MATERIAL DESCRIPTION BASE RESIN Trilliant™ HC2020 Copolyester Trilliant™ HC8910/8920 Polyketone/ABS blend Trilliant™ HC2120 Tritan Trilliant™ HC3120 PC Trilliant™ HC5210 PP Trilliant™ HC6010 PA6 Trilliant™ HC6610 PA66 Trilliant™ GRV-NP-110-W PA12 TRILLIANT™ HC THERMOPLASTICS • Chemically resistant replacement for FR PC/ABS, FR PC/PET & FR COPE, providing UL 94 Yellow Card V-0 flame rating at 1.5 mm, V-1 at 0.75 mm thicknesses for a broad color spectrum • Outperforms PC/ABS, PC/PET and COPE in resistance to common disinfectants • Retains tensile strength after 72-hour exposure to common hospital disinfectants, and shows better long-term chemical resistance as compared to PC blends and COPE • Exhibits good impact and temperature resistance • Available in natural grades, standard medical colors, or custom pre-colored products Applications: • Medical device housings • MRI, X-ray, CT scanner components • Surgical instruments such as staplers, dissectors, scissors • Auto-injector pen TRILLIANT™ HC ELECTRICALLY CONDUCTIVE FORMULATIONS • Consistent conductivity ensures repeatable part performance and minimizes failures related to inconsistent electrical conductivity • High flow and easy processing facilitate filling of thin wall parts and multiple cavity tools, which enable faster cycle times and lower per-unit part costs • Superior durability reduces breakage and resultant scrap related costs • Less tendency to flash results in improved appearance and less fluid retention in or on the tip, thus driving greater accuracy and less potential for cross-contamination • High strength produces parts with greater stiffness and warp resistance, again minimizing scrap-related costs Applications: • Conductive pipette tips TEST TEMS SPECIFIC GRAVITY MELT FLOW RATE (230OC, 2.16KG) TENSILE STRENGTH FLEXURAL STRENGTH FLEXURAL MODULUS IMPACT STRENGTH NOTCHED, IZOD SURFACE RESISTIVITY Method ASTM D-792 ASTM D-1238 ASTM D-638 ASTM D-790 ASTM D-790 ASTM D-256 ASTM D-257 Unit -- g/10min MPa MPa MPa J/m Ohms/sq.

CERTIFICATE Signed for the certification body: Eric Louys Chairman Certification Committee CERTIFICATE EN ISO 50001 : 2018 Energy Management System VINÇOTTE nv Jan Olieslagerslaan 35, 1800 Vilvoorde, Belgium This is to certify that Avient Located at Rue Melville Wilson 2 5330 Assesse Belgium has established and maintains an energy management system according the requirements of EN ISO 50001 : 2018 “Energy Management System” for: Design and manufacture of colour and additive concentrates, thermoplastic resins and speciality compounds This certificate is based on the result of an energy audit documented in the audit report 61231731.

He has more than 35 years of experience in the Chemicals industry.

He has more than 35 years of experience in the Chemicals industry.

He has more than 35 years of experience in global leadership roles in the chemicals industry.

