CESA™ Light additives can protect the resin in multiple ways. Many CESA Light products include CESA Nox additives, which also aids in polymer protection. 1.844.4AVIENT www.avient.com Copyright © 2022, Avient Corporation. CESA LIGHT – STANDARD OFFERINGS POLYMER FAMILY MATERIAL PRODUCT NAME PRODUCT TYPE DOSAGE Polyolefin PEA0820040 CESA Light PEA0820040 Stabilizer/Absorber 0.5–1.2% Polyolefin PRAN698456 CESA Light 7102 Stabilizer 1–4% HOPP PPA0820048 CESA Light PPA0820048 Stabilizer/Absorber 1–2% HOPP PPAN698522 CESA Light 7225 Stabilizer 1–4% Nylon ABA0820033 CESA Light ABA0820033 Stabilizer/Absorber 0.6–1.4% Nylon ABAN698415 CESA Light 1574 Stabilizer 1–2% Polyester FPA0687372 Hiformer™ Blocker (liquid) Absorber to 390 nm 0.05–0.10% Polyester NBA0820025 CESA Light NBA0820025 Absorber 0.5–2% Polycarbonate NCA0820016 CESA Light NCA0820016 Stabilizer/Absorber 0.75–3% Polycarbonate NCA0820017 CESA Light NCA0820017 Absorber 1–5% TPU RUA0820018 CESA Light RUA0820018 Absorber 2–4% TPU RUA0820030 CESA Light RUA0820030 Stabilizer/Absorber 2–4% Styrenic SLA0820013 CESA Light SLA0820013 Stabilizer/Absorber 1–3% Styrenic SLA0820012 CESA Light SLA0820012 Stabilizer 1.5–5% CESA Light additives can be used in combination with other CESA masterbatches, and formulations can be customized for most applications.

Cesa™ Aversive Technology for Wire & Cable Protection Masterbatch additives for long-term cable protection against rats and termites, compliant with the EU Biocidal Product Regulation (BPR) PRODUCT BULLETIN PRODUCT DESCRIPTION Cesa™ Aversive Technologies are masterbatches which, when incorporated into cable jackets, provide long-term protection against gnawing by rats and termites. According to the authorization, Cesa Aversive Technologies are sufficiently effective and have no harmful effects on human health and the environment. Cesa Aversive Technologies also support sustainability by contributing to cables with longer lasting protection.

All CESA Antimicro products are manufactured in an EPA-registered facility. CESA ANTIMICRO – STANDARD OFFERINGS CESA Antimicro additives can be used in combination with other CESA masterbatches, and formulations can be customized for most applications. POLYMER FAMILY MATERIAL PRODUCT NAME PRODUCT TYPE DOSAGE Polyolefin PEAN698413 CESA Antimicro SE 99-58 Silver 2–7.5% Polyolefin PEAN698432 CESA Antimicro J8146 Zinc 1–4% Polypropylene PPA0698636 CESA Antimicro J8259 Zinc 1–4% Nylon ABA0820032 CESA Antimicro ABA0820032 Silver 2–7.5% Polyester NBAN698441 CESA Antimicro S58441 Silver 2–7.5% Polycarbonate NCAN820009 CESA Antimicro NCAN820009 Silver 2–7.5% TPU RUA0698433 CESA Antimicro J8843 Zinc 1–4% Styrenic SLA0820011 CESA Antimicro SLA0820011 Zinc 1–4%

CESA Fiber Additives for Heat Preservation ProductBulletin_CN4.27-2 CESA™ 红外蓄热纤维添加剂 1.844.4AVIENT www.avient.com 版权所有©2021 埃万特公司。 CESA™ 红外蓄热纤维添加剂是一种配方添加剂， 满足GB/T 30127-2013标准，可用于增强合成纤 维纺织品的保暖性能。 相较于常规织物，使用此 CESA纤维添加剂织物在暴露阳光下能够吸收更多 的热量。

