In the “Subtotal” section, you can enter values and select tax rates for shipping, handling, and miscellaneous costs. Applicable tax rates are determined by the tax code on the invoice. The tax rate is a government regulated rate to be paid to the tax authorities as part of the sale and is shown as a percentage.

Avient determined that the manufacturer required a material with a unique combination of properties, including: • Processing ease – high flow rate, ability to fill multi-cavity molds, thin-wall capabilities • Superior toughness – strength and durability to ensure dimensional integrity of the part • Repeatable performance – consistent conductivity for accurate measurement of liquids While several off-the-shelf compounds were evaluated, a new formulation was developed to meet the manufacturer’s specific needs as well as provide signifi cant benefi ts in reduced cycle time, increased production and reduced scrap rate. THE IMPACT For the manufacturer, Trilliant™ HC specialty engineered materials provided a number of advantages that contributed to the success of the new product line: • Reduced Cycle Time: The high flow properties of the Trilliant HC formulation allowed the manufacturer to produce warp-free parts that require less packing and cooling time, resulting in a 40% cycle time reduction. • Increased Production: Additionally, the high flow properties of the Trilliant HC formulation allowed for an increase in the number of cavities in the mold, resulting in a machine cost-per-part savings of over 30%. • Reduced Scrap Rate: The consistent conductivity, improved warp resistance, reduced flash, and improved durability provided by the Trilliant HC formulation meant less breakage, fewer rejects and a 40% reduction in scrap rate. • Total Manufacturing Cost Savings: Despite an increase I price per pound over the competition, the manufacturer’s total cash costs were reduced by over $45,000 on an annualized basis as a result of the proven, quantified savings in cycle time, productivity and scrap.

Color, Color and More Color Manufacturers of equipment and apparel agree—a crisp pop of bright color adds just the right amount of visual interest needed to grab attention. A New Generation of Enthusiasts The ranks of shootings sports aficionados have grown in recent years, due in part to the burgeoning interests of millennials and non-traditional enthusiasts.

RISK MANAGEMENT RECOMMENDATION Risk management measures for industrial site use include containment through engineering controls and personal protective equipment. If accidental exposure occurs, use of personal protective equipment such as an approved respirator, chemical resistant gloves, chemical goggles, and protective clothing should be utilized whenever appropriate.

These have been used successfully in personal care and consumer goods to enhance the look and feel of products and increase market appeal. It is the responsibility of the medical device manufacturer and the person placing the medical device on the market to ensure compliance of the medical device with all applicable laws and regulations, including the suitability of all raw materials and components used for its manufacture.

Handelsregister B des Amtsgerichts Mannheim Nummer der Firma: Seite 1 von 2 HRB 722265 Nummer der Eintragung a) Firma b) Sitz, Niederlassung, inländische Geschäftsanschrift, empfangsberechtigte Person, Zweigniederlassungen c) Gegenstand des Unternehmens Grund- oder Stammkapital a) Allgemeine Vertretungsregelung b) Vorstand, Leitungsorgan, geschäftsführende Direktoren, persönlich haftende Gesellschafter, Geschäftsführer, Vertretungsberechtigte und besondere Vertretungsbefugnis Prokura a) Rechtsform, Beginn, Satzung oder Gesellschaftsvertrag b) Sonstige Rechtsverhältnisse a) Tag der Eintragung b) Bemerkungen 1 2 3 4 5 6 7 1 a) PolyOne Color & Additives Germany GmbH b) Gaggenau Geschäftsanschrift: Adolf-Dambach-Straße 2-4, 76571 Gaggenau c) Die Herstellung und der Vertrieb von Farb- und Additiv Konzentraten im weitesten Sinn des Wortes unter dem warenzeichenrechtlich geschützten Namen Wilson Color sowie die Vornahme aller damit zusammenhängender Geschäfte und ähnlicher Geschäfte. 26.000,00 EUR a) Ist nur ein Geschäftsführer bestellt, vertritt er allein. Nicht mehr a) 18.11.2016 Melzer Abruf vom 08.11.2021 19:56 Handelsregister B des Amtsgerichts Mannheim Nummer der Firma: Seite 2 von 2 HRB 722265 Nummer der Eintragung a) Firma b) Sitz, Niederlassung, inländische Geschäftsanschrift, empfangsberechtigte Person, Zweigniederlassungen c) Gegenstand des Unternehmens Grund- oder Stammkapital a) Allgemeine Vertretungsregelung b) Vorstand, Leitungsorgan, geschäftsführende Direktoren, persönlich haftende Gesellschafter, Geschäftsführer, Vertretungsberechtigte und besondere Vertretungsbefugnis Prokura a) Rechtsform, Beginn, Satzung oder Gesellschaftsvertrag b) Sonstige Rechtsverhältnisse a) Tag der Eintragung b) Bemerkungen 1 2 3 4 5 6 7 Geschäftsführer: Katsers, Guy, Clervaux / Belgien, *26.06.1950 3 b) Vertretungsbefugnis geändert bei Geschäftsführer: Machin, Genevieve Elizabeth, Luxembourg / Luxemburg, *31.03.1972 mit der Befugnis, im Namen der Gesellschaft mit sich im eigenen Namen oder als Vertreter eines Dritten Rechtsgeschäfte abzuschließen. a) 01.02.2017 Melzer 4 b) Bestellt als Geschäftsführer: Potoczny, Zaneta Gabriela, Mersch / Luxemburg, *17.10.1974 mit der Befugnis, im Namen der Gesellschaft mit sich im eigenen Namen oder als Vertreter eines Dritten Rechtsgeschäfte abzuschließen.