This product selection guide provides detailed information to help you select the Maxxam product that’s right for your application. 4 INJECTION MOLDING POLYPROPYLENE Product Code - - - PP5113 B44 F5134T2-4 PP5130 B63 F5134T4-1 Filler Percentage - % - 13 20 30 40 Tensile Strength Yield psi ASTM D638 5000 4800 4600 4500 MPa ISO 527 33 33 32 31 Tensile Elongation Yield % ASTM D638 6 4 3 2 ISO 527 Break % ASTM D638 60 30 15 10 ISO 527 Flexural Modulus 73°F (23°C) psi ASTM D790 300,000 360,000 400,000 460,000 MPa ISO 178 2300 2450 2900 3300 Notched Izod Impact 73°F (23°C) ft-lb/in ASTM D256 0.65 0.60 0.55 0.50 kJ/m2 ISO 180 3.50 3.3 3.00 2.75 Heat Deflection 66 psi °F ASTM D648 230 240 260 275 °C ISO 75 110 116 127 135 264 psi °F ASTM D648 130 140 150 175 °C ISO 75 54 60 66 79 Specific Gravity 73°F (23°C) - ASTM D792 0.99 1.04 1.15 1.25 ISO 1183 Linear Shrinkage Range 1/8 in wall % - 1.2–1.6 1.0–1.4 0.8–1.2 0.6–1.0 3.2 mm wall % - 1.2–1.6 1.0–1.4 0.8–1.2 0.6–1.0 Product Code - - - PP6113 A77-SM PP6120 B16-2 PP6130 B11 PP6135 B40-UV Filler Percentage - % - 13 20 30 35 Tensile Strength Yield psi ASTM D638 4350 3500 2600 3700 MPa ISO 527 30 24 18 26 Tensile Elongation Yield % ASTM D638 5 4 7 6 ISO 527 Break % ASTM D638 35 70 150 70 ISO 527 Flexural Modulus 73°F (23°C) psi ASTM D790 290,000 280,000 280,000 390,000 MPa ISO 178 2000 1950 1750 2700 Notched Izod Impact 73°F (23°C) ft-lb/in ASTM D256 0.7 2.7 4.5 0.65 kJ/m2 ISO 180 4.0 14 24 3.5 Heat Deflection 66 psi °F ASTM D648 239 215 225 250 °C ISO 75 115 102 107 123 264 psi °F ASTM D648 140 125 130 150 °C ISO 75 60 52 54 60 Specific Gravity 73°F (23°C) - ASTM D792 0.99 1.05 1.15 1.18 ISO 1183 Linear Shrinkage Range 1/8 in wall % - 1.1–1.5 .9–1.3 0.7–1.1 0.5–0.9 3.2 mm wall % - 1.1–1.5 .9–1.3 0.7–1.1 0.5–0.9 Maxxam™ Talc-Filled Copolymer Polypropylene • Scratch & mar resistant • UL approved • FDA certifiable • Natural, black or colors • High flow grades • UV stabilized • UL approved • FDA certifiable • Natural, black or colors • High flow grades • UV stabilized • Recycled content Maxxam™ Talc-Filled Homopolymer Polypropylene Offers a moderate level of impact strength and improved stiffness and heat deflection performance. Offers a high level of stiffness and heat resistance as well as excellent impact resistance • Chemically coupled • UL approved • FDA certifiable • Natural, black or colors • High flow grades • Recycled content • Chemically coupled • UL approved • FDA certifiable • Natural, black or colors • High flow grades • UV stabilized INJECTION MOLDING POLYPROPYLENE Product Code - - - PP5410 B1 PP5420 B1 PP5430 B5 PP5440 B1 Reinforcement % - - - 10 20 30 40 Specific Gravity 73°F (23°C) - ASTM D792 0.96 1.05 1.14 1.23 ISO 1183 Tensile Strength Yield psi ASTM D638 8000 10000 11500 13000 MPa ISO 527 55 69 79 90 Tensile Elongation Break % ASTM D638 8 2 2 2 ISO 527 Flexural Modulus 73°F (23°C) psi ASTM D790 525,000 795,000 850,000 1,000,000 MPa ISO 178 3600 5450 5800 7550 Notched Izod Impact 73°F (23°C) ft-lb/in ASTM D256 1.10 1.30 1.50 1.60 kJ/m2 ISO 180 6.00 7.25 8.25 8.50 Heat Deflection 66 psi °F ASTM D648 280 305 310 315 °C ISO 75 138 152 154 157 264 psi °F ASTM D648 250 280 290 300 °C ISO 75 121 138 143 149 Linear Shrinkage Range 1/8 in wall % - 0.4–0.7 0.3–0.6 0.3–0.6 0.2–0.5 3.2 mm wall % - 0.4–0.7 0.3–0.6 0.3–0.6 0.2–0.5 Product Code - - - PP7410 A241 PP7420 B77 PP6430 A206-UV PP6435 B1 Reinforcement % - - - 10 20 30 35 Specific Gravity Yield - ASTM D792 0.98 1.05 1.14 1.17 ISO 1183 Tensile Strength Yield psi ASTM D638 