Versaflex XP 2850 Hardness, Shore A 53 Specific Gravity 0.89 Color Natural Tensile Strength (psi) 616.4 Elongation at Break (%) 541.4 Viscosity @ 11170/sec (Pa s) 10.9 Dry Kinetic COF 1.256 Wet Kinetic COF 2.463 Increase in COF* (%) 96.1 Abrasion Loss** (mg/cycle) 0.014 Bondability*** PP, PE TECHNICAL PROPERTIES OF VERSAFLEX XP WET GRIP MATERIAL * Pull time = 5 sec; Sled Weight = 203 grams; Rate = 30cm/min ** Weight = 1000 grams; Cycles = 500; Wheel = H-18 *** For bonding to other substrates, please contact Avient COMPARING VERSAFLEX XP 2850 WITH COMMONLY USED WET GRIP MATERIALS 3.00 2.50 2.00 1.50 1.00 0.50 0.00 1.26 2.46 0.85 0.52 0.40 1.20 0.52 0.50 0.52 0.500.50 0.49 Wax Rubber EVA Foam Rubberized Vinyl Versaflex XP 2850 PVC DRY WET Wet/Dry COF Performance *Prepared to standard ASTM D1141-98R21 ps i D ur om et er (S ho re A )

POLYOLEFINS ALIGNING WITH SUSTAINABILITY GOALS POLYOLEFINS ARE EVERYWHERE Polyethylene (PE) and polypropylene (PP) are among the most popular plastics in the world.

FDA/EU compliance information available upon request REMAFIN™ EP White Colorants for Pharmaceutical Packaging REMAFIN™ EP is a range of PE and PP based masterbatches designed for protecting oral, topical, parenteral, ophthalmic and nasal pharmaceuticals by opacifying primary and secondarypharmaceutical packaging.

APPLICATIONS OnColor NIR Sortable Colorants can benefit the following stakeholders operating within the packaging industry: • Retailers • Brand Owners • Convertors • Recycling Facilities • Packaging Recovery Organizations GLOBAL APPROVALS • COTREP approved portfolio available • APR Meets Preferred Guidance for PE and PP resins Also sold as Cesa™ IR Black Additives For any additional information on our color and additive masterbatch portfolio for packaging and consumer applications, please contact your local Avient representative.

AB veya Birleİik Krallık'taysanız, Avient AB ve Birleİik Krallık dıİındaki tüm veri ithalatçılarının AB ve Birleİik Krallık'ta elde ettikleri tüm kiİisel bilgileri Avrupa Komisyonu tarafından onaylandıİı İekilde denetimciden denetimciye standart sözleİme hükümlerine ("Hükümler") uygun olarak iİlemek ve korumak için uymak zorunda oldukları İartlar kapsamında Grup İçi Uluslararası Veri Transferi Sözleİmesi imzalamıİtır.

Cesa Laser Marking Additives can be used with thermoplastics commonly used in vehicles including: • PP • PC/ABS • Polyamide • Polyacetal (POM) WHY SELECT LASER MARKING?

KEY CHARACTERISTICS • Available for polyethylene, polypropylene, ABS, polycarbonate and styrenics • Bio-content of resin carrier varies from 70% to 100% depending on polymer—calculated to ASTM D6866 standard • Manufactured at four ISO 13485 certified sites, providing global consistency and security of supply • Documented change control beyond CAS number, reducing risk of change • Drop-in solutions that can be processed like fossil-based grades on common injection molding and extrusion machines • Can be provided as ready-to-use pre-colored or additive formulation REGULATORY SUPPORT • Raw materials tested to: - ISO 10993-1 - USP and (incl. class VI) - European Pharmacopeia, monograph 3.1.3/ 3.1.5 (polyolefin packaging materials) - USP (polyethylene) - Elemental impurities as per ICH Q3D • Registered Drug Master File (Type III) and/or Device Master File • Food contact according to US FDA and APPLICATION BULLETIN Sustainability Spotlight Bio-polymers Healthcare use limitations apply—see below.

APPLICATION BULLETIN PRODUCT NAME SUITABLE FOR APPLICATION LDR Cesa™ Stat OCA0025695 PP Permanent reduction of dust attraction in interior From 5% Cesa™ Stat OCA0025609 PC/ABS, PA6, PC/ASA Permanent reduction of dust attraction in interior From 8% Cesa™ Stat OCA0025603 LDPE, TPE Permanent reduction of dust attraction in interior From 7% The graph shows the measurement of the charge decay time at 23°C/50% r.H. on 80x80x2mm IM plaques.

waterproof watches, and eyewear frames • Healthcare products – ISO and USP pre-tested solutions are sold as Mevopur™ Healthcare Functional Additives BENEFITS • Produces strong, durable, and consistent seams • Available for polyolefins, TPE, ABS, SAN, PA, PC, PMMA, and others on request • Delivered as concentrates or ready-to-use formulations • Can be combined with color into a single product • Specific regulatory compliance available on request, e.g., UL 94 recognition, EU and US food contact • Product guidance from our experts PRODUCT BULLETIN Copyright © 2023, Avient Corporation.

To meet the manufacturer’s goals for the mouse grip, a clear TPE overmolding material, GLS Versaflex™, was formulated for improved ergonomics and comfort, strong chemical resistance, and excellent bonding to the ABS substrate.