Because advances in laser marking equipment and additive technologies enable high rates of output while still delivering an excellent marking contrast.

Maxxam™ Polyolefin Formulations provided excellent performance with low dielectric constant to make the jacket layer of signal cables have low capacitance loss

Reap the benefits of excellent pigment dispersion in your final polymer mix with Colorant Chromatics™ masterbatch formulations for FEP polymers.

These water-based formulations can help achieve excellent marking on large diameter wires.

In the past, excellent aesthetics often meant compromising processing properties or performance attributes, like slow demolding speed, abrasion or stain resistance. These new materials integrate excellent aesthetics and functionality, including UV and stain resistance, without sacrificing mechanical properties. TECHNICAL BULLETIN 1.844.4AVIENT www.avient.com PROPERTY TEST METHOD UNITS VERSAFLEX™ CE 3130-80N VERSAFLEX™ CE 3130-70N Shore Hardness ASTM D2240 Shore A 79 69 Specific Gravity ASTM D792 g/cm3 1.08 1.04 Tensile Strength ASTM D412 psi 2,484 2,222 Melting Flow Index (190°C, 21.6kg) ASTM D1238 g/10min 5.2 4.4 Elongation ASTM D412 % 864 667 Flexural Modulus @ 300% ASTM D790 psi 975 855 Viscosity @ 11,170 sec, 200°C ASTM D3835 Pa.s 30.6 22.2 Abrasion (Mass Lost) ASTM D3389 mg 1.1 2.6 UV Resistance 0.68W/m2 45°C 168hours — Good Good Stain Resistance *Condition 1 *Condition 2 — Excellent Excellent Blooming 85% RH 30°C,168 hours — Non Non Processing (Demold) — — Excellent Good Cycle Time — — Short Middle Overmold Substrate — — PC/ABS PC/ABS KEY PROPERTIES AND OVERMOLD PERFORMANCE Copyright © 2021, Avient Corporation.

Other requirements were abrasion resistance and excellent aesthetics. They recommended OnFlex-S™ K 65A-3E1709 multicomponent TPE, which offers excellent adhesion to ABS and can be molded at lower temperatures and injection pressures than competitive products. Gripping feel = safety and usability for customers: Hand grips created from overmolded OnFlex-S TPE provide excellent anti-slip performance even when wet.

They are tightly held within the vinyl and have low volatility, so they do not readily evaporate.

• Any action that may be taken at a meeting of the Committee may be taken by written consent so long as the written consent is unanimously approved and filed with the Corporate Secretary

KEY BENEFITS Avient’s UV stabilizers for fibers provide the following benefits: • High active ingredient loading options available • Little or no effect on processing speeds so plant productivity can be maintained at the highest levels • Resistance to interaction with fertilizers, pesticides and bleaching agents in the manufacturing and end-use environment • Can be combined with colors and with other additives (e.g., flame retardants) into a single combination concentrate for convenience • Product guidance and technical assistance from our experts PRODUCT BULLETIN Copyright © 2022, Avient Corporation.

They bind themselves to the plastic in a three dimensional network so they do not contribute to VOC emissions.