GUIDELINES FOR USING CESA CLEAN ADDITIVES • Cesa Clean works best when molded maintaining normal (injection) pressure/shear • For best results, Avient recommends a “Running Color Change” which eliminates breaks in the molding cycle • Since the Cesa Clean concentrate will expand, it is recommended to reduce the shot size by 20% • It is designed for use at a let-down ratio (LDR) of 3.0% or (33:1); however, use rate can vary depending on the severity of the contamination but typically is 2.0–4.0% (a use rate higher than 6.0% may not have any positive affect on the cleaning performance) • Using Cesa Clean as a routine part of your color change rotation will allow faster changes and consume a minimal amount of raw material - Note: If the manifold is not cleaned routinely, this process may be more time consuming and additional material will be required • It is best to process at your normal polymer processing temperatures - For best performance, stock temperature should be at least 400°F - If 400°F is achieved during the purging process, no additional activation will occur during the reprocessing of regrind - All parts produced during the “Running Purge Cycle” should be captured as regrind, resulting in a scrap-free color change - If using sequential gates, open and close all gates at the same time while purging the tool - If contamination appears to be coming from one gate, open and close first, and for an extended period of time, to force more material through this location - When cleaning in this manner, pay close attention to shot size - Parts containing the previous or new color plus any Cesa Clean can be used as regrind INTRODUCING CESA CLEAN TO YOUR PROCESS Hand Blend • Hand weigh enough of the Cesa Clean and natural resin mix to equate to 3–5 times the barrel capacity • Use rate should be 3.0% or 33:1 for routine cleaning • For difficult-to-clean tooling, or tooling which is not routinely cleaned, start at 4.0% or 25:1 • Note: Do not attempt to vacuum load more than 15 feet from source as stratification/separation may occur Volumetric Feeder • Calibrate feeder to dispense 3.0% or 33:1 for routine cleaning • For difficult-to-clean tooling, or tooling which is not routinely cleaned, start at 4.0% or 25:1 • This style of feeder is highly recommended for at-the-throat metering of Cesa Clean Blending Units Most blenders have an extra bin for an additive • Fill the additive bin with Cesa Clean • Set blender to introduce the Cesa Clean at 2.0 to 4.0% • Note: Do not air convey any further than 15 feet as Cesa Clean has a high density and may separate from the mix.

FIBER-LINE™ PERFORMANCE ENHANCING COATINGS PRODUCT SELECTION GUIDE FIBER-LINE™ COATING SELECTION GUIDE COATING Bondcoat™ Adhesion Enhancing Colorcoat™ Fiber Color Packcoat™ Performance Enhancing Protexcoat™ UV Resistant Swellcoat™ Blocker Water Blocking Swellcoat™ Water Absorbing Wearcoat™ High Abrasion Blockcoat™ Anti-Wicking Repelcoat™ Water Repellant Flamecoat™ Flame Resistant FEATURES • Created for applications where an untreated fiber does not have the ability to provide the appropriate amount of bonding characteristics to another material • Provides adhesion to another fiber or substrate without impacting other performance properties • Improves adhesion of the fiber to the resin matrix it is introduced into • Enables industry standard “burst” tests or stringent delamination analysis • Designed to achieve vibrant colors for safety, identification, and aesthetics • Specialized formulas and binders adhere the pigment to the exterior of the individual filaments, while impregnating deep into the fiber bundle • Available by Pantone or RAL number • Compatible with a variety of composite resins including epoxy, polyurethane, and polyethylene • Stronger than solution-dyed fibers • Designed to add lubricity and temperature resistance at the filament level for braided compression packing • Coating at the fiber level versus the finished braid achieves higher % level coating • Fiber level coating extends the life of the braid and reduces required maintenance • Various formulations available • PTFE, silicone, graphite, and mineral oil • Created for high performance fibers that lack inherent ultraviolet (UV) resistance • Coating impregnates the individual fibers with a specialized resin for improved UV protection • Coating enhancements include UV inhibitors, absorbers and stabilizers • Improves the processing of the product via reduced filament snagging and friction • Low level water- blocking finish for any technical fiber or textile substrate • Provides water- blocked strength reinforcements for dry cable designs • Can absorb 5x to 15x its weight in water • Dust-free coating imparts a very soft fiber hand, advantageous to cable, rope, and other textile processes • Patented technology incorporates super absorbent polymer (SAP) suspended in a proprietary resin matrix • Used in the production of ‘dry-dry’ telecommunications, electromechanical, seismic, umbilical and power cables • Can absorb up to 100x its weight in water • Creates a stable gel when exposed to water • Functionally replaces flooding compounds, filling gels, spun SAF yarns, and water blocking tapes • Enables faster, more economical and robust cable manufacturing • Increases durability and abrasion resistance by encapsulating filaments in the fiber bundle • Extends the life of the product by reducing the effects of friction and yarn on yarn abrasion • Protects the fiber from degradation and filamentation • Ideal for high abrasion and high friction applications in a range of fiber constructions and environments • Wicking refers to the tendency of a yarn or other fiber to draw moisture into filaments via capillary action • Coatings designed to prevent moisture from wicking within and between fibers and strands • Protects Wire or Optical Fiber from damaging effects of moisture, which can cause a drop in signal and attenuation • Hydrophobic additives used to promote and enhance water repellancy in industrial applications • Creates a waterproof barrier that prevents moisture from further migration • Applied at various % levels to optimize for water-proof ratings • Designed to inhibit or slow the spread of fire/flame • Coupled to fibers with inherent flame and thermal resistance to boost performance • Added to fibers with weak flame resistance to improve burn rating SUITABLE FIBERS • Technora® Fiber • UHMWPE • Graphite Fiber • PTFE Fiber • Technora® Fiber • PET Polyester (All shrinks) • UHMWPE • Vectran® LCP • Technora® Fiber • PET Polyester (All shrinks) • PET Polyester (All shrinks) • UHMWPE • PET Polyester (All shrinks) • PET Polyester (All shrinks) • Vectran® LCP • PET Polyester (All shrinks) PRODUCTS • Belt & Hose Reinforcement Yarn • Braided compression rings and seals • Valve stem packing • Pump packing • Filler Yarn • Synthetic Wire Rope • Buffer Thread • Filler Yarn • FRP Rod • Synthetic Wire Rope Kevlar® and Nomex® are trademarks of DUPONT SAFETY & CONSTRUCTION, INC.

Multi-use medical and dental products • Aerospace parts • Automotive systems • Fuel and chemical handling equipment • Sensors and pumps • Home appliances Let’s get started!

Barcode Scanners • Blood Pressure Monitors • Defibrillators • Infusion Pumps • Ventilators According to the U.S.

January 7, 2019 Jan. 7, 2019

November 7, 2016 Nov. 7, 2016

CLEVELAND, Jan. 7, 2019 /PRNewswire/ -- PolyOne Corporation (NYSE: POL) a premier provider of specialized polymer materials, services and solut January 7, 2019

CLEVELAND, Feb. 7, 2020 /PRNewswire/ -- PolyOne Corporation (NYSE: POL) today announced that the underwriters of its previously consummated public o February 7, 2020

CLEVELAND, April 7, 2020 /PRNewswire/ -- PolyOne Corporation (NYSE: POL) a premier provider of specialized polymer materials, services and sust April 7, 2020

CLEVELAND, May 7, 2018 /PRNewswire/ -- PolyOne Corporation (NYSE: POL), a premier provider of specialized polymer materials, services and solut May 7, 2018