Dyneema®, the world’s strongest fiber™, enables unmatched levels of performance and protection for end-use applications, including ballistic personal protection, marine and sustainable infrastructure and outdoor sports  

GUIDELINES FOR USING CESA CLEAN ADDITIVES • Cesa Clean works best when molded maintaining normal (injection) pressure/shear • For best results, Avient recommends a “Running Color Change” which eliminates breaks in the molding cycle • Since the Cesa Clean concentrate will expand, it is recommended to reduce the shot size by 20% • It is designed for use at a let-down ratio (LDR) of 3.0% or (33:1); however, use rate can vary depending on the severity of the contamination but typically is 2.0–4.0% (a use rate higher than 6.0% may not have any positive affect on the cleaning performance) • Using Cesa Clean as a routine part of your color change rotation will allow faster changes and consume a minimal amount of raw material - Note: If the manifold is not cleaned routinely, this process may be more time consuming and additional material will be required • It is best to process at your normal polymer processing temperatures - For best performance, stock temperature should be at least 400°F - If 400°F is achieved during the purging process, no additional activation will occur during the reprocessing of regrind - All parts produced during the “Running Purge Cycle” should be captured as regrind, resulting in a scrap-free color change - If using sequential gates, open and close all gates at the same time while purging the tool - If contamination appears to be coming from one gate, open and close first, and for an extended period of time, to force more material through this location - When cleaning in this manner, pay close attention to shot size - Parts containing the previous or new color plus any Cesa Clean can be used as regrind INTRODUCING CESA CLEAN TO YOUR PROCESS Hand Blend • Hand weigh enough of the Cesa Clean and natural resin mix to equate to 3–5 times the barrel capacity • Use rate should be 3.0% or 33:1 for routine cleaning • For difficult-to-clean tooling, or tooling which is not routinely cleaned, start at 4.0% or 25:1 • Note: Do not attempt to vacuum load more than 15 feet from source as stratification/separation may occur Volumetric Feeder • Calibrate feeder to dispense 3.0% or 33:1 for routine cleaning • For difficult-to-clean tooling, or tooling which is not routinely cleaned, start at 4.0% or 25:1 • This style of feeder is highly recommended for at-the-throat metering of Cesa Clean Blending Units Most blenders have an extra bin for an additive • Fill the additive bin with Cesa Clean • Set blender to introduce the Cesa Clean at 2.0 to 4.0% • Note: Do not air convey any further than 15 feet as Cesa Clean has a high density and may separate from the mix. GETTING STARTED TIMING IS THE KEY TO A RUNNING COLOR CHANGE Hand Blend • Have the purge blend ready to load • If hopper contains a mixture of resin, color and/ or regrind, it should be run dry or drained before beginning the color change, keeping the screw full so press cycle continues • Run the main resin hopper dry or shut off hopper to hand feed at the throat • Once press is clean, slide hopper in place and proceed with next color-resin blend • The next color can be added while Cesa Clean is still in the barrel • When splay is no longer visible in parts, reset shot size, parts should be ready to pack (Single) Volumetric/Gravimetric Metering Unit at the Throat • Empty and clean feeder while press continues to run • Add Cesa Clean to the feeder color hopper and calibrate to a 3.0% use rate • When press is clean, start next color • When splay is no longer visible in parts, reset shot size, parts should be ready to pack • Note: If an open/unused secondary feeder is installed, use it for the Cesa Clean concentrate Central Blending Unit • Thoroughly clean unit while continuing to mold parts, keeping a resin feed to the press • Using a clean open hopper or regrind hopper, add the Cesa Clean concentrate • Set blender for additive/color to 3.0% • Once press is clean, drain hopper and/or central blending unit while continuing to mold parts • Begin new color and continue to mold parts • When splay is no longer visible in parts, reset shot size, parts should be ready to pack Process Adjustments That Can Help • Increase back pressure • Increase screw speed • Increase injection speed (in some tools maximum injection speed can facilitate cleaning) • Reduce mold close time (faster cycle) • Always remember a stock temperature of 400°F is essential When press and tool are clean, return all settings to standard production process profile.

Our range includes both standard and custom solutions that comply with UL 94 V-2, V-0, and 5VA ratings, with many grades offer high Relative Thermal Index (RTI) ratings and a Glow Wire Flammability Index (GWFI) up to 960°C. This literature shall NOT operate as permission, recommendation, or inducement to practice any patented invention without permission of the patent owner. • UL 94 V-2, V-0, and 5VA ratings • Elevated RTI ratings and GWFI (IEC 60695-11-10) up to 960°C • Injection molding and extrusion grades • Low dielectric performance with selected formulations • Good recyclability • Colorable KEY CHARACTERISTICS

HANDLING AND USAGE RATES Triple A is a dispersion which can be supplied individually or in combination with other ColorMatrix colorant and additive technologies. ColorMatrix will recommend the best use rate depending on the expected level of AA following processing, storage conditions and the final desired AA level in the packaged product. This additive technology can be implemented during PET processing without impact on production efficiency. 0 10 20 30 40 50 60 70 80 0.050 0.1 0.15 0.2 % A A Re du ct io n % Use Rate Anthranilamide 0 10 20 30 40 50 60 70 80 90 .04 .06 .08.020 0.1 0.16 0.180.140.12 0.2 % A A Re du ct io n % Triple A-1+ 1.844.4AVIENT www.avient.com Copyright © 2022, Avient Corporation.

