Custom products can be formulated with recycled PP and PE. KEY CHARACTERISTICS • UL 94 V-2, V-0, 5VA ratings and elevated RTI ratings • GWFI (IEC 60695-11-10) up to 960°C • Comparative Tracking Index (CTI) PLC 0, 600V ratings • Injection molding and extrusion grades • Non-halogen grades available • Low dielectric performance with selected formulations • Good recyclability • Colorable MARKETS & APPLICATIONS Applications that require flame retardant performance including: • Transportation: Interior components, seat components, door panels, aircraft interiors, railway interiors, boat interiors • Construction & Building Materials: Cable insulation, pipes and fittings, insulation materials • Consumer – Appliance casings, housings, covers, fume hoods, battery packages, furniture • Industrial Equipment: Machine housings • Energy, Electrical & Electronic, E-Mobility: Battery frames, electrical housings, connectors • Telecommunication: Cable management • Packaging: Transportation of sensitive goods • Healthcare: Medical device housings and components PRODUCT BULLETIN MAXXAM FR FLAME RETARDANT POLYOLEFIN FORMULATIONS Non-halogenated Halogenated PP Homopolymer Copolymer Homopolymer Copolymer Unit Unfilled Glass Fiber Mineral Unfilled Glass Fiber Mineral Unfilled Glass Fiber Mineral Unfilled Glass Fiber Mineral Characteristic Talcum Talcum Talcum Talcum Reinforcement Mass-% 0 5–30 5–30 0 20–30 5-20 0 5–30 5–20 0 5–30 5–20 Colorable – ++ ++ + ++ ++ + + + + + + + Density g/cm3 0,9–1,08 1,28–1,37 0,98–1,55 0,92–1,06 1,25–1,35 0,95–1,28 0,94–1,04 1,3–1,55 1,01–1,42 0,96–1,01 0,94–1,58 0,95–1,46 Tensile Strength MPa 25–30 30–70 25–35 16–22 40–65 15–25 25-–35 30–70 25–35 20–24 20–55 -25 E-Modulus (Tensile) MPa 1600–2500 2500–8200 2500–4000 800–1200 2000–8000 1600–3000 1300–2000 3000–8900 1900–3500 1000–1400 1200–7500 1500–3000 Izod Impact 23°C notched % 2,0–4,5 3,5–7,5 2,5–4,5 5–40 2,5–18 2,5–6 2,5–4,5 3,5–6,0 3,0–7,0 4,0–40 2,5–16 2,5–10 Max.

Sustainable Development Goals • Emphasized climate change commitment o Announced 2050 operational carbon neutrality and RE100 commitment o Alignment to Science Based Targets 26Avient Corporation Enable 100% of products manufactured for packaging applications to be recyclable or reusable. Avient reflects 2021 estimated revenue of $4,750M and estimated CAPEX of $80M (excludes one-time synergy capture CAPEX of $20M) 129Avient Corporation 474 644 1,002 107 147 216 467 616 872 2014 2018 2021E R&D / Technical Marketing Sales Commercial Resources Headcount figures all Pro Forma for sale of Designed Structures and Solutions (DSS) and Performance Products and Solutions (PP&S) segments. 2021E data as of October 31, 2021. D tr ib u tio 2021 Expansion Goals With the Clariant Color business acquisition and divestment of the PP&S business, our exposure is now concentrated in less-cyclical and high-growth markets.

CHEMICAL RESISTANT TPEs ADD FUNCTIONALITY THAT BRINGS VALUE TO CONSUMERS • Chemical Resistance – Resists aggressive soaps, detergents, lotions, oils and solvents found in cosmetic, personal care and household products • Regulatory* – Compositionally compliant with certain FDA and REACH regulations • Value – Economical alternative to silicone and over-engineered medical grade TPEs • Easy to Process – Can be injection molded and overmolded right onto the substrate including PP, ABS, etc Differentiation – Add color and texture to stand out from the competition • Recyclable – TPEs are compatible with most municipal recycle streams • Global Support – Avient is a global supplier with manufacturing and technical support in Europe, Asia and North America To learn more about chemical resistant GLS TPEs for packaging, contact Avient at +1.844.4AVIENT (+1.844.428.4368).

Barrel Temperatures °F (°C) PP Mineral-Filled PP Glass-Filled PP HDPE LDPE Rear Zone 360–390 (182–200) 400–420 (204–216) 415–435 (213–224) 400–420 (204–216) 370–390 (188–199) Center Zone 370–400 (188–204) 410–430 (210–221) 425–445 (218–229) 410–430 (210–221) 380–400 (193–204) Front Zone 390–410 (200–210) 420–440 (216–227) 435–455 (224–235) 420–440 (216–227) 390–410 (199–210) Nozzle 400–425 (204–219) 415–435 (213–224) 430–450 (221–232) 430–450 (221–232) 400–425 (204–219) Melt Temperature 400–425 (204–219) 415–435 (213–224) 430–450 (221–232) 430–450 (221–232) 400 - 425 (204–219) Mold Temperature °F (°C) 60–120 (16–49) Pack & Hold Pressure 50–75% of injection pressure Injection Velocity (in/s) 1.0–3.0 Back Pressure (psi) 50–100 Screw Speed (rpm) 30–100 Drying Parameters Hours @ °F (°C) Not typically required. Drying non-halogenated materials is suggested. 2 hours @ 100 (38) Moisture Range (%) Not required Follow up by purging machine with general purpose PP • Residence time should not exceed 5 minutes for Maxxam FR products • General ventilation is suggested Shut Down • Purge the equipment with a general purpose PP • All tooling and equipment must be free of any residual Maxxam FR upon shut down • Continue generating parts made from the natural PP until clear • Wipe down tool steel with mold cleaner • When using a hot runner system, care must be taken to remove residual product from the manifold MOLD DESIGN RECOMMENDATIONS Cold Slug Wells • Place cold slug wells at the base of the sprue to capture the cold material first emerging from the nozzle • Place cold slug wells at every 90° bend in the runner system • Well depths approximately 2–3 times the diameter of the runner provide best results Draft Angle • Draft angle should be 1/2°–1° per side.