CESA™ Slip additives provide lubrication for a multitude of applications. CESA SLIP – STANDARD OFFERINGS CESA Slip additives can be used in combination with other CESA masterbatches, and formulations can be customized for most applications. POLYMER FAMILY MATERIAL PRODUCT NAME DOSAGE Polyolefin PEAN698411 CESA Slip SS-PE-nf 0.5–6.0% Polyolefin PEASAF CESA Slip 6103 0.5–2.0% Polypropylene PPA0820052 CESA Slip PPA0820052 0.25–1.0% Polyamide ABA0698523 CESA Slip 78523 0.5–1.5% Polyester NBA0698495 CESA Slip 58495 1.0–2.0% Polycarbonate NCA0698440 CESA Slip 98440 0.5–2.5% Styrenic SLA0820006 CESA Slip SLA0820026 1.0–5.0% TPU RUA0820027 CESA Slip RUA0820027 1.0–3.0%

Cesa Fiber Additives for Heat Preservation Technical Bulletin_TW2.28-1 Cesa™ 紅外蓄熱纖維添加劑 熱影像圖片 加熱前表面溫度：20.22°C 技術公告 埃萬特推出新一代應用於紡織纖維的紅外蓄熱添加 劑配方，旨在幫助品牌商能夠更加輕鬆地滿足消費 者對冬裝、運動裝和床上用品輕量舒適的要求。 與普通織物相比，在暴露於波長為320至1100nm 的日光下，使用Cesa™紅外蓄熱纖維添加劑的紡織 品能吸收更多熱量，同時能達到更高的克羅值（服 裝隔熱保暖性能）。 • • • 測試方法：FTTS-FA-010-2007 4.2 設備：紅外線熱像儀 熱源：500W鹵素燈 熱輻射距離：100 cm 加入Cesa紅外蓄熱纖維添加劑 加熱10分鐘後表面溫度：33.85°C 溫度變化：+13.6°C 測試方法 0.9 9°C 8.9°C 5.6°C 0.625 +12.9% +13.6% +1.7% www.avient.com 標準要求 測試結果 GB/T 30127 遠紅外線性能 GB/T 18319-2019 光蓄熱性能 FTTS-FA-010 紅外線性能及蓄熱升溫 GB/T 11048-2008 Method A 熱舒適性 熱阻性能 單位：CLO 人體生理實驗 遠紅外線發射率 ≥0.88 (5-14um) （測試溫度:34°C） 遠紅外線輻射溫升值 ≥1.4°C 最高允許溫升值 ≥6°C 平均溫升值 ≥4.4°C（20分鐘） 平均發射率 ≥ 0.8 (2-22um) （測試溫度: 25°C) 0.81 規定加熱ΔT ≥ 0.5°C （相對於標準） +5.34°C (ΔT) 裸體：0 內褲：0.04 T恤：0.09 厚毛衣：0.35 冬季大衣：0.7 上述所有資料均為參考值 血流量 血流速 血氧濃度（%SpO2） 請聯絡您的埃萬特業務代表以了解 您所在國家或地區是否有售。

CESA™ Block Additives Antiblocking PRODUCT SELECTION GUIDE Unmodified film and sheet can adhere, causing problems of separation. CESA Block can be used in thin gauge film applications. 1.844.4AVIENT www.avient.com Copyright © 2022, Avient Corporation. CESA BLOCK – STANDARD OFFERINGS POLYMER FAMILY MATERIAL PRODUCT NAME DOSAGE Polyolefin PEA0820045 CESA Block PEA0820045 1–5% Polypropylene PPA0820056 CESA Block PPA0820056 1–5% Polyamide ABA0820022 CESA Block ABA0820022 2–6% Polyester NBA0820024 CESA Block NBA0820024 1–5% Styrenic SLA0820010 CESA Block SLA0820010 1–5% TPU RUA0820028 CESA Block RUA0820028 1–5% CESA Block additives can be used in combination with other CESA masterbatches, and formulations can be customized for most applications.

