Solid Metal Various Shades Larger Flakes LASER MARK PATTERN on Metallic LASER MARKING GRANITE Specks GRANITE Fibers MARBLE TRANSLUCENT/ TINT/FLUORESCENT LIGHT DIFFUSION ONCOLOR™ REC POLYMER COLORANTS Color concentrate derived from recycled content such as end-of-life tires • Sustainable alternative to virgin carbon black • Retains performance characteristics of traditional carbon black • Available for multiple resins and custom solutions Visit us at avient.com

HDPE is not recommended for purging as it can cause delamination or lead to black specks. Sink Marks Melt too hot Insufficient material volume • Increase shot size • Increase packing pressure Part geometry too thick • Reduce wall thickness • Reduce rib thickness Flash Injection pressure too high • Decrease injection pressure • Increase clamp pressure • Increase transfer position Excess material volume • Decrease pack pressure • Decrease shot size Melt and/or mold temperature too hot Loose clamp • Reset mold height • Increase clamp tonnage Shrink Too much shrink • Increase cooling time Too little shrink • Decrease cooling time Burning • Reduce decompression • Clean, widen and increase number of vents • Increase gate size to reduce shear Wet material • Verify material is dried at proper condition Nozzle Drool Nozzle temperature too hot • Decrease nozzle temperature • Decrease back pressure • Increase screw decompression • Verify material has been dried at proper conditions Incorrect nozzle • Use reverse taper tip Weld Lines Melt front temperatures are too low • Increase pack and hold pressure • Increase gate size • Identify end of fill pattern and verify proper vent location • Add vents or increase vent width • Move gate location Warp • Reduce injection speed • Increase pack pressure • Increase pack time • Increase cool time Mold design • Non-uniform mold cooling Part design • Non-uniform wall thickness Thermolator incorrect temperature • Check settings • Inspect thermocouple Sticking in Mold Overfilled cavity • Decrease injection rate and pressure • Decrease hold pressure • Decrease cooling time Part too hot • Decrease barrel temperature • Increase cooling time • Increase draft angle • Polish cores in direction of ejection Black Specks Contamination • Purge machine Degradation • Reduce melt temperature • Reduce screw speed • Reduce back pressure Machine related • Check for wear on screw, barrel or check ring Delamination • Purge barrel to eliminate material contamination • Reduce sharp corners in material flow path • Increase venting Discoloration Oversheared material • Decrease melt temperature • Reduce residence time Mold design • Increase gate sizing Dry material • Check moisture of material to ensure it is within the recommended moisture percentage for molding 1.844.4AVIENT www.avient.com Copyright © 2021, Avient Corporation.

Black Sand French Gray Laguna Emerald Irish Mist Tahoe Mauve JadeMidnight Blue Caribbean Tropical Breeze For more inspiring color ideas, call Mesa customer service at 440.930.1760 mesaconstructioncolors.com Copyright © 2020, Avient Corporation.

ColorMatrix LCX dispersions are designed to minimize and eliminate screw slip, streaking and specking, all while generating cost-to-color savings through processing efficiencies that include: • Handling efficiency – bulk distribution, individual feed stations • Inventory reduction – less inventory and required floor space • Process efficiency – improved color change times KEY CHARACTERISTICS • Highly concentrated pigment dispersions specifically for EBM processing • Provides dimensional stability by utilizing more resin instead of fillers • Reduces costs through handling and processing efficiencies • Customization available for design and product handling • Can be formulated in combination with a wide selection of additive technologies to meet performance needs MARKETS AND APPLICATIONS ColorMatrix LCX Liquid Dispersions for EBM processing are well suited for the following: • Monolayer applications • LDR less than 3% • Large volume whites and blacks • Tints 1.844.4AVIENT www.avient.com Copyright © 2021, Avient Corporation.

KEY CHARACTERISTICS • Consistently achieves 3.0 per VDA 270 • Reduces VOC and emissions • Inherent heat stabilization • Customized physical property balance • Customized process flexibility • Natural, black, & custom colors possible TYPICAL USES PolyOne has designed Maxxam LO material for use in underhood automotive HVAC applications, including: • Housings • Ducts • Fasteners/connectors • Structural brackets www.polyone.com Copyright © 2018, PolyOne Corporation.