5300 9200 9000 13300 MPa ISO 527 37 64 62 92 Tensile Elongation Break % ASTM D638 8 4 4 4 ISO 527 Flexural Modulus 73°F (23°C) psi ASTM D790 240,000 420,000 695,000 810,000 MPa ISO 178 1650 2900 4800 5600 Notched Izod Impact 73°F (23°C) ft-lb/in ASTM D256 5.0 1.60 1.60 2.50 kJ/m2 ISO 180 27.5 9.00 9.00 14.00 Heat Deflection 66 psi °F ASTM D648 298 313 297 300 °C ISO 75 144 156 152 149 264 psi °F ASTM D648 210 272 265 288 °C ISO 75 92 133 128 142 Linear Shrinkage Range 1/8 in wall % - 0.4–0.7 0.3–0.6 0.3–0.6 0.2–0.5 3.2 mm wall % - 0.4–0.7 0.3–0.6 0.3–0.6 0.2–0.5 Maxxam™ Glass Fiber Reinforced Homopolymer Polypropylene PROPERTY CONDITION UNITS METHOD PRODUCT EXAMPLES Maxxam™ Glass Fiber Reinforced Copolymer Polypropylene 71.866.POLYONE www.polyone.com INJECTION MOLDING POLYPROPYLENE Product Code - - - PP5312 B1 PP5320 A285 PP5330 A123 PP5340 B2 Reinforcement % - % - 12 20 30 40 Specific Gravity 73°F (23°C) - ASTM D792 0.99 1.05 1.15 1.24 ISO 1183 Tensile Strength Yield psi ASTM D638 4800 4400 3600 4900 MPa ISO 527 31 30 32 38 Tensile Elongation Yield % ASTM D638 5 4 4 3 ISO 527 Break % ASTM D638 20 15 20 10 ISO 527 Flexural Modulus 73°F (23°C) psi ASTM D790 285,000 380,000 355,000 460,000 MPa ISO 178 1950 2600 2450 3200 Notched Izod Impact 73°F (23°C) ft-lb/in ASTM D256 0.6 0.55 1.5 0.60 kJ/m2 ISO 180 3.30 3.00 8.25 3.30 Heat Deflection 66 psi °F ASTM D648 235 255 230 280 °C ISO 75 113 124 110 138 264 psi °F ASTM D648 135 156 150 180 °C ISO 75 57 69 66 82 Linear Shrinkage Range 1/8 in wall % - 1.4–1.9 1.0–1.4 1.1–1.5 0.6–1.0 3.2 mm wall % - 1.4–1.9 1.0–1.4 1.1–1.5 0.6–1.0 Offers improved stiffness and heat deflection as well as outstanding dimensional stability. • Chemically coupled • Natural or black • High flow grades • Recycled content Maxxam™ Mica Reinforced Polypropylene PROPERTY CONDITION UNITS METHOD PRODUCT EXAMPLES Maxxam™ Glass/Mineral Reinforced Polypropylene Offers a high level of stiffness and heat deflection as well as reduced warpage and increased dimensional stability. • Chemically coupled • Impact modified • Natural or black • High flow grades • Recycled content Product Code - - - PP5920 B10 PP5935 B1 PP5940 B131 PP5950 B10 Reinforcement Type - - - Glass/Mica Glass/Mica Glass/Mica Glass/Mica Reinforcement % - % - 20 35 40 50 Specific Gravity 73°F (23°C) - ASTM D792 1.05 1.17 1.25 1.34 ISO 1183 Tensile Strength Yield psi ASTM D638 7000 9000 10,000 12,800 MPa ISO 527 Tensile Elongation Break % ASTM D638 6 5 5 2 ISO 527 Flexural Modulus 73°F (23°C) psi ASTM D790 550,000 780,000 870,000 1,300,000 MPa ISO 178 3900 5500 5800 9000 Notched Izod Impact 73°F (23°C) ft-lb/in ASTM D256 0.7 0.9 1.3 1.5 kJ/m2 ISO 180 4.0 5.0 7.0 8.0 Heat Deflection 66 psi °F ASTM D648 304 315 310 315 °C ISO 75 151 157 154 157 264 psi °F ASTM D648 225 298 290 310 °C ISO 75 107 148 143 154 Maxxam™ XST Thermoplastic Olefins (TPO) Offers exceptional stiffness to impact balance including excellent cold temperature impact resistance. • Scratch & mar resistant • Natural, black or colors • High flow grades • UV stabilized Product Code - - - TP9000 A3 TP9110 A701-SM TP9120 B397 TP9120 A525-SM TP9130 A954 Reinforcement Type - - - Talc Talc Talc Talc Talc Reinforcement % - % - 5 11 18 20 30 Specific Gravity 73°F (23°C) - ASTM D792 0.94 0.97 1.01 1.04 1.12 ISO 1183 Tensile Strength Yield psi ASTM D638 2400 3000 2750 3600 3450 MPa ISO 527 18 22 19 25 24 Tensile Elongation Yield % ASTM D638 12 6 5 4 8 ISO 527 Break % ASTM D638 >400 100 170 30 250 ISO 527 Flexural Modulus 73°F (23°C) psi ASTM D790 