The data is reported as average force over 2 inch (5.08mm) of pulling at speed of 2"/min (5.08mm/min). Aging B: nylon substrate conditioned (1) at room condition for 4 weeks, (2) immersion in water for 24 hours and (3) dry 12 hour at room condition before TPE overmolding. Aging C: nylon substrate conditioned (1) at room condition for 4 weeks, (2) immersion in water for 24 hours and (3) dry with tissue paper immediately before TPE overmolding.

Screw Speed Low–moderate Injection Velocity 1–3 inch per second Back Pressure Low–moderate Pack Pressure 60–80% of max injection pressure Hold Pressure 40–60% of max injection pressure Cool Time 10–30 seconds (depends on part geometry and dimensional stability) Residence Time Long residence times are not advised 1.844.4AVIENT www.avient.com Copyright © 2022, Avient Corporation.

DRYING CONDITIONS ENGLISH (°F) METRIC (°C) Temperature 180°F 80°C Duration 2–4 Hours Moisture Level Allowable 0.05%–0.20% PROCESSING Screw Speed Typical screw speeds are recommended Injection Velocity 1–3 inch per second Back Pressure Lower back pressure is recommended Pack Pressure 60–80% of max injection pressure Hold Pressure 40–60% of max injection pressure Cool Time 10–30 seconds (depends on part geometry and dimensional stability) Residence Time Longer residence times are not advised 1.844.4AVIENT www.avient.com Copyright © 2021, Avient Corporation.

These unidirectional fiber-reinforced strands are then cut into 1/2 inch (12 mm) composite pellets for convenient processing into net shapes via injection molding.

KEY FEATURES • Compatible with various Fiber-Line fibers, performance-adding processes, and thermoplastic resins to meet your application needs • Tapes available up to 5 inch width via spools or cut-to-length • Rapid prototyping FIBERS FOR FIBER-LINE TAPES • Carbon fiber • Fiberglass • Kevlar® Para-Aramid • Nomex® Meta-Aramid FIBER-LINE PERFORMANCE-ADDING PROCESSES • Coating • Twisting KEY APPLICATIONS • Oil & Gas • Industrial • Aerospace Polystrand™ Thermoplastic Tape Fiber-Line™ Thermoplastic Tape

SR195 24% (143-615-24) (M)