E L E C T R I C H A I R C L I P P E R S HAIRSTYLING APPLIANCE MANUFACTURER • Regulatory – UL rated flame retardancy • High stiffness and impact resistance • Excellent surface appearance • Colorability/color matching – specific black color • Provided color matching expertise to match glass fiber reinforced formulation to specific customer requirement • Enabled customer to diversify into a new market with a new design of hair clipper for consumers • Developed material quickly - three months from brief to production Bergamid™ A700 glass reinforced flame retardant formulation KEY REQUIREMENTS WHY AVIENT?

LIGHTING MANUFACTURER S T R E E T L I G H T A R M • Limit corrosion • Replace metal insert, maintaining strength • Black color • UV resistance, as used for an outdoor application • Electrical isolation • Utilized simulation services from Avient Design to optimize the product’s design for performance and processability • Achieved required ageing test with the support from R&D and ADTS • Replaced the need to use a metal insert, reducing part weight, cost and simplifying the production process OnForce Long Glass Fiber Reinforced Polypropylene Composites KEY REQUIREMENTS WHY AVIENT?

GUÍA DE SELECCIÓN DE PRODUCTOS SOLUCIONES PARA CABLE & ALAMBRE Materiales de Ingenieria Especializada Formulaciones para aislamiento, revestimiento y cross-web para el mercado de cable y alambre Syncure™ XLPE Formulaciones de Polietileno Reticulable • Curado al ambiente • Alto desempeño a la flama • Resistente al calor, el aceite, a la deformación por stress constante y la abrasión • Propiedades de baja temperatura • Baja inversión de capital • Alta velocidad de extrusión • Libre de DBDPE disponible • Boletinados por UL/CSA Maxxam™ FR Polipropileno con Retardante de Flama • Reemplaza al FEP para aislamiento • Desempeño a la flama • Cumplimiento a UL 444 yellow card • Baja constante dieléctrica • Alta velocidad de extrusión • Capacidad de extrusión para paredes delgadas Maxxam™ SY Polipropileno Espumado • Baja constante dieléctrica • Estructura celular uniforme • Resistencia al calor y la compresión • Facilidad del espumado mediante proceso químico Soluciones LSFOH ECCOH™ Baja Emisión de Humo y Libre de Halógenos • Mejora de la seguridad contra incendios • Baja emisión de humo, toxicidad y libre de halogenos (LSFOH) • Resistencia química ECCOH™ XL Soluciones para Cable Reticulado • Libre de halógenos, baja emisión de humos, baja toxicidad y anticorrosiva • Excelentes propiedades electricas y mecanicas • Facilmente procesable • Temperaturas de operación 90°C • Tecnologia de curado por humedad Synprene™ Elastómeros Termoplásticos Retardantes de Flama • Alta desempeño a la flama • Resistencia a baja temperatura • Resistencia química • Permite coloración FireCon™ CPE Polietileno Clorado Retardante de Flama • Resistencia en ambientes extremos • Propiedades de baja temperatura • Alta desempeño a la flama • Alta velocidad de extrusión • Resistencia a la luz del sol y rayos UV ECCOH™ XL 8148 Libre de halógenos, baja emisión de humos, baja toxicidad, anticorrosivo EN50618 Syncure™ S100FH Flama horizontal UL 44 Syncure™ S100FH-XUV Flama horizontal, resistencia UV UL 44 Syncure™ S100FH-UV Flama horizontal, FV-1, resistencia UV UL 44, UL 4703 Syncure™ S100FV VW-1 UL 44 Syncure™ S100FV-UV VW-1, resistencia UV UL 44 Syncure™ S112NA Sin retardante a la flama CSA 22.2 Syncure™ S120NA Sin retardante a la flama NSF 61 Syncure™ S200FH Flama horizontal, libre de DBDPE UL 44 Syncure™ S200FV VW-1, libre de DBDPE UL 44 SISTEMAS PARA AISLAMIENTO DE CABLES DE BAJO VOLTAJE Cables de baja tensión • Desempeño a la flama • Resistencia al calor, aceite y abrasión • Buen desempeño a bajas temperaturas • Baja inversión de capital • Altas velocidades de procesamiento AISLAMIENTO Y CROSS-WEBS PARA CABLES DE CATEGORIA Los sistemas de cables de categoría nos proporcionan • Alternativas de cables FEP • Desempeño a la flama • Baja constante dieléctrica • Altas velocidades de extrusión y desempeño para pared delgada • Resistencia química • Desempeño a bajas temperaturas Maxxam™ FR 0521-48 R1 Baja emisión de humo, libre de halógenos UL 444 Maxxam™ FR 0587-21 R3 Halogenado, y desempeño para cables plenum UL 444 Cables para fibra optica • Resistencia a ambientes extremos, químicos y a la exposición a luz del sol • Resistencia a bajas temperaturas (LTB) • Baja emisión de humos y toxicidad • Flexibilidad • Altas velocidades en extrusion ECCOH™ 6649 UV Low DD Baja emisión de humos, Libre de halógenos Cubre las requerimientos de retardacia a la flama requeridos por el cliente Cables Coaxiales • Altas velocidades de extrusión • Baja constante dieléctrica • Estructura de celda uniforme • Resistencia al calor y a la deformación Maxxam™ SY 89-22-7 Espumable Cubre las requerimientos de retardacia a la flama requeridos por el cliente SISTEMAS PARA CUBIERTA PARA CABLES DE DATOS Cubiertas para medio y bajo voltaje • Resistencia a ambientes extremos, ambientes químicos y degradación por rayos UV • Resistencia a bajas temperaturas (LTB) • Baja emisión de humos y toxicidad • Flexibilidad • Altas velocidades de extrusión • Fácilmente de colorear CARACTERISTICAS MERCADOS Y APLIACIONES FireCon™ CPE 30-33 RoHS Black Retardante a la flama, flexible Edificación & construcción, FireCon™ CPE 37-36 RoHS Black Retardante a la flama, flexible Edificación & construcción, FireCon™ CPE 30-20 RoHS Natural Retardante a la flama, flexible Edificación & construcción, ECCOH™ 5549 UV Baja emisión de humos, libre de halógenos, retardante a la flama Edificación & construcción, industrial ECCOH™ 6649 UV Low DD Baja emisión de humos, libre de halógenos, retardante a la flama Fibra optica, ductos ECCOH™ 5981 UV Baja emisión de humos, libre de halógenos, retardante a la flama Cables industriales, cables Teck 90 Synprene™ RT5180 Retardante a la flama, Synprene™ RT5180UV Retardante a la flama, Synprene™ RT3870M Retardante a la flama, www.avient.com Copyright © 2023, Avient Corporation.