These solutions provide a well-controlled laser transmission rate and weld width, excellent welding strength, and gas tight weld line without weld flash. The materials used for laser welding must allow a minimum 20% transmission rate for laser energy. The Bergamid Laser Welding product portfolio offers PA66 formulations that meet required transmission rates across various sectors.

Excelite OnePager Putty Knife PUTTY KNIFE MANUFACTURER N O R T H A M E R I C A • Reduce current scrap rate of 30% • Eliminate prominent sink marks • Minimize random short shots • Reduced scrap rate to 1% • Eliminated sink marks • Improved mold fill • Improvement in cell structure increased cell density and dimensional stability during critical cooling time Excelite™ IM Chemical Foaming Additives KEY REQUIREMENTS* WHY AVIENT? AVIENT SOLUTION SCRAP RATE + SINK MARK REDUCTION LEARN MORE*Note – all compared to previous CFA Copyright © 2020, Avient Corporation.

Once a specific resin has been identified for your needs, you can check in the table whether Avient has already masterbatches listed for the corresponding supplier and under which conditions of use (minimum thickness, exact rating and maximum let-down ratio). RENOL™ UL94 COMPLIANT MASTERBATCHES HOW TO USE THE TABLES UL HB GENERIC RESIN TYPE FLAME RATING MINIMUM THICKNESS (MM) MAXIMUM LET-DOWN RATIO Acetal Copolymer (POM) HB 1.50 1:20 Acrylonitrile Butadiene Styrene (ABS) HB 1.50 1:10 Ethylene Propylene Thermoplastic Rubber (EPTR) HB 1.50 1:20 High Impact Polystyrene (HIPS) HB 1.50 1:10 Liquid Crystal Polymer (LCP) HB 0.83 1:10 Polyamide (PA) HB 3.20 1:33 Polyamide (PA66 and PA 4/6) HB 0.81 1:20 Polyamide 6 (PA6) HB 0.75 1:25 Polyamide 66 (PA66) HB 0.40 1:40 Polybutylene Terephthalate (PBT) HB 0.81 1:20 Polybutylene Terephthalate/Polycarbonate (PBT/PC) HB 1.50 1:10 Polycarbonate (PC) HB 1.50 1:15 Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) HB 1.50 1:20 Polycarbonate/Polyethylene Terephthalate (PC/PET) HB 1.50 1:20 Polyethylene (PE) HB 1.50 1:50 Polyethylene Terephthalate (PET) HB 0.80 1:16.7 Polyketone HB 1.50 1:20 Polymethyl Methacrylate (PMMA) HB 3.00 1:25 Polypropylene (PP) HB 1.50 1:15 Polystyrene (PS) HB 0.83 1:15 Polyurethane (PUR) HB 1.50 1:25 Polyvinylchloride (PVC) HB 1.50 1:20 Styrene Acrylonitrile (SAN) HB 1.50 1:20 Thermoplastic Elastomer (TPE) HB 0.75 1:25 UL94 V-0, V-1, V-2 ASCEND GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polyamide 66 (PA66) 21X1(a)(f2), 21SPC1(a)(f2), 21SPF1(a)(f2), 21SPG1(a)(f2), 21SPM1(a)(f2), 20NSP1(a)(f2) 0.75 V-2 1:40 22HSP(e) 0.75 V-2 1:40 64C-R 3.0 V-2 1:50 ECO366(e) 0.4 V-0 1:40 ECO366H(e) 0.2 V-0 1:25 FR350J 0.4 V-0 1:25 20NSP(a)(f2), 21SPF(a)(f2), 21SPM(a)(f2), 21SPC(a)(f2) 0.4 V-2 1:40 20NSP(a)(h)(f2), 21SPF(a)(h)(f2), 21SPM(a)(h)(f2), 21SPC(a)(h) (f2) 1.5 V-2 1:20 Polyamide 66/6 (PA66/6) ECO315(e), ECO315J(e) 0.4 V-0 1:40 M344 3.0 V-0 1:25 909 0.75 V-0 1:25 UL94 V-0, V-1, V-2 BASF GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polyamide 6 (PA6) 8202(t1), 8202 Blend (t1) 0.71 V-2 1:25 8202C(t1), 8202C BLEND (t1) 1.50 V-2 1:25 8202CHS(t1) (t3), 8202C HS Blend 1.50 V-2 1:25 8202HS(t1) 1.50 V-2 1:25 B3S 0.80 V-2 1:25 1.50 V-2 1:25 B3S Q661 1.50 V-2 1:25 B3S R03 1.50 V-2 1:25 