Recycled Content & Recyclability We offer color concentrates that use post-consumer recycled (PCR) polypropylene (PP) and polystyrene (PS) as carrier resin. Recyclability Assessment at CycleWorks™ Our Cycleworks™ Innovation Center specializes in testing and evaluating recycling solutions. Recycling trials taking into consideration standard recycling protocols can be run to provide a real- world recyclability evaluation.

COLOR EFFECTS SUGGESTED (please click on link below IP Components Door Trim Console Seat Back Panel Talc-Filled PP/ TPO Metallic Metallic (larger flakes - mimics paint) Granite Granite (specks) Marble Lower Pillars Quarter Trim Panel Seat Side Shield PP (unfilled) Granite Granite (specks) OnColor REC Colorants (seat shields) Marble Upper Pillar Trim Grab Handles Headliner TPO Bright Colors (grab handles) Granite (fibers - minimal pillars) Shifter Knobs TPU Metallic Laser Marking Granite Marble COLOR EFFECTS SUGGESTED (please click on link below Door Trim Pull Cup Console Cupholder Bezels Console Decorative Bezels/ Trim Rings ABS Metallic (bright chromatic colors) Metallic Marble Laser Marking (pattern on metallic) Shade Mirrors Rearview Mirror Overhead Console Bin Tray PC+ABS Marble Granite Headrest Guides HDPE Metallic Bin & Pullcup Mats Cupholders Overmolding TPE Laser Marking Marble Granite Sun Visor Vanity Frame Door Handle Bezels Switch Bezels Armrest Pullcup GF PA Metallic A/C Vent Vanes Door Handle Seat Handle Carpet Clips GF PA Metallic Granite COLOR EFFECTS SUGGESTED (please click on link below Lower Pillars Quarter Trim Panel Seat Side Shield POM Metallic Metallic Granite Bezels Lenses PMMA Translucent/Tint/Fluorescent Bezels Lenses ASA Light Diffusion Exterior Badging Exterior Mirrors ASA Metallic Laser Marking Metallic 1.844.4AVIENT www.avient.com Copyright © 2024, Avient Corporation. Solid Metal Various Shades Larger Flakes LASER MARK PATTERN on Metallic LASER MARKING GRANITE Specks GRANITE Fibers MARBLE TRANSLUCENT/ TINT/FLUORESCENT LIGHT DIFFUSION ONCOLOR™ REC POLYMER COLORANTS Color concentrate derived from recycled content such as end-of-life tires • Sustainable alternative to virgin carbon black • Retains performance characteristics of traditional carbon black • Available for multiple resins and custom solutions Visit us at avient.com

Hydrocerol™ Chemical Foaming Agents are supplied as concentrates and are added to virgin or recycled polymer during the plastic conversion process. Grades are available for polyolefins, PP, PC/ABS, ABS, PA6— filled and reinforced polymers included—and others on request. Extrusion-specific concentrates are available for most common packaging resins, including PP, PE, PS, PET, and PLA.

STARTUP & SHUTDOWN RECOMMENDATIONS Purge Compound HDPE or HIPS Recycling Recycling LubriOne up to 20% is permissible. Testing the application is highly recommended to determine the effect recycling has on the desired physical properties. Cut vent depths to: - PPA Compounds: 0.0015"–0.0025" depth and 0.250" width - PC Compounds: 0.002"–0.004" depth and 0.250" width - PSU Compounds: 0.003"–0.004" depth and 0.250" width - PES Compounds: 0.003"–0.004" depth and 0.250" width - PPS Compounds: 0.002"–0.003" depth and 0.250" width - Acetal Compounds: 0.0015" minimum depth and 0.250" width - PEEK Compounds: 0.002"–0.004" depth and 0.250" width - Nylon Compounds: 0.002" minimum depth and 0.250" width • Increase vent depth to 0.060" (1.5mm) at 0.250" (4.0mm) away from the cavity and vent to atmosphere.

STARTUP & SHUTDOWN RECOMMENDATIONS Purge Compound HDPE or HIPS Recycling Recycling Edgetek™ up to 20% is permissible. Testing the application is highly recommended to determine the effect recycling has on the desired physical properties. Cut vent depths to: - PPA Compounds: 0.0015"–0.0025" depth and 0.250" width - PC Compounds: 0.002"–0.004" depth and 0.250" width - PSU Compounds: 0.003"–0.004" depth and 0.250" width - PES Compounds: 0.003"–0.004" depth and 0.250" width - PPS Compounds: 0.002"–0.003" depth and 0.250" width - Acetal Compounds: 0.0015" minimum depth and 0.250" width - PEEK Compounds: 0.002"–0.004" depth and 0.250" width - Nylon Compounds: 0.002" minimum depth and 0.250" width • Increase vent depth to 0.060" (1.5mm) at 0.250" (4.0mm) away from the cavity and vent to atmosphere.

Recycle Solutions The scavenger in the closure can be separated from the PET during recycling and closures are 100% compatible with the closure recycle stream. This new solution also improves the aesthetics of recycled packaging in terms of haze and color, including a reduction in the yellowing effect that may occur during recycling.