https://www.avient.com/resources/safety-data-sheets?page=5265
Avient has transitioned our Material Safety Data Sheets (MSDSs) to Safety Data Sheets (SDSs) for our manufactured products to meet the requirements of the Globally Harmonized System of Classification and Labeling of Chemicals (GHS), and CLP classification in Europe.
Technical Data Sheets
Safety Data Sheets
https://www.avient.com/resources/safety-data-sheets?page=7198
Avient has transitioned our Material Safety Data Sheets (MSDSs) to Safety Data Sheets (SDSs) for our manufactured products to meet the requirements of the Globally Harmonized System of Classification and Labeling of Chemicals (GHS), and CLP classification in Europe.
Technical Data Sheets
Safety Data Sheets
https://www.avient.com/resources/safety-data-sheets?page=7116
Avient has transitioned our Material Safety Data Sheets (MSDSs) to Safety Data Sheets (SDSs) for our manufactured products to meet the requirements of the Globally Harmonized System of Classification and Labeling of Chemicals (GHS), and CLP classification in Europe.
Technical Data Sheets
Safety Data Sheets
https://www.avient.com/sites/default/files/2024-03/Terms and Conditions of Sale for Sweden.pdf
Seller warrants good and clear title in goods subject to the sale (“Product”) and that the Product con- forms at the time of shipment to a Certificate of Analysis, a Cer- tificate of Compliance, or a Product Specification Sheet, if any such document exists, and other specifications signed by Seller (“Specifications”).
Buyer acknowledges that information in Seller’s marketing materials, technical data sheets and other de- scriptive publications distributed or published on its websites beskrivs ovan ska alla utestående fordringar från Säljaren omedelbart förfalla till betalning avseende de Produkter som levererats till Köparen och inte återtagits av Säljaren. 10.
Buyer acknowledges that Seller has furnished to Buyer Safety Data Sheets, which include warnings together with safety and health information concerning the Product and/or the containers for such Product.
https://www.avient.com/sites/default/files/2021-04/avient-q4-earnings-and-2021-outlook-website.pdf
D is t. ) R P M P P G K W R F U L A V Y G C P IF F F M C H X L H U N E M N F O E E C L K R A S C L A S H C E G R A A LB Median: 5%Median: 3% Source: Peer data per Bloomberg market data as of February 5, 2021 Avient reflects 2021 estimated revenue of $4,100M and excludes one-time synergy capture CAPEX ($20M) Avient Specialty Formulators Other Chemical/Specialty Companies Free Cash Flow Conversion (1) 2021E (%) Being asset light helps us to generate strong free cash flow that is in line with specialty formulators.
Free cash flow conversion calculated as (EBITDA – Capex) / EBITDA Median: 83% Median: 76% HIGH FREE CASH FLOW CONVERSION Avient reflects 2021 estimated EBITDA of $510M and excludes one-time synergy capture CAPEX ($20M) Source: Peer data per Bloomberg market data as of February 5, 2021 85 87 86 86 81 81 59 92 88 81 79 79 79 76 76 75 73 67 67 64 60 7 A vi en t P P G K W R R P M F U L A V Y G C P IF F F M C U N V R H X L E M N B N R E C L C E A S H F O E G R A H U N K R A S C L A L B Source: Peer data per Bloomberg market data as of February 5, 2021 Total Enterprise Value / 2021E EBITDA Our current valuation implies an EBITDA multiple that is significantly below specialty formulator peers and our historic valuations, when the company had considerable exposure to more cyclical and challenging end markets.
Reconciliation of Non-GAAP Financial Measures (Unaudited) (Dollars in millions, except for per share data) Senior management uses comparisons of adjusted net income from continuing operations attributable to Avient shareholders and diluted adjusted earnings per share (EPS) from continuing operations attributable to Avient shareholders, excluding special items, to assess performance and facilitate comparability of results.
https://www.avient.com/sites/default/files/2024-09/Terms and Conditions of Sale for Denmark.pdf
Sælger har baseret alle anbefalinger til Køber på oplysninger, som Sælger anser Seller warrants good and clear title in goods subject to the sale (“Product”) and that the Product con- forms at the time of shipment to a Certificate of Analysis, a Certificate of Compliance, or a Product Specification Sheet, if any such document exists, and other specifications signed by Seller (“Specifi- cations”).