140,000 260,000 235,000 300,000 325,000 MPa ISO 178 1100 1800 1620 2000 2250 Notched Izod Impact 73°F (23°C) ft-lb/in ASTM D256 No Break 6 10 2 2.2 kJ/m2 ISO 180 68.0 36.0 53.0 11.0 12.0 -30°C ft-lb/in ASTM D256 1.5 1.2 1.3 0.7 0.8 kJ/m2 ISO 180 8.5 6.0 7.0 3.9 4.0 Heat Deflection 66 psi °F ASTM D648 160 208 205 220 218 °C ISO 75 83 98 96 110 105 264 psi °F ASTM D648 100 143 140 160 160 °C ISO 75 50 62 57 70 71 Multiaxial Impact @ 6.6 m/s 0°C ASTM D3763 100% Ductile 100% Ductile 100% Ductile -30°C ASTM D3763 100% Ductile 100% Ductile PROPERTY CONDITION UNITS METHOD PRODUCT EXAMPLES INJECTION MOLDING POLYPROPYLENE 8 91.866.POLYONE www.polyone.com Maxxam™ HST Filled Polypropylene with High Strength and Stiffness Maxxam™ LO Low Odor Talc-Filled Polypropylene Reinforced grades that provide exceptional levels of strength and stiffness. Formulated for underhood automotive HVAC use to minimize unwanted odor while reducing VOC emissions. • Chemically coupled • Natural or black • High flow grades • Provides heat stabilization • Excellent balance of properties • Natural, black or custom colors Product Code - - - PX5430 B1 PX5435 B1 PX5440 B1 PX5450 B1 Reinforcement Type - - - Glass Glass Glass Glass Reinforcement % - % - 30 35 40 50 Specific Gravity 73°F (23°C) - ISO 1183 1.13 1.18 1.23 1.35 Tensile Strength Yield MPa ISO 527 102 105 113 130 Flexural Modulus 73°F (23°C) MPa ISO 178 6500 8000 9400 11,500 Notched Izod Impact 73°F (23°C) kJ/m2 ISO 180 9.4 9.3 11.0 12.0 Heat Deflection 264 psi °C ISO 75 152 152 153 154 Product Code - - - PP5120 B270-LO MFR g/10 min ISO 1133 12 Tensile Modulus MPa ISO 527 3320 Tensile Stress Yield MPa ISO 527 32 Tensile Elongation Yield % ISO 527 4.6 Tensile Elongation Break % ISO 527 17 Flexural Modulus MPa ISO 178 3000 Charpy Impact 73°F (23°C) kJ/m2 ISO 179/1eU 38 Heat Aging 150°C h VW 44045 700 hr VOC µg/g VDA 278 23.5 Fog µg/g VDA 278 30.5 Carbon Emissions µgC/g VDA 277 18 Odor Grade VDA 270 B3 3 • High flow grades • UV stabilized PROPERTY CONDITION UNITS METHOD PRODUCT EXAMPLES INJECTION MOLDING POLYPROPYLENE PROPERTY CONDITION UNITS METHOD PRODUCT EXAMPLES 10 Maxxam™ Filled & Reinforced Polypropylene A range of melt flows to process well in sheet extrusion, thermoforming, profile extrusion and blow molding operations. • FDA certifiable • Scratch & mar resistant • Impact modified • Natural, black or colors • UV stabilized • Chemically coupled EXTRUSION & BLOW MOLDING POLYPROPYLENE Product Code - - - EP6713 B1 EP6130 B10 EP6430 B1 EP5240 B145 EP7920 B1 Reinforcement Type - - - Talc Mineral Glass CaCO3 Glass/ Mineral Reinforcement % - % - 13 30 30 40 20 Specific Gravity 73°F (23°C) - ASTM D792 0.99 1.12 1.12 1.25 1.05 ISO 1183 Tensile Strength Yield psi ASTM D638 4800 4200 10,000 3600 6500 MPa ISO 527 31 29 69 35 45 Tensile Elongation Yield % ASTM D638 6 8 2 5 6 ISO 527 Break % ASTM D638 100 110 5 70 100 ISO 527 Flexural Modulus 73°F (23°C) psi ASTM D790 325,000 360,000 850,000 350,000 400,000 MPa ISO 178 2250 2400 5800 2400 2750 Notched Izod Impact 73°F (23°C) ft-lb/in ASTM D256 4.0 1.5 4.3 1.1 2.4 kJ/m2 ISO 180 20.0 8.0 24.0 6.0 13.0 Heat Deflection 66 psi °F ASTM D648 230 242 315 240 293 °C ISO 75 110 115 157 116 145 264 psi °F ASTM D648 130 158 270 140 212 °C ISO 75 54 68 132 60 100 PROPERTY CONDITION UNITS METHOD PRODUCT EXAMPLES 111.866.POLYONE www.polyone.com EXTRUSION & BLOW MOLDING POLYPROPYLENE Maxxam™ Filled & Reinforced High Density Polyethylene Specifically designed for blow molding and sheet extrusion/thermoforming of structural parts.