8232G HSFR(t9), B3U10G5 (t9) 1.50 V-0 1:25 Polyamide 6/66 (PA6/66) C3U (m) 0.40 V-0 1:25 KR4205(m), C3U (m), C3U (t)(m) 0.40 V-0 1:25 KR4205, C3U 0.40 V-0 1:25 Polyamide 66 (PA66) 1000(b), 1310-(b), Ultramid A3K Q603(+) 1.50 V-2 1:10 A3K (o) Q790(g)(f2) 0.41 V-2 1:20 A3K(f2), A3K Q601(f2) 0.41 V-2 1:20 A3SK 0.41 V-2 1:25 A5 3.00 V-2 1:33 A3W(f1), A3W FC (f1) 0.75 V-2 1:10 A3K R01 (t)(g)(f2) 0.40 V-2 1:20 Polybutylene Terephthalate (PBT) B4406 G2 (o) Q798 1.50 V-0 1:20 B4406 G2(a), B4406 G2 (o) Q717(a) 1.50 V-0 1:20 B4406 G3 (o) Q798 1.50 V-0 1:20 B4406 G3(a), B4406 G3 (o) Q717(a) 1.50 V-0 1:20 B4406 G4 (o) Q798 1.50 V-0 1:20 B4406 G4(a2), B4406 G4 (o) Q717(a2) 1.50 V-0 1:20 B4406 G6 (o) Q798 3.00 V-0 1:12.5 B4406 G6(%) 1.50 V-0 1:20 B4406 G6(a1), B4406 G6 (o) Q717(a1), B4406 G6 (o) Q717 High Speed(a1) 1.50 V-0 1:20 B4406(a), B4406 (o) Q717(a) 1.50 V-0 1:20 B4406@ 1.50 V-0 1:20 B4450 G5, B4450 G5 (t) 0.40 V-2 1:50 Polyurethane (PUR) 11 85 A(a) FHF 000 (f2) 0.75 V-0 1:33 UL94 V-0, V-1, V-2 CELANESE GENERIC RESIN TYPE MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Liquid Crystal Polymer (LCP) A130(+), MT1310 1.50 V-0 1:40 Polyamide 66 (PA66) A3 GF 25 V0XI, A G5 FR C4 0.40 V-0 1:25 Polybutylene Terephthalate (PBT) 2012-2 1.50 V-0 1:20 2016(b) 1.50 V-0 1:20 3112-2 1.50 V-0 1:20 3116(b) 1.50 V-0 1:20 3216(b) 1.50 V-0 1:20 3310-2(f2) 1.50 V-0 1:20 3311-3(f2) 1.50 V-0 1:20 3316(b) 1.50 V-0 1:20 3316(b), 3316HF 1.50 V-0 1:20 COVESTRO GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polycarbonate (PC) 2407 + (z)(f1) 0.75-2.60 V-2 1:10 2807 + MAS183 0.75 V-2 1:25 6455 + (z) 3.00 V-0 1:25 1.50 V-2 1:25 6485 + (z)(f1) 1.50 V-0 1:25 Polycarbonate/ Acrylonitrile Butadiene Styrene (PC/ABS) FR110 + 1.50 V-0 1:33 FR3005 HF + (z), FR3005 HF + BBS314 1.50 V-0 1:12.5 FR3010 + (z) 3.00 V-0 1:25 1.50 V-0 1:25 FR3010 HF + 3.00 V-0 1:25 FR3030 + 3.00 V-0 1:25 UL94 V-0, V-1, V-2 DSM GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polyamide 46 (PA46) TE250F6(h1)(j) 0.50 V-0 1:25 Polyamide 6 (PA6) F223-D(f1), F223-D /A(f1) 0.75 V-2 1:25 K222-KGV5(f1) 0.75 V-2 1:16.7 1.50 V-2 1:16.7 K-FKGS6/B(f1)(y) 0.80 V-0 1:25 Polyamide 66 (PA66) SG-KGS6/HV 0.75 V-0 1:25 Thermoplastic Elastomer (TPE) PL460-S 1.60 V-0 1:25 Polyamide 4T (PA4T) T11 (h) 0.40 V-0 1:20 DOMO GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polyamide (PA) J 60X1 V30 0.40 V-0 1:25 Polyamide 6 (PA6) PSB 286 0.80 V-2 1:25 3.00 V-2 1:25 Polyamide 66 (PA66) A 205F(r4) 0.38 V-2 1:25 A 225F 0.75 V-2 1:25 A 50H1 (r3)(f2) 0.40 V-0 1:25 A 30G1 0.40 V-0 1:25 DUPONT UL94 V-0, V-1, V-2 GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polyamide (PA) 132F(+)(f1), 135F(+)(f1) 0.75 V-2 1:20 HTNFR42G30NH 0.40 V-0 1:25 Polyamide 6/12 (PA6/12) 151, 151L 1.50 V-2 1:25 Polyamide 66 (PA66) 101(r9)(f1), 101F(r9)(f1), 101L(r9)(f1), E101(r9)(f1), E101L(r9)(f1) 0.75 V-2 1:20 103FHS(+), 103HSL(+), RN5077E(+), E103HSL(+) 0.75 V-2 1:20 A428 0.75 V-0 1:20 FE3757(+) 0.75 V-2 1:25 FR15(+) 0.75 V-0 1:20 FR50(+)(f1) 0.35 V-0 1:20 FR7025V0F(+) 0.50 V-0 1:33 Polyamide 66/6 (PA66/6) FR72G25V0 0.80 V-0 1:25 Polyamide 66/6T (PA66/6T) FR95G25V0NH 0.40 V-0 1:25 Polyamide 6T/66 (PA6T/66) HTNFR52G15AL 0.75 V-0 1:33 HTNFR52G30BL(r3) 0.75 V-0 1:33 