Photothermally active particles added to the fibers help transform the energy of invisible light rays into heat for enhanced comfort in cold temperatures. When exposed to a light source for 10 minutes, this new generation of heat-preservation additives can provide a temperature increase from 6°C to 12°C for PET and PA fibers based on different let-down-ratio and textile structure. KEY CHARACTERISTICS • Offers reheating property for synthetic fibers with specialty formulations • Provides a temperature increase of up to 12°C when exposed to a light source for 10 minutes • Good spinnability • Lower impact on the color APPLICATIONS Cesa Fiber Additives are intended for use in: • Clothing: hoodie, sweater, jacket, ski clothing, thermal underwear, etc. • Home textile: bedding, blankets, etc. • Technical fabrics for thermal insulation PRODUCT BULLETIN Copyright © 2023, Avient Corporation.

In addition, several blends of the above polymers such as PC/ABS, PC/PETG, PC/PBT and PPO/PS have great commercial importance for several applications. Optimal adhesion values are also obtained for overmolds onto PC (Lexan), ABS (Cycoloy), PC/ABS(Cycolac) and PC/PBT (Xenoy) as demonstrated in Figure 5. F H H O m C H H O *C H H n C* H H O *m C H H C H C H C H H C H H C H *z C C C N HH H * x y C H 3 O C H 3 O* O C *n 285-056 Peel adhesion 3.23 2.55 3.06 3.063.063.062.89 2.55 2.89 2.89 2.72 2.72 3.06 2.38 0.00 0.50 1.00 1.50 2.00 2.50 3.00 3.50 Lexan 141 Cycolac MG38 Cycoloy C2950 Xenoy 5220 Xenoy 1339 Injection speed: 25 mm/sec A vg . p ee l, N /m m Melt temp: 190°C Melt temp: 200°C Melt temp: 220°C Figure 5: GLS 285-056 adhesion values overmolded onto PC, ABS, PC/ABS and PC/PBT over a wide range of melt emperatures of the TPE. t 285-056 peel adhesion 2.893.06 2.89 2.38 2.55 2.55 2.89 2.55 2.89 3.063.06 2.89 2 3 25 50 75 Injection velocity, mm/sec A vg . p ee l, N /m m Lexan 141 Cycolac MG38 Cycoloy C2950 Xenoy 5220 Figure 6: GLS 285-056 adhesion values overmolded onto PC, ABS, PC/ABS and PC/PBT over a wide range of injection peeds. s 285-056 tensile properties: initial & aged after 1 week at 70°C. 2.35 1.60 2.77 2.30 1.66 2.77 0 0.5 1 1.5 2 2.5 3 Tensile Strength 100% Modulus 300% Modulus Pa sc al s Initial Final Figure 7: Physical property retention of GLS 285-056 after 1week at 70°C.

These include enhanced light resistance, high temperature resistance, ageing test resistance, low shrinkage, and many other performance criteria that can be required in the final application. UV Light Stabilizers Cesa™ Light Additives Long-term protection against weather degradation. RAL 3015 - Afnor A-870 BS/IEC 304 (Dark Grey) RAL 6024 - Afnor A-460 Afnor A-571 (Light Blue) RAL 4005 - Afnor A-730 RAL 7035 - BS/IEC 304 (Light Grey) RAL 2004 - BS/IEC 304 RAL 8002 - BS/IEC 304 RAL 6016 - Afnor A-445 RAL 6027 - BS/IEC 304 RAL 7032 RAL 1021 - BS/IEC 304 Afnor A-330 RAL 5015 - BS/IEC 304 RAL 7000 - Afnor A-625 RAL 2003 RAL 6018 - BS/IEC 304 RAL 9005 - BS/IEC 304 Afnor A-603 RAL 9010 - BS/IEC 304 Afnor A-665 RAL 8003 RAL 3000 - BS/IEC 304 Afnor A-805 The following colors are available in all ranges with short-term delivery.

SURGICAL INSTRUMENT OEM D E N T A L S C A L E R • Attain an extreme white color to appear hygienic and aesthetically pleasing • Ability to laser mark the brand • Maintain impact resistance • Achieved a clean, bright white color that provided a more pleasing experience for patients • Allowed scaler to be laser marked for brand identification • Met the need for impact resistance and successfully passed the drop test requirements Transcend™ Premier Healthcare Colorants KEY REQUIREMENTS WHY AVIENT?

Taggants can be used for different materials and different industries.  

Therefore, two TPE materials with different specific gravities will result in different part weights.

Can be used with many different resins and grades of rPET Sustainable Additives White Paper for Food and Beverage Packaging

AVIENT SOLUTION LEADING EV MANUFACTURER C H A R G I N G G U N G R I P • Good abrasion resistance • Excellent chemical resistance • Nice surface finish • Good bonding with flame retardant PC/ABS • Provided a rubbery touch feel, chemical resistance (including to ethanediol), and better appearance than the incumbent TPV solution • Eliminated a secondary process through two- shot injection molding with good adhesion to PC, ABS, PC/ABS, and copolyester handles • Offered quick technical support to accelerate the product development KEY REQUIREMENTS CHEMICAL RESISTANCE + BONDING LEARN MORE Versaflex™ TPE Formulation Copyright © 2023, Avient Corporation.

Homepage // News Center // Dyneema® Launches New Fiber for Protective Gloves, Initiating Paradigm Shift in Light-Weight, Comfort and Strength Surpassing cut protection and light-weight performance of prior-generation fiber, the new material enables gloves to be made using a single yarn technology – delivering built-in cut resistance without the need for reinforcement yarns.

UV OUTDOOR WHITE PC WHITE PETG PP LIGHT PURPLE 7439C