Buyer acknowledges that information in Seller’s marketing materials, technical data sheets and other descriptive publications distributed or published on its websites may vary from time to time without no- tice.
Buyer acknowledges that Seller has furnished to Buyer Safety Data Sheets, which include warnings to- gether with safety and health information concern- ing the Product and/or the containers for such Prod- uct.
https://www.avient.com/sites/default/files/2022-03/Avient 2022 Proxy Statement.pdf
Safety and Health The top priority at Avient is the safety and health of our associates and our ultimate goal is to operate injury free.
The second independent source of data that we used to augment the peer proxy analysis was the Consultantʼs analysis of competitive market data relating to other applicable general industries.
The CEO makes his recommendations in conjunction with the marketplace data.
https://www.avient.com/sites/default/files/2021-08/avient-cdp-climate-change-questionnaire-2021.pdf
In all of its activities, Avient puts high emphasis on environmental protection and safety.
C0.2 (C0.2) State the start and end date of the year for which you are reporting data.
In 2019, Avient directed $7.87 MM towards environmental, health and safety capital improvements.
https://www.avient.com/sites/default/files/2020-11/eccoh-processing-guide.pdf
ADDITIONAL INFORMATION See respective data sheets for specific temperature recommendations.
https://www.avient.com/sites/default/files/2020-10/luxury-closures-gravi-tech-design-guide-2.0-application-specific.pdf
A larger processing window will account for the lot to lot changes between materials, without having to make process changes.3 Setting the Beginning Variables • Injection Pressure = Maximum of machine - Should not be pressure limited • Injection Velocity = Maximum of machine - This is for the injection velocity curve starting point - If flashing is an issue start slower and then increase • Injection Cut-Off Time = 15 seconds - This is only a limiting factor, needs to be above 10 seconds for velocity graph • Hold Pressure = 0 - Need to get 95% full part with a hold pressure of 0 • Hold Time = 10-15 seconds - Need to ensure gate is frozen • Screw Speed = 90% of Maximum - Unless shear sensitive material, if shear sensitive, set RPMs to optimum • Cooling Time = 10–15 seconds • Shot Size = 50% of calculated part volume • Decompression = .25" • Transfer Position = High enough to ensure a cushion - Cushion size does not matter but there must be a cushion to keep a constant pressure on the melt during hold time - Typically 0.25" is sufficient • Back Pressure = 800-1000 plastic pressure - 100–150 hydraulic pressure - Unless specified by material data sheet Determining Shot Size The shot size should be determined by calculating the combined volume of the parts and the runner system.
If the material is shear-sensitive, consult the material data sheet or processing guide for instructions to set recovery time • The cooling time should only be 1–2 seconds longer than the screw recovery time, unless dictated by dimensional stability or part thickness Minimize Clamp Pressure This step is done to reduce the amount of energy used by the machine. • Reduce the clamp tonnage until flash is seen around the parting line, then increase the clamp tonnage by 5-10% Minimize Cycle Time • Mold Open/Close – Should be as fast as possible, without slamming, and still produce a nice fluid motion • Ejector Speed – As fast as possible, without influencing part quality • Ejector Stroke – Only stroke the ejectors as many times as needed to separate the part from the core - i.e.
Shot Size = 1.00 + .10 = 1.10, Transfer Position = .50 + .10 = .60 Set Safeties This step is to ensure the machine will alarm and alert nearby employees if the machine malfunctions, or if a part gets stuck. • Injection Fill Time – Should be 10% above the actual fill time • Injection Pressure – Should be 200 psi hydraulic pressure, or 2000 psi plastic pressure higher than actual • Recovery Timer – Should be 1–2 seconds above actual recovery time • Cycle Time – Should be 2–3 seconds above actual cycle time PROCESS DISTINCTIONS When processing Gravi-Tech materials, the “hot and fast” approach is used most often.