HTNFR52G30L(+), FE15502(+), HTNFR52G30AL(+) 0.75 V-0 1:33 HTNFR52G30NH(r6) 0.40 V-0 1:25 0.75 V-0 1:10 HTNFR52G35BL 0.75 V-0 1:25 HTNFR52G35L(+), HTNFR52G35AL 0.75 V-0 1:33 Polyamide 6T/ MPMDT HTNFR51G35L(+) 0.81 V-0 1:33 Polybutylene Terephthalate (PBT) LW9030FR 1.50 V-0 1:25 S650FR 1.50 V-0 1:25 SK642FR 1.50 V-0 1:25 SK652FR1 1.50 V-0 1:16.5 T841FR (r4) 1.50 V-0 1:25 Polyethylene Terephthalate (PET) FR530(l)(+)(f1), FR530L(l)(+)(f1) 0.75 V-0 1:25 Thermoplastic Elastomer (TPE) HTR8068 1.60 V-0 1:25 UL94 V-0, V-1, V-2 EXXONMOBIL GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Ethylene Propylene Thermoplastic Rubber (EPTR) 251-80W232(f7) 1.50 V-2 1:20 251-92W232 1.50 V-0 1:20 251-70W232 1.50 V-0 1:10 1.00 V-2 1:10 LANXESS GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polyamide 6 (PA6) B30S+(f1) 1.50 V-2 1:25 B31SK+ 1.50 V-2 1:25 Polybutylene Terephthalate (PBT) B4235+ 1.50 V-0 1:10 TP364-302+, BF4232+(f1) 0.75 V-0 1:25 UL94 V-0, V-1, V-2 SABIC GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polybutylene Terephthalate (PBT) 310(w) 1.50 V-0 1:20 310SE0(w) 1.50 V-0 1:20 310SE0(w),310SE0R(w) 1.50 V-0 1:20 420SE0(f1)(w)(GG)(rr1) 1.50 V-0 1:20 420SE0(f1)(w)(GG)(rr2) 1.50 V-0 1:20 457(w) 1.50 V-0 1:20 457(w), 451(w) 1.50 V-0 1:20 553(a)(f1)(w) 1.50 V-0 1:20 553(a)(f1)(w), 553E(a)(f1)(w), 553U(a)(f1)(w) 1.50 V-0 1:20 553(w)(f1), 553M(w)(f1) 1.50 V-0 1:20 DR48(w) 1.50 V-0 1:20 DR48,DR48M 1.50 V-0 1:20 V4760(a2) 0.40 V-0 1:20 EXVX1259, ENH4550 0.40 V-0 1:20 771 0.75 V-0 1:25 Polybutylene Terephthalate/ Polycarbonate (PBT/PC) 357(f1)(w)(IC), 357M(f1)(w)(IC), 357U(f1)(w)(IC) 1.50 V-0 1:20 357(f1)(w)(IC), 357U(f1)(w)(IC) 1.50 V-0 1:20 357X(f1) 1.50 V-0 1:20 V3900WX(GG)(f1)(IA), V3901WX(GG)(f1)(IA) 3.00 V-0 1:20 1.50 V-0 1:20 357(w)(f2)(IC), 357M(w)(f2)(IC), 357U(w)(f2)(IC) 1.50 V-0 1:20 UL94 V-0, V-1, V-2 SABIC GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polycarbonate (PC) 221(f2) 1.50 V-2 1:25 221R(f2) 1.50 V-2 1:25 500(f2), 500R(f2) 3.00 V-0 1:33 503(f1) 3.00 V-0 10:1 1.50 V-0 10:1 503(f1), 503R(f1) 3.00 V-0 10:1 1.50 V-0 10:1 943(ab) 1.50 V-0 1:20 943(f1) 1.50 V-0 1:20 943(f1), 923(f1) 1.50 V-0 1:20 950A, 920ASR, FXD911A(GG), 940ASR 1.50 V-2 1:25 CFR7630(f1)(gg*) 1.50 V-0 1:25 ML5139R(f2) 3.00 V-0 1:33 950A, FXD911A(GG), 940ASR 3.00 V-0 1:25 943 1.50 V-0 1:20 920A 3.00 V-0 1:25 1.50 V-2 1:25 Polycarbonate/ Acrylonitrile Butadiene Styrene (PC/ABS) C2950 1.50 V-0 6:100 C6200(GG) 2.00 V-0 1:20 Acrylonitrile Styrene Acrylate/ Polycarbonate (ASA/PC) HRA222 (GG) 0.80 V-2 1:20 UL94 V-0, V-1, V-2 SOLVAY OTHERS GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polyphenyl Sulfone (PPSU) R-5100 (r1)(##), R-5000 (r1)(##) 1.50 V-0 1:10 Polyphthalamide (PPA) AFA-4133 V0(+) (*) 0.75 V-0 1:25 BASE RESIN MANUFACTURER GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO ALBIS Polypropylene (PP) PP 13 CV2 14 1.50 V-2 1:25 AVIENT Polyvinylchloride (PVC) M3700(X), M3755(X) 1.50 V-0 1:25 M3900 1.50 V-0 1:25 CHI MEI Acrylonitrile Butadiene Styrene (ABS) PA-765(+) 1.50 V-0 1:10 Polycarbonate/ Acrylonitrile Butadiene Styrene (PC/ABS) PC-510(+) 1.50 V-0 1:25 EMS-CHEMIE Polyamide 6 (PA6) Grilon A 26 V0 0.75 V-0 1:25 FORMOSA Polycarbonate (PC) #1700+(f2) 0.36-0.42 V-2 1:50 GEON