He has more than 35 years of experience in global leadership roles in the chemicals industry.

DURABILITY High Impact Strength, Weatherability SOLUTION: PP, HDPE, ASA, Nylon Engineered Formulations AESTHETIC APPEAL Custom Color & Special Effects, Paint Replacement SOLUTION: Custom Polymer Colorants, Pre-Colored High-Gloss Thermoplastics THERMAL MANAGEMENT LED Heat Sinks, Design Flexibility SOLUTION: Thermally Conductive Formulations EXTREME PERFORMANCE Chemical & Fire Resistance, High Temperature Performance SOLUTION: Nylon Engineered Formulations, Long Fiber Reinforced Composites, Continuous Fiber Composite Tapes & Laminates, Flame Retardant Polyolefin Formulations STRUCTURAL INTEGRITY High Stiffness-to-Weight Ratio, Metal Replacement SOLUTION: Pultruded Rods, Tubes & Custom Profiles, Long Fiber Reinforced Composites SENSORY EXPERIENCE Vibration Damping, Durability, Customization, Custom Color, Low Friction SOLUTION: Thermoplastic Elastomers (TPEs), Custom Polymer Colorants, Internally Lubricated Formulations, Advanced Composite Springs STRENGTH & STABILITY Excellent Dimensional Stability, High Stiffness, Impact Resistance SOLUTION: Short & Long Fiber Formulations, Continuous Fiber Composite Tapes & Laminates SURFACE PROTECTION Performance Enhancements SOLUTION: Scratch & Mar Resistance, UV Stable Additives, Anti-Static Additives STRUCTURAL PERFORMANCE Corrosion Resistance, Lightweighting SOLUTION: Long Fiber Reinforced Composites, Nylon Engineered Formulations, Continuous Fiber Composite Tapes & Laminates, Chemical Foaming Additives METAL REPLACEMENT Lightweighting, Heat Management, Load Carrying Capability SOLUTION: Long Fiber Reinforced Composites, Continuous Fiber Composite Tapes & Laminates TACTILE EXPERIENCE Soft-Touch Feel, Durability SOLUTION: Thermoplastic Elastomers (TPEs) https://www.avient.com/industries/consumer/outdoor-recreation/powersports https://www.avient.com/industries/consumer/outdoor-recreation/powersports https://www.avient.com/products/engineered-polymer-formulations/general-engineered-formulations/maxxam-polyolefin-formulations https://www.avient.com/products/engineered-polymer-formulations/general-engineered-formulations/edgetek-engineered-polymer-formulations https://www.avient.com/products/engineered-polymer-formulations/general-engineered-formulations/edgetek-engineered-polymer-formulations https://www.avient.com/products/engineered-polymer-formulations/general-engineered-formulations/nymax-bergamid-polymer http://www.avient.com/products/polymer-colorants https://www.avient.com/products/engineered-polymer-formulations/general-engineered-formulations/artisan-pre-colored-thermoplastics-paint-replacement http://www.avient.com/products/engineered-polymer-formulations/conductive-signal-radiation-shielding-formulations/therma http://www.avient.com/products/engineered-polymer-formulations/conductive-signal-radiation-shielding-formulations/therma http://www.polyone.com/products/engineered-polymer-formulations/general-engineered-formulations/nymax-bergamid-polymer http://www.polyone.com/products/engineered-polymer-formulations/general-engineered-formulations/nymax-bergamid-polymer https://www.polyone.com/products/engineered-polymer-formulations/structural-fiber-reinforced-formulations/long-fiber https://www.polyone.com/products/engineered-polymer-formulations/structural-fiber-reinforced-formulations/long-fiber https://www.avient.com/products/advanced-composites/continuous-fiber-composite-tape-laminates-and-barstock/polystrand https://www.avient.com/products/advanced-composites/continuous-fiber-composite-tape-laminates-and-barstock/polystrand https://www.avient.com/products/engineered-polymer-formulations/flame-retardant-formulations/maxxam-fr-flame-retardant-polyolefin-formulations https://www.avient.com/products/engineered-polymer-formulations/flame-retardant-formulations/maxxam-fr-flame-retardant-polyolefin-formulations