Figure 1 Surface energy of various thermoplastic elastomers with rigid thermoplastics Engineering Plastics Polyamide 6,6 ABS Polycarbonate Acrylic Polystyrene Polypropylene Polyethylene Elastomers COPA TPU COPE S-TPE TPV mPE Surface Energy (mN/m) 46 43 40 37 34 31 28 Figure 2 Schematic diagram of the peel test Table I Physical property of TPE-1 Shore A Hardness (10 second delay) 44 Specific Gravity (g/cm3) 0.90 Color Natural 300 % Modulus (PSI) 348 Tensile Strength (PSI) 603 Elongation at Break (%) 598 Tear Strength (lbf/in) 110 Table II Adhesion value of TPE-1 on different substrates Substrate Average Peel Strength (lbf) Failure Type PP 17 Cohesive Copolyester 13 Adhesive PET 13 Adhesive PPE/HIPS 18 Adhesive PMMA 15 Adhesive PS 18 Adhesive PC 17 Adhesive PC/ABS 14 Adhesive HIPS 13 Adhesive ABS 13 Adhesive Table III Properties and peel strength of TPE-2 materials 15.37Nylon 11.16.5POM 227Polyester 22.619PC/ABS 24.5-ABS 20.828PP Peel Strength (PIL) 713721Tensile Elongation (%): 10811010Tensile Strength (psi): 5651Hardness: BA 15.37Nylon 11.16.5POM 227Polyester 22.619PC/ABS 24.5-ABS 20.828PP Peel Strength (PIL) 713721Tensile Elongation (%): 10811010Tensile Strength (psi): 5651Hardness: BA Figure 3 Capillary viscosity of TPE-1 and -2 at 200°C 1.00E+00 1.00E+01 1.00E+02 1.00E+03 1.00E+01 1.00E+02 1.00E+03 1.00E+04 1.00E+05 Shear rate (1/sec) Vi sc os ity (P a* se c) TPE-1 TPE-2A TPE-2B GLS Corporation Abstract Introduction Experimental Material Two classes of “universal overmolding TPEs” have been developed and used in this study.

Except in the case of a force majeure, if not satisfied with Seller’s determination, Buyer as its sole remedy shall have a right to terminate this contract without further obligation upon: (i) 10 calendar days’ written notice; and (ii) payment for all Product received to date. 14. Predávajúci je oprávnený ukončiť túto zmluvu na základe vlastného uváženia písomnou výpoveďou podanou kupujúcemu s výpovednou lehotou 14 kalendárnych dní. 24. Seller may terminate this contract at its sole option upon 14 calendar days’ written notice to Buyer. 24.

Except in the case of a force majeure, if not satisfied with Seller’s determination, Buyer as its sole remedy shall have a right to terminate the contract without further obligation upon: (i) 10 calendar days’ written notice; and (ii) payment for all Product received to date. 14. Seller may terminate the corresponding contract at its sole option upon 14 calendar days’ written notice to Buyer. 24. El Vendedor podrá resolver el contrato correspondiente a su entera discreción mediante notificación por escrito al Comprador con una antelación de 14 días naturales. 24.

Except in the case of a force majeure, if not satisfied with Seller’s determination, Buyer as its sole remedy shall have a right to terminate this contract without further obligation upon: (i) 10 calendar days’ written notice; and (ii) payment for all Product received to date. 14. Seller may terminate this contract at its sole option upon 14 calendar days’ written notice to Buyer. 24. El Vendedor puede rescindir el contrato a su sola discreción mediante notificación escrita al Comprador con una antelación de 14 días corridos. 24.