Polyvinylchloride (PVC) 85891(f1) 1.70 V-0 1:20 85891(f2) 1.70 V-0 1:20 M3700(X) 1.50 V-0 1:25 M3900 1.50 V-0 1:10 1:25 INEOS Polystyrene (PS) 855 HV 3.00 V-1 100:4 INVISTA Polyamide 66 (PA66) FRU4800 XHL (r1) 0.40 V-0 1:25 U4820L (r1) 0.40 V-2 1:25 UL94 V-0, V-1, V-2 OTHERS BASE RESIN MANUFACTURER GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO KINGFA Polyamide 66 (PA66) PA66-R11G25 (##) 0.25 V-0 1:25 KURARAY Polyamide 9T (PA9T) GP2300S 0.40 V-0 1:25 LG CHEM Polycarbonate/ Acrylonitrile Butadiene Styrene (PC/ABS) LUPOY GP-5106-F 3.00 V-0 1:20 LOTTE CHEMICAL Acrylonitrile Butadiene Styrene (ABS) VH-0800(+) 1.50 V-0 1:25 Polycarbonate (PC) HN-1064(+) 0.75 V-2 1:10 1.50 V-0 1:10 1.20 V-1 1:10 Polystyrene (PS) VH-1800+ 3.00 V-0 1:25 1.50 V-0 1:25 MITSUBISHI Polycarbonate (PC) S-2000+(f1) 1.50-1.80 V-2 1:10 POLYMER PRODUCTS Polystyrene (PS) ZYNTAR 351 2.00 V-0 1:20 1.50 V-0 1:20 ZYNTAR 7000 2.00 V-0 1:25 ZYNTAR 702 2.00 V-0 1:25 8020 2.00 V-0 1:20 8120 2.00 V-0 1:20 8130 1.50 V-0 1:20 POLYMER RESOURCES Polycarbonate (PC) PC-FR1A-D, PC- FR2A-D, PC-FR3A-D 3.00 V-0 1:33 1.50 V-2 1:33 SUMITOMO Liquid Crystal Polymer (LCP) E6007LHF(ra) 0.30 V-0 1:25 E6007LHF-MR(gt) 0.20 V-0 1:12.5 UL94 V-0, V-1, V-2 OTHERS BASE RESIN MANUFACTURER GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO TORAY Polyamide 6 (PA6) 1017 1.60 V-2 1:16.5 Polyamide 66 (PA66) 3004-V0(rr), CM3004-V0(rr) 0.40 V-0 1:25 TRINSEO Polycarbonate (PC) 891(w) 1.10 V-0 1:25 WELLMAN Polyamide 66/6 (PA66/6) 220-N, 21L-N, 22L-N 1.50 V-2 1:25 WESTLAKE Polyvinylchloride (PVC) 6597(f1), HF-6597(f1) 1.50 V-0 1:25 SP-7107 (f1)(a) 3.00 V-0 1:25 5VA AND 5VB BASE RESIN MANUFACTURER GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING COLORS MAXIMUM LET-DOWN RATIO AVIENT Polyvinylchloride (PVC) M3900 1.50 5VB ALL 1:25 WHITE 1:10 COVESTRO Polycarbonate/ Acrylonitrile Butadiene Styrene (PC/ABS) FR3010 + (z) 3.00 5VA ALL 1:25 DUPONT Polyamide 66/6T (PA66/6T) FR95G25V0NH 1.50 5VA ALL 1:25 Polybutylene Terephthalate (PBT) LW9030FR 2.00 5VA BLACK 1:25 3.00 5VA ALL 1:25 SK642FR 1.50 5VA BLACK 1:25 GEON Polyvinylchloride (PVC) M3900 1.50 5VB ALL 1:25 WHITE 1:10 SABIC Polybutylene Terephthalate/ Polycarbonate (PBT/PC) V3900WX(GG)(f1)(IA), V3901WX(GG)(f1)(IA) 3.00 5VA ALL 1:20 1.844.4AVIENT www.avient.com Copyright © 2020, Avient Corporation.

Once a specific resin has been identified for your needs, you can check in the table whether Avient has already concentrates listed for the corresponding supplier and under which conditions of use (minimum thickness, exact rating and maximum let-down ratio). ONCOLOR™ UL 94 COLORANTS HOW TO USE THE TABLES UL HB GENERIC RESIN TYPE FLAME RATING MINIMUM THICKNESS (MM) MAXIMUM LET-DOWN RATIO Acetal Copolymer (POM) HB 1.50 1:20 Acrylonitrile Butadiene Styrene (ABS) HB 1.50 1:10 Ethylene Propylene Thermoplastic Rubber (EPTR) HB 1.50 1:20 High Impact Polystyrene (HIPS) HB 1.50 1:10 Liquid Crystal Polymer (LCP) HB 0.83 1:10 Polyamide (PA) HB 3.20 1:33 Polyamide (PA66 and PA 4/6) HB 0.81 1:20 Polyamide 6 (PA6) HB 0.75 1:25 Polyamide 66 (PA66) HB 0.40 1:40 Polybutylene Terephthalate (PBT) HB 0.81 1:20 Polybutylene Terephthalate/Polycarbonate (PBT/PC) HB 1.50 1:10 Polycarbonate (PC) HB 1.50 1:15 Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) HB 1.50 1:20 Polycarbonate/Polyethylene Terephthalate (PC/PET) HB 1.50 1:20 Polyethylene (PE) HB 1.50 1:50 Polyethylene Terephthalate (PET) HB 0.80 1:16.7 Polyketone HB 1.50 1:20 Polymethyl Methacrylate (PMMA) HB 3.00 1:25 Polypropylene (PP) HB 1.50 1:15 Polystyrene (PS) HB 0.83 1:15 Polyurethane (PUR) HB 1.50 1:25 Polyvinylchloride (PVC) HB 1.50 1:20 Styrene Acrylonitrile (SAN) HB 1.50 1:20 Thermoplastic Elastomer (TPE) HB 0.75 1:25 UL 94 V-0, V-1, V-2 ASCEND GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polyamide 66 (PA66) 21X1(a)(f2), 21SPC1(a)(f2), 21SPF1(a)(f2), 21SPG1(a)(f2), 21SPM1(a)(f2), 20NSP1(a)(f2) 0.75 V-2 1:40 22HSP(e) 0.75 V-2 1:40 64C-R 3.0 V-2 1:50 ECO366(e) 0.4 V-0 1:40 ECO366H(e) 0.2 V-0 1:25 FR350J 0.4 V-0 1:25 20NSP(a)(f2), 21SPF(a)(f2), 21SPM(a)(f2), 21SPC(a)(f2) 0.4 V-2 1:40 20NSP(a)(h)(f2), 21SPF(a)(h)(f2), 21SPM(a)(h)(f2), 21SPC(a)(h) (f2) 1.5 V-2 1:20 Polyamide 66/6 (PA66/6) ECO315(e), ECO315J(e) 0.4 V-0 1:40 M344 3.0 V-0 1:25 909 0.75 V-0 1:25 UL 94 V-0, V-1, V-2 BASF GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polyamide 6 (PA6) 8202(t1), 8202 Blend (t1) 0.71 V-2 1:25 8202C(t1), 8202C BLEND (t1) 1.50 V-2 1:25 8202CHS(t1) (t3), 8202C HS Blend 1.50 V-2 1:25 8202HS(t1) 1.50 V-2 1:25 B3S 0.80 V-2 1:25 1.50 V-2 1:25 B3S Q661 1.50 V-2 1:25 B3S R03 1.50 V-2 1:25 8232G HSFR(t9), B3U10G5 (t9) 1.50 V-0 1:25 Polyamide 6/66 (PA6/66) C3U (m) 0.40 V-0 1:25 KR4205(m), C3U (m), C3U (t)(m) 0.40 V-0 1:25 KR4205, C3U 0.40 V-0 1:25 Polyamide 66 (PA66) 1000(b), 1310-(b), Ultramid A3K Q603(+) 1.50 V-2 1:10 A3K (o) Q790(g)(f2) 0.41 V-2 1:20 A3K(f2), A3K Q601(f2) 0.41 V-2 1:20 A3SK 0.41 V-2 1:25 A5 3.00 V-2 1:33 A3W(f1), A3W FC (f1) 0.75 V-2 1:10 A3K R01 (t)(g)(f2) 0.40 V-2 1:20 Polybutylene Terephthalate (PBT) B4406 G2 (o) Q798 1.50 V-0 1:20 B4406 G2(a), B4406 G2 (o) Q717(a) 1.50 V-0 1:20 B4406 G3 (o) Q798 1.50 V-0 1:20 B4406 G3(a), B4406 G3 (o) Q717(a) 1.50 V-0 1:20 B4406 G4 (o) Q798 1.50 V-0 1:20 B4406 G4(a2), B4406 G4 (o) Q717(a2) 1.50 V-0 1:20 B4406 G6 (o) Q798 3.00 V-0 1:12.5 B4406 G6(%) 1.50 V-0 1:20 B4406 G6(a1), B4406 G6 (o) Q717(a1), B4406 G6 (o) Q717 High Speed(a1) 1.50 V-0 1:20 B4406(a), B4406 (o) Q717(a) 1.50 V-0 1:20 B4406@ 1.50 V-0 1:20 B4450 G5, B4450 G5 (t) 0.40 V-2 1:50 Polyurethane (PUR) 11 85 A(a) FHF 000 (f2) 0.75 V-0 1:33 UL 94 V-0, V-1, V-2 CELANESE GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Liquid Crystal Polymer (LCP) A130(+), MT1310 1.50 V-0 1:40 Polyamide (PA) 132F(+)(f1), 135F(+)(f1) 0.75 V-2 1:20 HTNFR42G30NH 0.40 V-0 1:25 Polyamide 6/12 (PA6/12) 151, 151L 1.50 V-2 1:25 Polyamide 66 (PA66) A3 GF 25 V0XI 0.40 V-0 1:25 101(r9)(f1), 101F(r9)(f1), 101L(r9)(f1) 0.75 V-2 1:20 103FHS(+), 103HSL(+) 0.75 V-2 1:20 FR50(+)(f1) 0.35 V-0 1:20 FR7025V0F(+) 0.50 V-0 1:33 Polyamide 66/6 (PA66/6) FR72G25V0 0.80 V-0 1:25 Polyamide 66/6T (PA66/6T) FR95G25V0NH 0.40 V-0 1:25 HTNFR52G30BL(r3) 0.75 V-0 1:33 HTNFR52G30L(+), HTNFR52G30(+) 0.75 V-0 1:33 HTNFR52G30NH(r6) 0.40 V-0 1:25 0.75 V-0 1:10 HTNFR52G35BL 0.75 V-0 1:25 HTNFR52G35(+), HTNFR52G35 0.75 V-0 1:33 Polyamide 6T/ MPMDT HTNFR51G35L(+) 0.81 V-0 1:33 Polybutylene Terephthalate (PBT) 2016(b) 1.50 V-0 1:20 3116(b) 1.50 V-0 1:20 3216(b) 1.50 