https://www.avient.com/products/advanced-composites/pultrusion-and-continuous-filament-winding-technology/glasforms-pultruded-rods-tubes-custom-profiles https://www.avient.com/products/advanced-composites/pultrusion-and-continuous-filament-winding-technology/glasforms-pultruded-rods-tubes-custom-profiles https://www.avient.com/products/engineered-polymer-formulations/structural-fiber-reinforced-formulations/long-fiber-thermoplastics https://www.avient.com/products/engineered-polymer-formulations/structural-fiber-reinforced-formulations/long-fiber-thermoplastics http://www.avient.com/products/polymer-colorants https://www.avient.com/products/engineered-polymer-formulations/general-engineered-formulations/lubrione-internally-lubricated-formulations https://www.avient.com/products/engineered-polymer-formulations/general-engineered-formulations/lubrione-internally-lubricated-formulations https://www.avient.com/products/advanced-composites/pultrusion-and-continuous-filament-winding-technology/advanced-composite-springs https://www.avient.com/products/engineered-polymer-formulations/structural-fiber-reinforced-formulations https://www.avient.com/products/engineered-polymer-formulations/structural-fiber-reinforced-formulations https://www.avient.com/products/polymer-additives/performance-enhancement-additives/oncap-scratch-mar-resistance-additives https://www.avient.com/products/polymer-additives/performance-enhancement-additives/oncap-scratch-mar-resistance-additives http://www.avient.com/products/polymer-additives/uv-and-light-blocking-additives http://www.avient.com/products/polymer-additives/uv-and-light-blocking-additives http://www.avient.com/products/polymer-additives/performance-enhancement-additives/oncap-antistatic-additives http://www.avient.com/products/polymer-additives/performance-enhancement-additives/oncap-antistatic-additives http://www.avient.com/products/engineered-polymer-formulations/general-engineered-formulations/nymax-bergamid-polymer http://www.avient.com/products/engineered-polymer-formulations/general-engineered-formulations/nymax-bergamid-polymer https://www.avient.com/products/polymer-additives/foaming-agents/colormatrix-excelite-chemical-foaming-additives

FIBER-LINE™ PERFORMANCE ENHANCING COATINGS PRODUCT SELECTION GUIDE FIBER-LINE™ COATING SELECTION GUIDE COATING Bondcoat™ Adhesion Enhancing Colorcoat™ Fiber Color Packcoat™ Performance Enhancing Protexcoat™ UV Resistant Swellcoat™ Blocker Water Blocking Swellcoat™ Water Absorbing Wearcoat™ High Abrasion Blockcoat™ Anti-Wicking Repelcoat™ Water Repellant Flamecoat™ Flame Resistant FEATURES • Created for applications where an untreated fiber does not have the ability to provide the appropriate amount of bonding characteristics to another material • Provides adhesion to another fiber or substrate without impacting other performance properties • Improves adhesion of the fiber to the resin matrix it is introduced into • Enables industry standard “burst” tests or stringent delamination analysis • Designed to achieve vibrant colors for safety, identification, and aesthetics • Specialized formulas and binders adhere the pigment to the exterior of the individual filaments, while impregnating deep into the fiber bundle • Available by Pantone or RAL number • Compatible with a variety of composite resins including epoxy, polyurethane, and polyethylene • Stronger than solution-dyed fibers • Designed to add lubricity and temperature resistance at the filament level for braided compression packing • Coating at the fiber level versus the finished braid achieves higher % level coating • Fiber level coating extends the life of the braid and reduces required maintenance • Various formulations available • PTFE, silicone, graphite, and mineral oil • Created for high performance fibers that lack inherent ultraviolet (UV) resistance • Coating impregnates the individual fibers with a specialized resin for improved UV protection • Coating enhancements include UV inhibitors, absorbers and stabilizers • Improves the processing of the product