High viscosity flow. High molded-in stress. High shear in the material.

High viscosity flow. High molded-in stress. High shear in the material.

Continuous fiber reinforced thermoset composites combine high molecular weight resins with glass or carbon fibers. These products can operate at high temperatures and have strong mechanical properties. The fibers will pull and eventually fracture but will withstand high loads due to the high tensile modulus of the reinforcement.

The dielectric constant (Dk) of the human body is high. Therefore, imaging devices need to be adaptive in high Dk. You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product.

Tube for optical fiber (stiff) PF 1043 2.1 15.0 190 40 Dca Good flame retardancy and high degree of stiffness. LV cable sheathing2 5995 8.0 11.5 155 40 Cca Class C if ECCOH used in combination with high LOI bedding. Optical Fiber Loose Tube PF 4142 3.0 34 35 42 High stiffness and high flame retardancy material for dry loose tubes.

Tube for optical fiber (stiff) PF 1043 2.1 15.0 190 40 Dca Good flame retardancy and high degree of stiffness. LV cable sheathing2 5995 8.0 11.5 155 40 Cca Class C if ECCOH used in combination with high LOI bedding. Optical Fiber Loose Tube PF 4142 3.0 34 35 42 High stiffness and high flame retardancy material for dry loose tubes.

Silcogum (High Consistency Silicone Rubber)

No. 0514.02) Revised 10/08/2019 Page 2 of 2 Test Description: Test Method or Standard: Thermal Analysis DSC (Differential Scanning Calorimetry) ASTM D3418, E794, E1356 TGA (Thermogravimetric Analysis) ASTM E1131 Karl Fischer Moisture Content ASTM D6869 Phthalate Determination by CPSIA CPSC-CH-C1001-09.3 1 The Consumer Product Safety Improvement Act (CPSIA) requires that every children's product subject to a federal consumer product safety requirement be tested by a Consumer Product Safety Commission (CPSC) accepted laboratory for compliance with the applicable federal children's product safety requirements.

No. 0514.02) Revised 09/21/2021 Page 2 of 2 Test Description: Test Method or Standard: Thermal Analysis DSC (Differential Scanning Calorimetry) ASTM D3418, E794, E1356 TGA (Thermogravimetric Analysis) ASTM E1131 Karl Fischer Moisture Content ASTM D6869 Phthalate Determination by CPSIA CPSC-CH-C1001-09.3, CPSC-CH-C1001-09.4 1 The Consumer Product Safety Improvement Act (CPSIA) requires that every children's product subject to a federal consumer product safety requirement be tested by a Consumer Product Safety Commission (CPSC) accepted laboratory for compliance with the applicable federal children's product safety requirements.

AVIATION COMPONENTS MANUFACTURER S E A T B E L T C O V E R • Paint-free, metallic look • Reduced Volatile Organic Compounds (VOCs) • Lightweight • Excellent mechanical performance • Non-conductive solution • Provided a non-conductive solution with reduced VOCs and coexisting color and metallic effects • Supplied a technology compatible with PPSU, PES, and PSU • Lowered density compared to virgin resin • Reduced the need for secondary processing and associated VOCs • Supplied low minimum order quantity of gold, silver and bronze colors Colorant Chromatics Metallic Effect Pre- colored Sulfone Colorants KEY REQUIREMENTS WHY AVIENT? AVIENT SOLUTION SUSTAINABILITY + AESTHETICS LEARN MORE Avient Corporation 1 https://www.avient.com/products/polymer-colorants/high-temperature-color-concentrates/colorant-chromatics-metallic-effect-pre-colored-sulfone-colorants Slide 1: Aviation COMPONENTs manufacturer