V-0 1:20 3316(b) 1.50 V-0 1:20 3316HF 1.50 V-0 1:20 LW9030FR 1.50 V-0 1:25 T841FR (r4) 1.50 V-0 1:25 Polyethylene Terephthalate (PET) FR530(l)(+)(f1), FR530L(l)(+)(f1) 0.75 V-0 1:25 Thermoplastic Elastomer (TPE) HTR8068 1.60 V-0 1:25 UL 94 V-0, V-1, V-2 DOMO GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polyamide (PA) J 60X1 V30 0.40 V-0 1:25 Polyamide 6 (PA6) PSB 286 0.80 V-2 1:25 3.00 V-2 1:25 S 60X1 V30 0.75 V-0 1.25 Polyamide 66 (PA66) A 205F(r4) 0.38 V-2 1:25 A 225F 0.75 V-2 1:25 A 50H1 (r3)(f2) 0.40 V-0 1:25 A 30G1 0.40 V-0 1:25 COVESTRO GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polycarbonate (PC) 2407 + (z)(f1) 0.75-2.60 V-2 1:10 2807 + MAS183 0.75 V-2 1:25 6455 + (z) 3.00 V-0 1:25 1.50 V-2 1:25 6485 + (z)(f1) 1.50 V-0 1:25 Polycarbonate/ Acrylonitrile Butadiene Styrene (PC/ABS) FR110 + 1.50 V-0 1:33 FR3005 HF + (z), FR3005 HF + BBS314 1.50 V-0 1:12.5 FR3010 + (z) 3.00 V-0 1:25 1.50 V-0 1:25 FR3010 HF + 3.00 V-0 1:25 FR3030 + 3.00 V-0 1:25 UL 94 V-0, V-1, V-2 ENVALIOR GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polyamide 46 (PA46) TE250F6(h1)(j) 0.50 V-0 1:25 Polyamide 6 (PA6) F223-D(f1), F223-D /A(f1) 0.75 V-2 1:25 K222-KGV5(f1) 0.75 V-2 1:16.7 1.50 V-2 1:16.7 K-FKGS6/B(f1)(y) 0.80 V-0 1:25 Polyamide 66 (PA66) SG-KGS6/HV 0.75 V-0 1:25 Thermoplastic Elastomer (TPE) PL460-S 1.60 V-0 1:25 Polyamide 4T (PA4T) T11 (h) 0.40 V-0 1:20 UL 94 V-0, V-1, V-2 EXXONMOBIL LANXESS GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Ethylene Propylene Thermoplastic Rubber (EPTR) 251-80W232(f7) 1.50 V-2 1:20 251-92W232 1.50 V-0 1:20 251-70W232 1.50 V-0 1:10 1.00 V-2 1:10 GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polyamide 6 (PA6) B30S+(f1) 1.50 V-2 1:25 B31SK+ 1.50 V-2 1:25 Polybutylene Terephthalate (PBT) B4235+ 1.50 V-0 1:10 TP364-302+, BF4232+(f1) 0.75 V-0 1:25 UL 94 V-0, V-1, V-2 SABIC GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polybutylene Terephthalate (PBT) 310(w) 1.50 V-0 1:20 310SE0(w) 1.50 V-0 1:20 310SE0(w),310SE0R(w) 1.50 V-0 1:20 420SE0(f1)(w)(GG)(rr1) 1.50 V-0 1:20 420SE0(f1)(w)(GG)(rr2) 1.50 V-0 1:20 457(w) 1.50 V-0 1:20 457(w), 451(w) 1.50 V-0 1:20 553(a)(f1)(w) 1.50 V-0 1:20 553(a)(f1)(w), 553E(a)(f1)(w), 553U(a)(f1)(w) 1.50 V-0 1:20 553(w)(f1), 553M(w)(f1) 1.50 V-0 1:20 DR48(w) 1.50 V-0 1:20 DR48,DR48M 1.50 V-0 1:20 V4760(a2) 0.40 V-0 1:20 EXVX1259, ENH4550 0.40 V-0 1:20 771 0.75 V-0 1:25 Polybutylene Terephthalate/ Polycarbonate (PBT/PC) 357(f1)(w)(IC), 357M(f1)(w)(IC), 357U(f1)(w)(IC) 1.50 V-0 1:20 357(f1)(w)(IC), 357U(f1)(w)(IC) 1.50 V-0 1:20 357X(f1) 1.50 V-0 1:20 V3900WX(GG)(f1)(IA), V3901WX(GG)(f1)(IA) 3.00 V-0 1:20 1.50 V-0 1:20 357(w)(f2)(IC), 357M(w)(f2)(IC), 357U(w)(f2)(IC) 1.50 V-0 1:20 UL 94 V-0, V-1, V-2 SABIC GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polycarbonate (PC) 221(f2) 1.50 V-2 1:25 221R(f2) 1.50 V-2 1:25 500(f2), 500R(f2) 3.00 V-0 1:33 503(f1) 3.00 V-0 10:1 1.50 V-0 10:1 503(f1), 503R(f1) 3.00 V-0 10:1 1.50 V-0 10:1 943(ab) 1.50 V-0 1:20 943(f1) 1.50 V-0 1:20 943(f1), 923(f1) 1.50 V-0 1:20 950A, 920ASR, FXD911A(GG), 940ASR 1.50 V-2 1:25 CFR7630(f1)(gg*) 1.50 V-0 1:25 ML5139R(f2) 3.00 V-0 1:33 950A, FXD911A(GG), 940ASR 3.00 V-0 1:25 943 1.50 V-0 1:20 920A 3.00 V-0 1:25 1.50 