via reduced filament snagging and friction • Low level water- blocking finish for any technical fiber or textile substrate • Provides water- blocked strength reinforcements for dry cable designs • Can absorb 5x to 15x its weight in water • Dust-free coating imparts a very soft fiber hand, advantageous to cable, rope, and other textile processes • Patented technology incorporates super absorbent polymer (SAP) suspended in a proprietary resin matrix • Used in the production of ‘dry-dry’ telecommunications, electromechanical, seismic, umbilical and power cables • Can absorb up to 100x its weight in water • Creates a stable gel when exposed to water • Functionally replaces flooding compounds, filling gels, spun SAF yarns, and water blocking tapes • Enables faster, more economical and robust cable manufacturing • Increases durability and abrasion resistance by encapsulating filaments in the fiber bundle • Extends the life of the product by reducing the effects of friction and yarn on yarn abrasion • Protects the fiber from degradation and filamentation • Ideal for high abrasion and high friction applications in a range of fiber constructions and environments • Wicking refers to the tendency of a yarn or other fiber to draw moisture into filaments via capillary action • Coatings designed to prevent moisture from wicking within and between fibers and strands • Protects Wire or Optical Fiber from damaging effects of moisture, which can cause a drop in signal and attenuation • Hydrophobic additives used to promote and enhance water repellancy in industrial applications • Creates a waterproof barrier that prevents moisture from further migration • Applied at various % levels to optimize for water-proof ratings • Designed to inhibit or slow the spread of fire/flame • Coupled to fibers with inherent flame and thermal resistance to boost performance • Added to fibers with weak flame resistance to improve burn rating SUITABLE FIBERS • Kevlar® Para-Aramid • Nomex® Meta-Aramid • Vectran® LCP • Zylon® PBO • Technora® Fiber • Carbon Fiber • Kevlar® Para-Aramid • Nomex® Meta-Aramid • Vectran® LCP • PET Polyester • Fiberglass • UHMWPE • Kevlar® Para-Aramid • Nomex® Meta-Aramid • Carbon Fiber • Graphite Fiber • Fiberglass • PTFE Fiber • Kevlar® Para-Aramid • Vectran® LCP • Zylon® PBO • Technora® Fiber • Kevlar® Para-Aramid • Vectran® LCP • Zylon® PBO • PET Polyester (All shrinks) • UHMWPE • Kevlar® Para-Aramid • Vectran® LCP • Zylon® PBO • Technora® Fiber • Fiberglass • PET Polyester (All shrinks) • Kevlar® Para-Aramid • Vectran® LCP • Zylon® PBO • Carbon Fiber • PET Polyester (All shrinks) • UHMWPE • Kevlar® Para-Aramid • Vectran® LCP • Zylon® PBO • Carbon Fiber • PET Polyester (All shrinks) • Fiberglass • Kevlar® Para-Aramid • Vectran® LCP • Zylon® PBO • Carbon Fiber • PET Polyester (All shrinks) • Fiberglass • Kevlar® Para-Aramid • Vectran® LCP • Zylon® PBO • PET Polyester (All shrinks) PRODUCTS • Belt & Hose Reinforcement Yarn • Strength Members • Industrial Fabric Yarn • Wire Harness Yarn • Ripcords • Strength Members • Wire Harness Yarn • Industrial Fabric Yarn • Braided compression rings and seals • Valve stem packing • Pump packing • Strength Members • Industrial Fabric Yarn • Wire Harness Yarn • Strength Members • Ripcords • Binder Yarn • Filler Yarn • Synthetic Wire Rope • Buffer Thread • Binder Yarn • Filler Yarn • Strength Members • Ripcords • FRP Rod • Ripcords • Strength Members • Synthetic Wire Rope • Industrial Fabric Yarns • Wire Harness Yarns • Ripcords • Strength Members • Binder Yarn • Industrial Fabric Yarns • Wire Harness Yarns • Ripcords • Strength Members • Binder Yarn • Industrial Fabric Yarns • Wire Harness Yarns • Industrial Fabric Yarns • Wire Harness Yarns • Strength Members Kevlar® and Nomex® are trademarks of DUPONT SAFETY & CONSTRUCTION, INC.

V9000T FIBER-LINE® WearcoatTM Vectran 560 LBs (254 KGs) 1389 FT/LB (932 M/LB) Flat/Round 1.13 mm N/A Twisted strength member treated with anti-abrasion coating.