Para garantizar una relación mutuamente beneficiosa y productiva, Avient requiere que todos nuestros proveedores y sus empleados, agentes de personal y subcontratistas (denominados colectivamente "Proveedores") cumplan plenamente las leyes y reglamentos aplicables y se adhieran a las normas internacionales de protección del medio ambiente, El Código de Conducta para Proveedores de Avient articula nuestras expectativas sociales, medioambientales y éticas para nuestros proveedores. En cumplimiento de lo anterior, esperamos que nuestros Proveedores cumplan con: • Suministrar sólo metales 3TG libres de conflicto a Avient, aplicar la diligencia debida a las cadenas de suministro siguiendo un procedimiento de diligencia debida reconocido nacional o internacionalmente; • Si se le solicita, informar a Avient sobre su proceso de diligencia debida y certificar que los metales 3TG suministrados a Avient desde los Países Cubiertos están libres de conflicto; y • Informar inmediatamente a Avient de cualquier cambio en la cadena de suministro en relación con el origen de los metales 3TG o la situación de conflicto. • Permitir a los empleados y otras partes interesadas comunicar preguntas o preocupaciones relacionadas con su empresa, su personal o sus productos. • Defender la libertad de asociación y el derecho a negociación colectiva de conformidad con la legislación aplicable. Ética y Gobernanza • Llevar a cabo todas las negociaciones comerciales de forma responsable, ética y legalmente. • Disponer de las licencias, registros y certificaciones necesarias para ejercer su actividad en los lugares donde opera. • Proporcionar todas las propuestas por escrito con copia directa de la correspondencia comercial a los profesionales de contratación y compras adecuados. • Abstenerse de ofrecer a los empleados de Avient dinero, préstamos, créditos, descuentos perjudiciales, regalos, productos o servicios para su uso o beneficio personal.

Känslig personlig information avser uppgifter som anger ras eller etniskt ursprung för en person, politiska åsikter, religiösa eller filosofiska övertygelser eller fackföreningsmedlemskap, genetiska data, biometriska uppgifter eller uppgifter om hälsa eller uppgifter om en persons sexliv eller sexuella läggning. Om ni ger oss personlig information för en referens eller någon annan person som en del av er ansökan (till exempel en nödsituationskontakt eller information om anhöriga) är det ert ansvar att inhämta medgivande från den personen innan informationen lämnas till oss och att informera dem om innehållet i detta meddelande. 3. Om ni väljer att göra det kommer anställda från alla personal- och ansvariga avdelningar inom Avient-företagsgruppen att kunna komma åt er profil enligt detta meddelande och kontakta er.

