They can also be part of the chemical foaming process, achieving a material expansion of up to 50%. Up to 30% weight reduction can be achieved with Hydrocerol Chemical Foaming Agents in these applications.

The composition of the Board is intended to reflect an appropriate mix of skill sets, experience and qualifications that are relevant to PolyOne Corporation’s business and governance over time. Tax gross-ups are provided for imputed income for spouse/guest travel. Tax Gross-ups.

Drying non-halogenated materials is suggested. 2 hours @ 100 (38) Moisture Range (%) Not required Follow up by purging machine with general purpose PP • Residence time should not exceed 5 minutes for Maxxam FR products • General ventilation is suggested Shut Down • Purge the equipment with a general purpose PP • All tooling and equipment must be free of any residual Maxxam FR upon shut down • Continue generating parts made from the natural PP until clear • Wipe down tool steel with mold cleaner • When using a hot runner system, care must be taken to remove residual product from the manifold MOLD DESIGN RECOMMENDATIONS Cold Slug Wells • Place cold slug wells at the base of the sprue to capture the cold material first emerging from the nozzle • Place cold slug wells at every 90° bend in the runner system • Well depths approximately 2–3 times the diameter of the runner provide best results Draft Angle • Draft angle should be 1/2°–1° per side.

GLOBAL ISO 13485 MANUFACTURING FOOTPRINT Avient’s certified sites are located on three continents and offer manufacturing support, project transfer and back-up supply to reduce supply chain risk. ADDING VALUE TO A WIDE RANGE OF HEALTHCARE APPLICATIONS PROVIDING STANDARD AND CUSTOM COLORANTS & ADDITIVES STANDARD COLOR RANGES To speed up time to market, Avient offers a standard range of colorants using pre-tested raw materials suitable for a wide range of polymers including PE, PP, PEBA, PC, and others. These additive concentrates help reduce material use by up to 20% depending on part geometry and wall thickness and are specially formulated and risk-assessed for healthcare applications.

Injection Molding Parameters Base Resin PA6 PA6 IM/ST PA6 GF PA6 GMF PA66 IM/ST PA66 GF Barrel Temperatures °F (°C) Rear Zone 450–490 (232–254) 440–490 (226–254) 490–510 (254–265) 480–500 (249–260) 510–530 (265–276) 510–530 (265–276) Center Zone 460–500 (238–260) 450–500 (232–260) 500–520 (260–271) 490–510 (254–265) 510–530 (265–276) 520–540 (271–282) Front Zone 470–510 (243–265) 460–510 (237–265) 510–525 (265–273) 500–520 (260–271) 530–550 (276–288) 530–550 (276–288) Nozzle 480–520 (249–271) 470–510 (243–265) 515–530 (268–276) 510–525 (265–273) 530–560 (276–293) 540–560 (282–293) Melt Temperature °F (°C) 480–520 (249–271) 470–510 (243–265) 515–530 (268–276) 510–525 (265–273) 530–550 (276–288) 540–560 (282–293) Mold Temperature °F (°C) 120–180 (49–82) 120–180 (49–82) 120–200 (49–93) 120–200 (49–93) 140–220 (60–104) 140–220 (60–104) Pack and Hold Pressure 50–80% of Injection Pressure Injection Velocity 1.0–4.0 in/sec Back Pressure 25–100 psi Screw Speed 35–80 rpm Drying Parameters 4 hours @ 180°F (82°C) Moisture Allowable 0.1–0.2% Cushion 0.250 in Screw Compression Ratio 2.0:1–2.5:1 Nozzle Type Reverse Taper Clamp Pressure 3–5 tons/in2 Processing Guide 3 Start Up & Shut Down Recommendations Purge Compound Polypropylene Recycling Recycling prime grades up to 20% is permissible and recycling PIR or PCR grades up to 10% is permissible.

LOADING DOCK SHELTERS R E I N F O R C I N G S T A Y S Replacement for steel or composite stays to provide reliable seal from external environment: • Withstand repeated flex and twisting, pass rigorous proprietary flexural testing requirements • Maintain performance in extreme temperatures • Enabled repeated twisting and flexing without failure, up to 90˚ bends, due to exceptional mechanical properties • Customized finishing to meet specific shape and edge surface requirements • Improved supply reliability with product manufactured in Montrose, CO Gordon Composites™ Thermoset Composite Springs KEY REQUIREMENTS WHY AVIENT?

NEVER SUMMER S N O W B O A R D S • Lightweight reinforcement that combines both structure and flexibility • Corrosion and moisture resistant • Consistent, durable performance • Provided structural integrity with strong yet flexible composite materials • Prevented rot and corrosion in a waterproof core layer • Added fatigue and stress resistance for reliable performance and long product life • Simplified manufacturing with consolidated material, reducing VOCs and labor intensive composite lay-up assembly Gordon Composites™ thermoset laminates KEY REQUIREMENTS WHY AVIENT?

CABLE MANUFACTURER L O O S E T U B E T E L E C O M S C A B L E • Low shrinkage (< 1%) • Consistent flame retardancy • Suitable gel resistance • Cold behaviour at - 40°C • Reduce total cost ownership • Improved processing compared to existing LSFOH material, increasing speed up to 800 m/min • Provided consultancy on processing parameters and tooling • Reduced cable thickness to 0.1mm & reduced shrinkage • Enabled customer to enter into new applications and cable designs due to the versatility of the material ECCOH™ 6151 LSFOH Formulations KEY REQUIREMENTS WHY AVIENT?

MAJOR TIER 1 SUPPLIER C O N N E C T O R C O V E R • EMI-shielding performance at frequencies from 30 MHz up to 2 GHz • Excellent dimensional stability • Must meet robust mechanical property targets including tensile strength and elongation at break • Worked in close collaboration with the OEM from the start of the development process in order to fully understand their key requirements • Developed a customized material providing the required EMI-shielding performance which, removing the need for secondary metallization manufacturing processes, reduced cycle time Surround™ NN- 14 NICF SIP Black Formulation KEY REQUIREMENTS WHY AVIENT?

Trilliant XR - CT and MRI Scanners MEDICAL DEVICE MANUFACTURER M R I A N D C T S C A N N E R S • Uniform shielding with no “hot spots” • X-ray shielding up to 140 KeV • Meet European Union’s Restriction of Hazardous Substances (RoHS) future compliance requirements • Provided a lead alternative solution that delivered improved geometric flexibility for more uniform radiation shielding • Lowered shielding component costs 30-50% by eliminating machining and assembly steps Trilliant™ XR Lead Replacement Thermoplastics KEY REQUIREMENTS WHY AVIENT?