% Pigment Specific Gravity Color Index Lightfastness WHITE 10PEP03 Titanium Dioxide, Rutile 60 2.06 PW-6 I/O YELLOW 12PEP01 Diarylide AAOT GS 20 1.24 PY-14 I 12PEP03 Diarylide HR RS 25 1.23 PY-83 I/O (Mass) 13PEP02 Isoindolinone RS 25 1.31 PY-110 I/O 13PEP03 Benzimidazolone GS 25 1.25 PY-151 I/O (Mass) 81PEP01 Iron Oxide 60 2.07 PY-42 I/O ORANGE 15PEP03 Benzimidazolone RS 25 1.27 PO-36 I/O RED 23PEP04 Quinacridone BS 25 1.24 PV-19 I/O 23PEP06 Specialty Naphthol BS 25 1.23 PR-170 I/O (Mass) C 25PEP01 Red 2B, Ca Salt BS 17 1.26 PR-48:2 I/O (Mass) 28PEP01 Red 2B, Ba Salt YS 25 1.32 PR48:1 I/O (Mass) 82PEP01 Iron Oxide, Light YS 27 1.5 PR-101 I/O 82PEP02 Iron Oxide, Light BS 60 2.2 PR-101 I/O 82PEP04 Iron Oxide, Light VYS 60 2.2 PR-101 I/O 82PEP05 Iron Oxide, Dark VBS 60 2.21 PR-101 I/O BLUE 40PEP01 Phthalocyanine GS 25 1.27 PB-15:3 I/O 40PEP05 Phthalocyanine RS 25 1.27 PB-15 I/O 42PEP02 Ultramarine 35 1.44 PB-29 I/O 49PEP01 Cobalt 31 1.54 PB-28 I/O GREEN 50PEP01 Phthalocyanine BS 16 1.28 PG-7 I/O 50PEP03 Phthalocyanine YS 16 1.28 PG-7 I/O 59PEP02 Chromium Oxide 70 2.6 PG-17 I/O VIOLET/MAGENTA 24PEP03 Quinacridone Violet 20 1.24 PV-19 I/O 24PEP04 Ultramarine Violet 50 1.69 PV-15 I/O 24PEP05 Quinacridone Magenta 20 1.24 PR-122 I/O 24PEP06 Benzimidazolone 20 1.23 PV-32 I/O 24PEP07 Carbazole Violet 13 1.22 PV-23 I/O BROWN/TAN 83PEP01 Iron Oxide, Light 34 1.6 PBr-6 I/O 83PEP02 Iron Oxide, Dark 29 1.51 PBr-6 I/O BLACK 90PEP01 Furnace - High Jet 24 1.3 PBk-7 I/O 90PEP04 Furnace - Medium 17 1.27 PBk-7 I/O 90PEP05 Iron Oxide 33 1.58 PBk-11 I/O POLYESTER URETHANE PASTE COLORANTS (PEP) Stan-Tone Code Pigment Type Approx. % Pigment Specific Gravity Color Index Lightfastness WHITE 10ET03 Titanium Dioxide, Rutile 56 1.74 PW-6 I/O YELLOW 12ET01 Diarylide AAOT GS 40 1.15 PY-14 I 12ET03 Diarylide HR RS 20 1.07 PY-83 I/O (Mass) 13ET02 Isoindolinone RS 20 1.11 PY-110 I/O 13ET03 Benzimidazolone GS 20 1.08 PY-151 I/O (Mass) 81ET01 Iron Oxide 60 1.84 PY-42 I/O ORANGE 15ET03 Benzimidazolone RS 25 1.11 PO-36 I/O RED 20ET01 Red Lake C YS 30 1.16 PR-53 I 22ET01 Lithol Rubine BS 30 1.17 PR-57:1 I 23ET04 Quinacridone