhouse gas (GHG) emissions by 60% with 2019 as a baseline and achieve operational carbon neutrality by 2050. Update: • We are proud to have reached our original target of 35% in 2020 by reducing our Scope 1 & 2 GHG emissions by 37%

11.866.POLYONE www.polyone.com MAXXAM™ FILLED & REINFORCED POLYOLEFINS PRODUCT SELECTION GUIDE 2 31.866.POLYONE www.polyone.com MAXXAM™ FILLED & REINFORCED POLYOLEFINS PolyOne manufactures a complete line of filled and reinforced polymer polyolefins for injection molding and blow molding. Offers a high level of stiffness and heat resistance as well as excellent impact resistance • Chemically coupled • UL approved • FDA certifiable • Natural, black or colors • High flow grades • Recycled content • Chemically coupled • UL approved • FDA certifiable • Natural, black or colors • High flow grades • UV stabilized INJECTION MOLDING POLYPROPYLENE Product Code - - - PP5410 B1 PP5420 B1 PP5430 B5 PP5440 B1 Reinforcement % - - - 10 20 30 40 Specific Gravity 73°F (23°C) - ASTM D792 0.96 1.05 1.14 1.23 ISO 1183 Tensile Strength Yield psi ASTM D638 8000 10000 11500 13000 MPa ISO 527 55 69 79 90 Tensile Elongation Break % ASTM D638 8 2 2 2 ISO 527 Flexural Modulus 73°F (23°C) psi ASTM D790 525,000 795,000 850,000 1,000,000 MPa ISO 178 3600 5450 5800 7550 Notched Izod Impact 73°F (23°C) ft-lb/in ASTM D256 1.10 1.30 1.50 1.60 kJ/m2 ISO 180 6.00 7.25 8.25 8.50 Heat Deflection 66 psi °F ASTM D648 280 305 310 315 °C ISO 75 138 152 154 157 264 psi °F ASTM D648 250 280 290 300 °C ISO 75 121 138 143 149 Linear Shrinkage Range 1/8 in wall % - 0.4–0.7 0.3–0.6 0.3–0.6 0.2–0.5 3.2 mm wall % - 0.4–0.7 0.3–0.6 0.3–0.6 0.2–0.5 Product Code - - - PP7410 A241 PP7420 B77 PP6430 A206-UV PP6435 B1 Reinforcement % - - - 10 20 30 35 Specific Gravity Yield - ASTM D792 0.98 1.05 1.14 1.17 ISO 1183 Tensile Strength Yield psi ASTM D638 5300 9200 9000 13300 MPa ISO 527 37 64 62 92 Tensile Elongation Break % ASTM D638 8 4 4 4 ISO 527 Flexural Modulus 73°F (23°C) psi ASTM D790 240,000 420,000 695,000 810,000 MPa ISO 178 1650 2900 4800 5600 Notched Izod Impact 73°F (23°C) ft-lb/in ASTM D256 5.0 1.60 1.60 2.50 kJ/m2 ISO 180 27.5 9.00 9.00 14.00 Heat Deflection 66 psi °F ASTM D648 298 313 297 300 °C ISO 75 144 156 152 149 264 psi °F ASTM D648 210 272 265 288 °C ISO 75 92 133 128 142 Linear Shrinkage Range 1/8 in wall % - 0.4–0.7 0.3–0.6 0.3–0.6 0.2–0.5 3.2 mm wall % - 0.4–0.7 0.3–0.6 0.3–0.6 0.2–0.5 Maxxam™ Glass Fiber Reinforced Homopolymer Polypropylene PROPERTY CONDITION UNITS METHOD PRODUCT EXAMPLES Maxxam™ Glass Fiber Reinforced Copolymer Polypropylene 71.866.POLYONE www.polyone.com INJECTION MOLDING POLYPROPYLENE Product Code - - - PP5312 B1 PP5320 A285 PP5330 A123 PP5340 B2 Reinforcement % - % - 12 20 30 40 Specific Gravity 73°F (23°C) - ASTM D792 0.99 1.05 1.15 1.24 ISO 1183 Tensile Strength Yield psi ASTM D638 4800 4400 3600 4900 MPa ISO 527 31 30 32 38 Tensile Elongation Yield % ASTM D638 5 4 4 3 ISO 527 Break % ASTM D638 20 15 20 10 ISO 527 Flexural Modulus 73°F (23°C) psi ASTM D790 285,000 380,000 355,000 460,000 MPa ISO 178 1950 2600 2450 3200 Notched Izod Impact 73°F (23°C) ft-lb/in ASTM D256 0.6 0.55 1.5 0.60 kJ/m2 ISO 180 3.30 3.00 8.25 3.30 Heat Deflection 66 psi °F ASTM D648 235 255 230 280 °C ISO 75 113 124 110 138 264 psi °F ASTM D648 135 156 150 180 °C ISO 75 57 69 66 82 Linear Shrinkage Range 1/8 in wall % - 1.4–1.9 1.0–1.4 1.1–1.5 0.6–1.0 3.2 mm wall % - 1.4–1.9 1.0–1.4 1.1–1.5 0.6–1.0 Offers improved stiffness and heat deflection as well as outstanding dimensional stability Chemically coupled • Impact modified • Natural or black • High flow grades • Recycled content Product Code - - - PP5920 B10 PP5935 B1 PP5940 B131 PP5950 B10 Reinforcement Type - - - Glass/Mica Glass/Mica Glass/Mica Glass/Mica Reinforcement % - % - 20 35 40 50 Specific Gravity 73°F (23°C) - ASTM D792 1.05 1.17 1.25 1.34 ISO 1183 Tensile Strength Yield psi ASTM D638 7000 9000 10,000 12,800 MPa ISO 527 Tensile Elongation Break % ASTM D638 6 5 5 2 ISO 527 Flexural Modulus 73°F (23°C) psi ASTM D790 550,000 780,000 870,000 1,300,000 MPa ISO 178 3900 5500 5800 9000 Notched Izod Impact 73°F (23°C) ft-lb/in ASTM D256 0.7 0.9 1.3 1.5 kJ/m2 ISO 180 4.0 5.0 7.0 8.0 Heat Deflection 66 psi °F ASTM D648 304 315 310 315 °C ISO 75 151 157 154 157 264 psi °F ASTM D648 225 298 290 310 °C ISO 75 107 148 143 154 Maxxam™ XST Thermoplastic Olefins (TPO) Offers exceptional stiffness to impact balance including excellent cold temperature impact resistance

The issuance of orders by Buyer implies full acceptance of these Terms and Conditions which shall prevail over Buyer's terms and conditions in the event they contradict or deviate from these Terms and Conditions. 2. A Vevő rendeléseinek leadása együtt jár jelen Általános Szerződési Feltételek teljes elfogadásával, amelyek a Vevő szerződési feltételeit megelőzve is érvényesülnek, amennyiben azok ellentétesek vagy eltérnek a jelen Általános Szerződési Feltételektől. 2. Eladó jogosult egy adott Termékmennyiséget mennyiségi eltéréssel szállítani, ami a Vevő által megrendelt mennyiségektől függően változhat, az alábbiak szerint: (1) 50-99 kg között +/- 25 %; (2) 100-249 kg között +/- 15 %; (3) 250-499 kg között +/- 10 %; (4) 500 kg felett +/- 5 %.

Figure 2. Styrenic block copolymers 2. Holden, “Application of Thermoplastic Elastomers”, 573, Thermoplastic Elastomers, 2nd edition, 1996 2.