Steel – Static 0.25 0.46 0.18 0.15 0.12 0.19 0.11 0.14 0.13 0.24 0.17 0.17 Impact Notched Izod Impact (23°C, 3.18 mm, Injection Molded) J/m ASTM D256A 41 64(6) 110 107 107 70 80 37 37 75 – 69 Thermal Properties Heat Deflection Temperature ASTM D648 0.45 MPa °C 215(6) – 250 215 216 184 152 151(6) 153(6) 218(6) – – 1.8 MPa °C 65(6) 239(7) 244(6) 210 210 75 94 81.1(6) 88 197(6) – 135(5) Electrical Properties Surface Resistivity ohms/sq ASTM D254 – – – 1.30x1012 1.9x1012 5.2x1012 – – – – – 1.0x109 Dielectric Strength (Short Time) kV/mm – – 8.5 – – – – – – – – – Flammability Flame Rating Class UL 94 HB – – HB HB HB – HB – – – – LubriOne™ Internally Lubricated Formulations NOTES (1) Type I, 5.1mm/min (2) Type I, 21.3 mm/min (3) Type I, 50 mm/min (4) Type I, 5.1mm/min, Break (5) 3.2 mm thick, Unannealed (6) 6.35 mm thick, Unannealed (7) 3.2 mm thick, Annealed PRODUCT DESCRIPTION UNITS TEST METHOD LB6000- 5024 RS HI Natural LB6000- 5021 RS S1 Black LB6000- 5021 RS X2 Black LB6000- 5019 X1 Black LB6700- 5001 RS AF Black NN- 000/01M Black SO REC LB6600- 5030 RS Grey LB3300- 5010 RS Natural LB3300- 5005 RS Natural REC LB3220- 5001 RS C Natural X1 LB8900- 5010 GP Grey LB8900- 5006 RS PE Natural LB8900- 5004 RS PE Natural LB4200- 5022 Black LB4200- 5023 Natural Base Polymer PA 6 PA6/PA66 PA66 PBT PC PKE POM Lubricant UHMWPE1 UHMWPE UHMWPE UHMWPE UHMWPE MoS22 Graphite UHMWPE UHMWPE UHMWPE Graphite UHMWPE UHMWPE MoS2 UHMWPE Filler type GF10 GF30 GF30 GF50 GF50 Unfilled GF33 GF20 MI20 GF10 Unfilled GF20 GF30 Unfilled Unfilled General Properties Specific Gravity g/cm3 ISO 1183 1.18 1.35 1.39 1.55 1.58 1.14 1.44 1.42 1.46 1.23 1.26 1.34 1.43 1.4 1.35 Mechanical Properties Tensile Modulus (23°C) MPa ISO 527-1 4250 9500 9000 15500 16600 3500 10600 6300 3330 4000 1630 5300 9250 2470 2150 Tensile Strength (Yield, 23°C) MPa ISO-527-2 97 150 160 205 200 85 164 102 55 60 60 108 99.1 55 50 Tensile Elongation (Break, 23°C) % ISO-527-2 12 2.5 3 2.7 2.4 3.4 2.0 4.2 8 2.5 46 3.7 1.5 11 11 Flexural Strength (23°C) MPa ISO 178 103 – – 285 265 108 215 127 78 85 38 155 117 73 68 Flexural Modulus (23°C) MPa ISO 178 3250 – – 12400 11100 2690 9000 4700 3000 3100 1380 4600 5450 2210 2070 Impact Charpy Notched Impact Strength (23°C, Injection Molded) kJ/m^2 ISO 179 14 12 10 15 10 3 6 7.7 4.3 12 15 10 7.6 8 5 Charpy Unnotched Impact Strength (23°C, Injection Molded) kJ/m^2 ISO 179 82 55 61 75 60 65 50 47 69 - NB 63 36 NB NB Thermal Properties Deflection Temperature Under Load 1.8 Mpa, Unannealed °C ISO 75-2/A 107 – – 204 – 73 235 – – – 90 210 204 86 80 Cofficient of Friction (CoF) & Wear Rate CoF vs.

Page 2 of 4 https://abs.ez2xs.com https://abs.ez2xs.com A B S Q u al ity E va lu at io n s C er tif ic at io n E Avient Corporation - Cergy, France Design and Manufacture of Color and Additive Concentrates and Specialty Compounds , 14 Avenue de l'Eguillette Saint Ouen l'Aumône - 95310 France Avient Corporation - Esenyurt, Turkey Design and Manufacture of Specialty Engineered Thermoplastics Orhangazi Mah. 1683 Sok.

All rights reserved. 31307Certificate No: Facility: Avient Corporation - Cergy, France 14 Avenue de l'Eguillette Saint Ouen l'Aumône 95310 France Facility: Avient Corporation - Grace-Hollogne, Belgium Rue Louis Bleriot 7 Grace-Hollogne 4460 Belgium Activity: Design and Manufacture of Color and Additive Concentrates and Specialty Compounds Activity: Warehousing and Dispatching of raw materials Facility: Avient Corporation - Gyor, Hungary Mandulafa Sor 3 Gyor 9027 Hungary Facility: Avient Corporation - Kutno, Poland ul.

If required to 14. Seller may terminate this contract at its sole option upon 14 calendar days’ written notice to Buyer. 25. El Vendedor podrá rescindir este contrato a su exclusiva opción mediante notificación escrita con catorce (14) días calendario de anticipación al Comprador. 25.

Satıcının Şartnamede, Ürünler ve bunların kullanımı ile ilgili bu tür beyanları, örnekleri veya diğer bilgileri yalnızca Alıcının faydalanması için sunulmuştur ve performans garantisi veya beyanı değildir. 14. Satıcı bu sözleşmeyi tamamen kendi takdirinde olmak üzere Alıcı’ya 14 takvim günü öncesinden yazılı bir bildirimde bulunarak feshedebilir. 24. Seller may terminate this contract at its sole option upon 14 calendar days’ written notice to the Buyer. 25.

Except in the case of a force majeure, if not satisfied with Seller’s deter- mination, Buyer as its sole remedy shall have a right to termi- nate this contract without further obligation upon: (i) 10 calen- dar days’ written notice; and (ii) payment for all Product re- ceived to date. 14. Seller may terminate this contract at its sole op- tion upon 14 calendar days’ written notice to Buyer. 24. Säljaren äger rätt att efter eget gottfinnande säga upp detta avtal till upphörande 14 dagar efter skriftligt meddelande därom till Köparen. 24.