V-2 1:25 Polycarbonate/ Acrylonitrile Butadiene Styrene (PC/ABS) C2950 1.50 V-0 6:100 C6200(GG) 2.00 V-0 1:20 Acrylonitrile Styrene Acrylate/ Polycarbonate (ASA/PC) HRA222 (GG) 0.80 V-2 1:20 UL 94 V-0, V-1, V-2 SOLVAY (SYENSQO) OTHERS GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polyphenyl Sulfone (PPSU) R-5100 (r1)(##), R-5000 (r1)(##) 1.50 V-0 1:10 Polyphthalamide (PPA) AFA-4133 V0(+) (*) 0.75 V-0 1:25 BASE RESIN MANUFACTURER GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO ALBIS Polypropylene (PP) PP 13 CV2 14 1.50 V-2 1:25 AVIENT Polyvinylchloride (PVC) M3700(X), M3755(X) 1.50 V-0 1:25 M3900 1.50 V-0 1:25 CHI MEI Acrylonitrile Butadiene Styrene (ABS) PA-765(+) 1.50 V-0 1:10 Polycarbonate/ Acrylonitrile Butadiene Styrene (PC/ABS) PC-510(+) 1.50 V-0 1:25 EMS-CHEMIE Polyamide 6 (PA6) Grilon A 26 V0 0.75 V-0 1:25 FORMOSA Polycarbonate (PC) #1700+(f2) 0.36-0.42 V-2 1:50 GEON Polyvinylchloride (PVC) 85891(f1) 1.70 V-0 1:20 85891(f2) 1.70 V-0 1:20 M3700(X) 1.50 V-0 1:25 M3900 1.50 V-0 1:10 1:25 INEOS Polystyrene (PS) 855 HV 3.00 V-1 100:4 INVISTA Polyamide 66 (PA66) FRU4800 XHL (r1) 0.40 V-0 1:25 U4820L (r1) 0.40 V-2 1:25 UL 94 V-0, V-1, V-2 OTHERS BASE RESIN MANUFACTURER GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO KINGFA Polyamide 66 (PA66) PA66-R11G25 (##) 0.25 V-0 1:25 KURARAY Polyamide 9T (PA9T) GP2300S 0.40 V-0 1:25 LG CHEM Polycarbonate/ Acrylonitrile Butadiene Styrene (PC/ABS) LUPOY GP-5106-F 3.00 V-0 1:20 LOTTE CHEMICAL Acrylonitrile Butadiene Styrene (ABS) VH-0800(+) 1.50 V-0 1:25 Polycarbonate (PC) HN-1064(+) 0.75 V-2 1:10 1.50 V-0 1:10 1.20 V-1 1:10 Polystyrene (PS) VH-1800+ 3.00 V-0 1:25 1.50 V-0 1:25 MITSUBISHI Polycarbonate (PC) S-2000+(f1) 1.50-1.80 V-2 1:10 POLYMER PRODUCTS Polystyrene (PS) ZYNTAR 351 2.00 V-0 1:20 1.50 V-0 1:20 ZYNTAR 7000 2.00 V-0 1:25 ZYNTAR 702 2.00 V-0 1:25 8020 2.00 V-0 1:20 8120 2.00 V-0 1:20 8130 1.50 V-0 1:20 POLYMER RESOURCES Polycarbonate (PC) PC-FR1A-D, PC- FR2A-D, PC-FR3A-D 3.00 V-0 1:33 1.50 V-2 1:33 SUMITOMO Liquid Crystal Polymer (LCP) E6007LHF(ra) 0.30 V-0 1:25 E6007LHF-MR(gt) 0.20 V-0 1:12.5 UL 94 V-0, V-1, V-2 OTHERS BASE RESIN MANUFACTURER GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO TORAY Polyamide 6 (PA6) 1017 1.60 V-2 1:16.5 Polyamide 66 (PA66) 3004-V0(rr), CM3004-V0(rr) 0.40 V-0 1:25 TRINSEO Polycarbonate (PC) 891(w) 1.10 V-0 1:25 WELLMAN Polyamide 66/6 (PA66/6) 220-N, 21L-N, 22L-N 1.50 V-2 1:25 WESTLAKE Polyvinylchloride (PVC) 6597(f1), HF-6597(f1) 1.50 V-0 1:25 SP-7107 (f1)(a) 3.00 V-0 1:25 5VA AND 5VB BASE RESIN MANUFACTURER GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING COLORS MAXIMUM LET-DOWN RATIO AVIENT Polyvinylchloride (PVC) M3900 1.50 5VB ALL 1:25 WHITE 1:10 CELANESE Polyamide 66/6T (PA66/6T) FR95G25V0NH 1.50 5VA ALL 1:25 Polybutylene Terephthalate (PBT) LW9030FR 2.00 5VA BLACK 1:25 3.00 5VA ALL 1:25 SK642FR 1.50 5VA BLACK 1:25 COVESTRO Polycarbonate/ Acrylonitrile Butadiene Styrene (PC/ABS) FR3010 + (z) 3.00 5VA ALL 1:25 GEON Polyvinylchloride (PVC) M3900 1.50 5VB ALL 1:25 WHITE 1:10 SABIC Polybutylene Terephthalate/ Polycarbonate (PBT/PC) V3900WX(GG)(f1)(IA), V3901WX(GG)(f1)(IA) 3.00 5VA ALL 1:20 1.844.4AVIENT www.avient.com Copyright © 2024, Avient Corporation.