Cesa™ Dry Additives Cesa™ CTR Additives Cesa™ Unify™ A4R

VALVE-GATED TOOLS IN INJECTION MOLDING GUIDELINES CESA CLEAN ADDITIVES ™ KEY FEATURES Cesa™ Clean Additives • Cesa Clean is a concentrated purge product, not a purge compound. • It can be processed through manifolds, valve-gated tools and small sub gates. • Cesa Clean is 100% recyclable with polyolefin resins and compounds. GUIDELINES FOR USING CESA CLEAN ADDITIVES • Cesa Clean works best when molded maintaining normal (injection) pressure/shear • For best results, Avient recommends a “Running Color Change” which eliminates breaks in the molding cycle • Since the Cesa Clean concentrate will expand, it is recommended to reduce the shot size by 20% • It is designed for use at a let-down ratio (LDR) of 3.0% or (33:1); however, use rate can vary depending on the severity of the contamination but typically is 2.0–4.0% (a use rate higher than 6.0% may not have any positive affect on the cleaning performance) • Using Cesa Clean as a routine part of your color change rotation will allow faster changes and consume a minimal amount of raw material - Note: If the manifold is not cleaned routinely, this process may be more time consuming and additional material will be required • It is best to process at your normal polymer processing temperatures - For best performance, stock temperature should be at least 400°F - If 400°F is achieved during the purging process, no additional activation will occur during the reprocessing of regrind - All parts produced during the “Running Purge Cycle” should be captured as regrind, resulting in a scrap-free color change - If using sequential gates, open and close all gates at the same time while purging the tool - If contamination appears to be coming from one gate, open and close first, and for an extended period of time, to force more material through this location - When cleaning in this manner, pay close attention to shot size - Parts containing the previous or new color plus any Cesa Clean can be used as regrind INTRODUCING CESA CLEAN TO YOUR PROCESS Hand Blend • Hand weigh enough of the Cesa Clean and natural resin mix to equate to 3–5 times the barrel capacity • Use rate should be 3.0% or 33:1 for routine cleaning • For difficult-to-clean tooling, or tooling which is not routinely cleaned, start at 4.0% or 25:1 • Note: Do not attempt to vacuum load more than 15 feet from source as stratification/separation may occur Volumetric Feeder • Calibrate feeder to dispense 3.0% or 33:1 for routine cleaning • For difficult-to-clean tooling, or tooling which is not routinely cleaned, start at 4.0% or 25:1 • This style of feeder is highly recommended for at-the-throat metering of Cesa Clean Blending Units Most blenders have an extra bin for an additive • Fill the additive bin with Cesa Clean • Set blender to introduce the Cesa Clean at 2.0 to 4.0% • Note: Do not air convey any further than 15 feet as Cesa Clean has a high density and may separate from the mix. GETTING STARTED TIMING IS THE KEY TO A RUNNING COLOR CHANGE Hand Blend • Have the purge blend ready to load • If hopper contains a mixture of resin, color and/ or regrind, it should be run dry or drained before beginning the color change, keeping the screw full so press cycle continues • Run the main resin hopper dry or shut off hopper to hand feed at the throat • Once press is clean, slide hopper in place and proceed with next color-resin blend • The next color can be added while Cesa Clean is still in the barrel • When splay is no longer visible in parts, reset shot size, parts should be ready to pack (Single) Volumetric/Gravimetric Metering Unit at the Throat • Empty and clean feeder while press continues to run • Add Cesa Clean to the feeder color hopper and calibrate to a 3.0% use rate • When press is clean, start next color • When splay is no longer visible in parts, reset shot size, parts should be ready to pack • Note: If an open/unused secondary feeder is installed, use it for the Cesa Clean concentrate Central Blending Unit • Thoroughly clean unit while continuing to mold parts, keeping a resin feed to the press • Using a clean open hopper or regrind hopper, add the Cesa Clean concentrate • Set blender for additive/color to 3.0% • Once press is clean, drain hopper and/or central blending unit while continuing to mold parts • Begin new color and continue to mold parts • When splay is no longer visible in parts, reset shot size, parts should be ready to pack Process Adjustments That Can Help • Increase back pressure • Increase screw speed • Increase injection speed (in some tools maximum injection speed can facilitate cleaning) • Reduce mold close time (faster cycle) • Always remember a stock temperature of 400°F is essential When press and tool are clean, return all settings to standard production process profile.

Cesa™ Fiber Additives Cesa™ Unify™ A4R Cesa™ IR Additives