BS 15 1.05 PV-19 I/O 23ET06 Specialty Naphthol BS 30 1.09 PR-170 I/O (Mass) C 25ET01 Red 2B, Ca Salt BS 29 1.15 PR-48:2 I/O (Mass) 28ET01 Red 2B, Ba Salt YS 30 1.18 PR-48:1 I/O (Mass) 82ET01 Iron Oxide, Light BS 60 1.94 PR-101 I/O 82ET02 Iron Oxide, Dark VBS 60 1.95 PR-101 I/O 82ET04 Iron Oxide, Light VYS 60 1.94 PR-101 I/O BLUE 40ET01 Phthalocyanine GS 25 1.11 PB-15:3 I/O 40ET05 Phthalocyanine RS 20 1.09 PB-15 I/O 42ET02 Ultramarine 55 1.46 PB-29 I/O 49ET01 Cobalt 65 2.02 PB-28 I/O GREEN 50ET01 Phthalocyanine BS 30 1.2 PG-7 I/O 50ET03 Phthalocyanine YS 25 1.16 PG-7 I/O 59ET01 Chromium Oxide 65 2.12 PG-17 I/O VIOLET/MAGENTA 24ET03 Quinacridone Violet 20 1.08 PV-19 I/O 24ET04 Ultramarine Violet 60 1.66 PV-15 I/O 24ET05 Quinacridone Magenta 20 1.08 PR-122 I/O 24ET06 Benzimidazolone 25 1.08 PV-32 I/O 24ET07 Carbazole Violet 13 1.05 PV-23 I/O BROWN/TAN 83ET01 Iron Oxide, Light 64 2.02 PBr-6 I/O 83ET02 Iron Oxide, Dark 60 1.9 PBr-6 I/O BLACK 90ET04 Furnace - Medium 22 1.12 PBk-7 I/O 90ET05 Iron Oxide 60 1.9 PBk-11 I/O POLYETHER URETHANE PASTE COLORANTS (ET) PEP/ET RS = Red Shade YS = Yellow Shade VYS = Very Yellow Shade BS = Blue Shade VBS = Very Blue Shade GS = Green Shade HR = Heat-Resistant LIGHTFASTNESS I = Indoor Only I/O = Indoor or Outdoor Mass = Outdoor Masstone Application Only C = Some Caution Advised www.avient.com Copyright © 2020, Avient Corporation.

Edgetek™ PKE Glass-Filled Portfolio Polyketone formulations with 20, 30, or 40% short glass fiber reinforcement available in natural or black Complēt™ PKE Portfolio Long fiber reinforced polyketone formulations with 30, 40, or 50% fiber loading and available in natural or black, and available in non-PFAS* formulations to achieve a UL 94 V-0 flame rating at 1.5 mm ET8900-0001 20GF NAT LGF30-PKE 1088 NAT ET8900-0002 30GF NAT LGF30-PKE 2020 BLK ET8900-0003 40GF NAT LGF40-PKE 1088 NAT ET8900-0004 20GF BLK LGF40-PKE 2020 BLK ET8900-0005 30GF BLK LGF50-PKE 1088 NAT ET8900-0006 40GF BLK LGF50-PKE 2020 BLK FEATURED PRODUCTS * Non-PFAS flame-retardant (FR) grades are manufactured without intentionally added PFAS-based raw materials.