830K LIGHT CASHMERE 81011PC ECOLUTION EXTRA WHITE PC LIGHT BLUE LC 2

PC REGAL PURPLE 2597C PC/ABS PURE WHITE 000C CMPD 3275C GREEN LIGHT

PC (ISO) WHITE CC PC BRT. TPE LIGHT GREY

Every molding machine is different in actual performance. There are different guidelines to follow for each. Hot Melt Hot melt adhesives are 100% solids, and are used for light duty applications.

The coloration and processing of recycled polymers can be challenging due to the quality difference between batches of recycled materials and the potential loss of mechanical stability. It can be customized to fulfill specific properties and combined with color into a Smartbatch™ solution with exact color matching to the final article. • Cesa™ Flame Retardant Additives enable a fire performance in line with different levels of Glow Wire temperatures (IEC 60685-2-12) for various recycled resins including PP, PC, and PS.

WHITE SUGAR 2 PC TRITON BROWN PC TRITON GREY

Base Resin PC PC/PSU PES PEI PP ABS PEEK PA Barrel Temperatures* °F (°C) Rear Zone 530–560 (277–293) 550–575 (288–302) 660–700 (349–371) 675–725 (357–385) 390–420 (199–216) 425–460 (219–238) 680–730 (360–388) 430–500 (221–260) Center Zone 515–560 (269–288) 540–565 (282–296) 650–690 (343–366) 655–710 (352–377) 380–405 (193–207) 415–450 (213–232) 670–710 (354–377) 420–490 (216–254) Front Zone 510–525 (266–274) 530–555 (277–291) 640–680 (338–360) 655–700 (346–371) 370–395 (188–202) 405–440 (207–227) 650–690 (343–366) 410–480 (210–249) Nozzle 520–535 (271–280) 540–565 (282–296) 650–690 (343–366) 665–710 (352–377) 380–400 (193–204) 415–450 (213–232) 660–700 (349–371) 420–490 (216–254) Melt Temperature 525–560 (274–293) 530–580 (277–304) 650–700 (343–371) 660–730 (349–388) 375–395 (191–202) 410–460 (210–238) 650–730 (343–388) 420–500 (216–260) Mold Temperature 175–250 (80–121) 160–220 (71–104) 280–350 (138–177) 275–350 (135–177) 100–135 (38–57) 150–180 (66–82) 300–425 (149–219) 160–230 (71–110) Pack & Hold Pressure 50%–75% of Injection Pressure Injection Velocity in/s 0.5–2.0 Back Pressure psi 50 Screw Speed rpm 40–70 40–70 40–70 40–70 40–70 40–70 40–70 40–70** Drying Parameters °F (°C) 6 hrs @ 250 (121) 4 hrs @ 250 (121) 4 hrs @ 275 (135) 4 hrs @ 250 (121) 3 hrs @ 300 (150) 2 hrs @ 200 (93) 3 hrs @ 275 (135) 4 hrs @ 180 (82) Cushion in 0.125–0.250 Screw Compression Ratio 2.0:1–2.5:1 2.0:1–2.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 Nozzle Type General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose Reverse Taper Clamp Pressure 5–6 Tons/in2 * A reverse temperature profile is important to obtain optimum conductive properties. MOLD DESIGN RECOMMENDATIONS Gates • Many different types of gates can be used such as pin, fan, tunnel, tab and edge gates. Venting • Place vents at the end of fill and anywhere potential knit/weld lines will occur. • All vents need to be vented to atmosphere. • For circular parts, full perimeter venting is recommended. • Cut vent depths to: - PC Compounds: 0.001"–0.002" depth and 0.250" width - PC/PSU Compounds: 0.002"–0.003" depth and 0.250" width - PES Compounds: 0.003"–0.004" depth and 0.250" width - PEI Compounds: 0.001"–0.003" depth and 0.250" width - PP Compounds: 0.001"–0.002" depth and 0.250" width - ABS Compounds: 0.0015"–0.0025" depth and 0.250" width - PEEK Compounds: 0.002"–0.004" depth and 0.250" width - Nylon Compounds: 0.002" min. depth and 0.250" width • Increase vent depth to 0.040" (1.0mm) at 0.250" (4.0mm) away from the cavity and vent to atmosphere.

LEDs & Lighting Automotive Lighting Trucking Lighting

LIGHT BLUE 5 WHITE WHITE HPN-68

Can be overmolded to PP, PC, ABS and PC/ABS, injection moldable These 30% post-industrial recycled grades are suitable for PC, ABS and PC/ABS OM. These grades are formulated with 20-60% PIR content and are suitable for PC, ABS and PC/ABS OM.