Steel – Static 0.25 0.46 0.18 0.15 0.12 0.19 0.11 0.14 0.13 0.24 0.17 0.17 Impact Notched Izod Impact (23°C, 3.18 mm, Injection Molded) J/m ASTM D256A 41 64(6) 110 107 107 70 80 37 37 75 – 69 Thermal Properties Heat Deflection Temperature ASTM D648 0.45 MPa °C 215(6) – 250 215 216 184 152 151(6) 153(6) 218(6) – – 1.8 MPa °C 65(6) 239(7) 244(6) 210 210 75 94 81.1(6) 88 197(6) – 135(5) Electrical Properties Surface Resistivity ohms/sq ASTM D254 – – – 1.30x1012 1.9x1012 5.2x1012 – – – – – 1.0x109 Dielectric Strength (Short Time) kV/mm – – 8.5 – – – – – – – – – Flammability Flame Rating Class UL 94 HB – – HB HB HB – HB – – – – LubriOne™ Internally Lubricated Formulations NOTES (1) Type I, 5.1mm/min (2) Type I, 21.3 mm/min (3) Type I, 50 mm/min (4) Type I, 5.1mm/min, Break (5) 3.2 mm thick, Unannealed (6) 6.35 mm thick, Unannealed (7) 3.2 mm thick, Annealed PRODUCT DESCRIPTION UNITS TEST METHOD LB6000- 5024 RS HI Natural LB6000- 5021 RS S1 Black LB6000- 5021 RS X2 Black LB6000- 5019 X1 Black LB6700- 5001 RS AF Black NN- 000/01M Black SO REC LB6600- 5030 RS Grey LB3300- 5010 RS Natural LB3300- 5005 RS Natural REC LB3220- 5001 RS C Natural X1 LB8900- 5010 GP Grey LB8900- 5006 RS PE Natural LB8900- 5004 RS PE Natural LB4200- 5022 Black LB4200- 5023 Natural Base Polymer PA 6 PA6/PA66 PA66 PBT PC PKE POM Lubricant UHMWPE1 UHMWPE UHMWPE UHMWPE UHMWPE MoS22 Graphite UHMWPE UHMWPE UHMWPE Graphite UHMWPE UHMWPE MoS2 UHMWPE Filler type GF10 GF30 GF30 GF50 GF50 Unfilled GF33 GF20 MI20 GF10 Unfilled GF20 GF30 Unfilled Unfilled General Properties Specific Gravity g/cm3 ISO 1183 1.18 1.35 1.39 1.55 1.58 1.14 1.44 1.42 1.46 1.23 1.26 1.34 1.43 1.4 1.35 Mechanical Properties Tensile Modulus (23°C) MPa ISO 527-1 4250 9500 9000 15500 16600 3500 10600 6300 3330 4000 1630 5300 9250 2470 2150 Tensile Strength (Yield, 23°C) MPa ISO-527-2 97 150 160 205 200 85 164 102 55 60 60 108 99.1 55 50 Tensile Elongation (Break, 23°C) % ISO-527-2 12 2.5 3 2.7 2.4 3.4 2.0 4.2 8 2.5 46 3.7 1.5 11 11 Flexural Strength (23°C) MPa ISO 178 103 – – 285 265 108 215 127 78 85 38 155 117 73 68 Flexural Modulus (23°C) MPa ISO 178 3250 – – 12400 11100 2690 9000 4700 3000 3100 1380 4600 5450 2210 2070 Impact Charpy Notched Impact Strength (23°C, Injection Molded) kJ/m^2 ISO 179 14 12 10 15 10 3 6 7.7 4.3 12 15 10 7.6 8 5 Charpy Unnotched Impact Strength (23°C, Injection Molded) kJ/m^2 ISO 179 82 55 61 75 60 65 50 47 69 - NB 63 36 NB NB Thermal Properties Deflection Temperature Under Load 1.8 Mpa, Unannealed °C ISO 75-2/A 107 – – 204 – 73 235 – – – 90 210 204 86 80 Cofficient of Friction (CoF) & Wear Rate CoF vs. Steel - Static ASTM D1894 – 0.237 0.183 – – – – – – – – – – – – CoF (20min 0.2 m/s) g/min ASTM G77 – – – – – – – – – – – 0.79 0.79 – – Wear Rate (20h, 1m/s) g/min ASTM G77 – – – – – – – – – – – 1.02E-05 1.89E-05 – – Wear Rate (PV=2500) (in3-min/ ft-lb-hr) *10-10 ASTM D3702 – 125 175 – – – – – – – – – – – – Flammability Flame Rating UL 94 – – – – – – – HB HB V2 @ 3mm – – – – – LubriOne™ Internally Lubricated Formulations - PTFE-Free NOTES *ASTM D3702 (PV=2500, against 1018-steel) 1UHMWPE - ultra high molecular weight polyethylene 2MoS2 - molybdenum disulphide To learn more about LubriOne™ internally lubricated solutions, contact Avient at +1.844.4AVIENT (1.844.428.4368) www.avient.com EXPLORE WEAR RESISTANCE LubriOne internally lubricated thermoplastic polymers have been specifically designed to improve tribological performance in components, offering low coefficient of friction and improved wear–resistance properties.

AGILE MOBILITY REVOLUTIONIZING WHEELCHAIR MOBILITY WITH LIGHTWEIGHT COMPOSITE CASTER WHEELS © 2023, All Rights Reserved Avient Corporation, 33587 Walker Road, Avon Lake, Ohio USA 44012 Interested in learning more?

THERMALLY CONDUCTIVE THERMOPLASTICS REDUCE WEIGHT IN VEHICLE LIGHT HEAT SINKS THERMALLY CONDUCTIVE THERMOPLASTICS REDUCE WEIGHT AND DISSIPATE HEAT © 2023, All Rights Reserved Avient Corporation, 33587 Walker Road, Avon Lake, Ohio USA 44012 Interested in learning more about thermally conductive thermoplastics?

Public Contact: * Brian Greer Highest Ranking Employee Person responsible for Toxic Substance Reduction Plan preparation Darryl Chartrand Organization Validation Company and Parent Company Information Company Details Company Legal Name: * Polyone Canada Inc. Contacts Public Contact First Name: * Brian Last Name: * Greer Position: * EHS Manager Telephone: * 5192150535 Ext Fax Email: * brian.greer@polyone.com Person responsible for the Toxic Substance Reduction Plan preparation First Name: * Darryl Last Name: * Chartrand Position: * Senior Air Quality Technologist Telephone: * 4164999000 Ext 73642 Fax 4164994687 Email: * darryl.chartrand@ch2m.com Employees Employees Number of Full­time Employees: * 16 Copy of Certifications of Plan Copy of Certifications of Plan Upload Document A copy of the certification statement(s) from the Highest Ranking Employee and the Licensed Planner(s), for the Toxic Substance Reduction Plan for which the Plan Summary is being submitted are required.