https://www.avient.com/resources/safety-data-sheets?page=1967
Gray 2
Wintersgate 2
Clay 2
https://www.avient.com/resources/safety-data-sheets?page=3480
PLATE OUT PKG 2
AOIMPE BK 2
BD GOLD 2
https://www.avient.com/resources/safety-data-sheets?page=4367
GREEN EVA 2
WHITE EVA 2
ORANGE 091-2
https://www.avient.com/resources/safety-data-sheets?page=1963
GREEN 2
PINK 2
BLUE 2
https://www.avient.com/resources/safety-data-sheets?page=2706
GREEN 2
SAND VER. 2
TRANSL PINK MIDDLE 2
https://www.avient.com/sites/default/files/2022-11/Smarter Materials High Performance Thermoplastics.pdf
Heat Deflection Temperature (HDT): Temperature at which a
polymer deforms when heated or cooled under a specified load.
2.
Using pre-colored resin, where every pellet is precisely the right color
2.
If cooling is too slow, adequate solidification
may not take place, which could result in a deformed or collapsed part.
https://www.avient.com/investor-center/news/avient-announces-fourth-quarter-and-full-year-2022-results
Great Place
Great Place
2)
https://www.avient.com/sites/default/files/resources/Universal_Polyamide_Overmold_Thermoplastic_Elastomer.pdf
The substrate
is locked in its place on a moving plate in order to maintain the 90o angle while the elastomer is
being pulled.
The data is reported as average force over 2 inch (5.08mm) of
pulling at speed of 2"/min (5.08mm/min).
As seen in Table 2, chemistry, types and aging have no
effect on bonding strength.
https://www.avient.com/resources/safety-data-sheets?page=4749
PP TRANS WHITE 2
GFPP WHITE 2
MIST HDPE 2
https://www.avient.com/resources/safety-data-sheets?page=5182
S1054A-4-2
X GT-21973-01-2
X GT-21973-02-2