These materials have been formulated using select metallic fillers and engineered thermoplastic resins to have densities similar to actual metals, while also providing the design flexibility and processing ease of conventional thermoplastics. Base Resin ABS PA PBT PC PE PEEK PP PPS Barrel Temperatures °F (°C) Rear Zone 400–475 (200–250) 480–540 (248–282) 480–520 (250–270) 480–570 (250–300) 400–445 (200–230) 660–700 (350–475) 400–440 (200–225) 520–600 (270–300) Center Zone 410–480 (205–253) 490–550 (254–287) 485–525 (251–273) 500–580 (260–305) 410–455 (207–237) 670–710 (357–385) 410–450 (205–230) 550–610 (285–310) Front Zone 420–490 (210–257) 500–560 (260–293) 490–530 (254–276) 515–590 (267–310) 420–465 (213–243) 680–720 (363–400) 420–455 (215–235) 570–620 (300–320) Nozzle 425–500 (215–260) 510–570 (265–298) 490–540 (254–282) 530–600 (275–315) 430–475 (220–250) 700–730 (370–395) 430–460 (220–240) 610–620 (320–325) Melt Temperature 425–515 (215–270) 510–570 (265–298) 490–540 (254–282) 530–615 (275–325) 430–495 (220–260) 700–725 (370–385) 430–475 (220–250) 610–635 (320–335) Mold Temperature 140–200 (60–90) 150–300 (65–148) 140–280 (60–137) 160–240 (70–115) 80–140 (25–60) 300–400 (150–200) 80–140 (25–60) 190–300 (90–150) Drying Parameters 190 (90) 2–4 Hours 0.01%–0.15% 180 (82) 4–5 Hours 0.10%–0.20% 275 (135) 3–4 Hours 0.02%–0.04% 250 (125) 3–4 Hours 0.02% 160 (70) 2 Hours 300 (150) 3–4 Hours 0.10% 160 (70) 2 Hours 280 (135) 2–3 Hours 0.01%–0.20% Nozzle Type General Purpose Nylon or Reverse Taper General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose Injection Velocity1 2–5 in/sec; 50–127 mm/sec Injection Pressure Medium to high (may range from 1,000–4,000 psi; 7-28 Mpa) Back Pressure 50–100 psi; 0.3–0.7 Mpa Screw Speed 25–75 RPM Cushion 0.125–0.250 in; 3–6 mm Screw Compression Ratio2 2.0:1–2.5:1 Processing Guide 3 Base Resin ABS PA PBT PC PE PEEK PP PPS Barrel Temperatures °F (°C) Rear Zone 400–475 (200–250) 480–540 (248–282) 480–520 (250–270) 480–570 (250–300) 400–445 (200–230) 660–700 (350–475) 400–440 (200–225) 520–600 (270–300) Center Zone 410–480 (205–253) 490–550 (254–287) 485–525 (251–273) 500–580 (260–305) 410–455 (207–237) 670–710 (357–385) 410–450 (205–230) 550–610 (285–310) Front Zone 420–490 (210–257) 500–560 (260–293) 490–530 (254–276) 515–590 (267–310) 420–465 (213–243) 680–720 (363–400) 420–455 (215–235) 570–620 (300–320) Nozzle 425–500 (215–260) 510–570 (265–298) 490–540 (254–282) 530–600 (275–315) 430–475 (220–250) 700–730 (370–395) 430–460 (220–240) 610–620 (320–325) Melt Temperature 425–515 (215–270) 510–570 (265–298) 490–540 (254–282) 530–615 (275–325) 430–495 (220–260) 700–725 (370–385) 430–475 (220–250) 610–635 (320–335) Mold Temperature 140–200 (60–90) 150–300 (65–148) 140–280 (60–137) 160–240 (70–115) 80–140 (25–60) 300–400 (150–200) 80–140 (25–60) 190–300 (90–150) Drying Parameters 190 (90) 2–4 Hours 0.01%–0.15% 180 (82) 4–5 Hours 0.10%–0.20% 275 (135) 3–4 Hours 0.02%–0.04% 250 (125) 3–4 Hours 0.02% 160 (70) 2 Hours 300 (150) 3–4 Hours 0.10% 160 (70) 2 Hours 280 (135) 2–3 Hours 0.01%–0.20% Nozzle Type General Purpose Nylon or Reverse Taper General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose Injection Velocity1 2–5 in/sec; 50–127 mm/sec Injection Pressure Medium to high (may range from 1,000–4,000 psi; 7-28 Mpa) Back Pressure 50–100 psi; 0.3–0.7 Mpa Screw Speed 25–75 RPM Cushion 0.125–0.250 in; 3–6 mm Screw Compression Ratio2 2.0:1–2.5:1 Comments 1.

• Custom sizes, profiles, tooling design and prototyping available for specific applications USES AND APPLICATIONS Transportation - Automotive chassis, automotive body panels, marine stringer systems, floor strengthening and stability reinforcement Consumer - Watersports paddles, sporting goods sticks, tent poles, fishing rods, archery bow limbs and arrow shafts, bicycle frames, sail battens Infrastructure & Construction - Bridge support and retrofitting repair, support beams, concrete reinforcement Healthcare - Orthopedic external fixators Energy - Wind turbine blades and stiffeners PRODUCT BULLETIN Property CFRP Barstock, Laminates & Pultruded Profiles Resin Epoxy, Vinyl ester Tensile Strength 400–500 ksi 2758–3447 MPa Flexural Strength 130–350 ksi 896–2413 MPa Flexural Modulus 18–22 msi 124–152 GPa Glass Transition Temperature 149–320 °F 65–160 °C Density 0.056–0.060 lb/in3 1.54–1.65 g/cm3 TECHNICAL PROPERTIES (Typical Values) 1.844.4AVIENT www.avient.com Copyright © 2021, Avient Corporation.

Graft resin cannot be dried, has a 6 month shelf life when stored unopened in a cool dry location and must be consumed after opening.

Together, the collaborative team evaluated various Gordon Composites™ spring materials and configurations, trialing different lengths, thicknesses and fiberglass-to-resin ratios to achieve the required properties.

These concentrates contain a very high pigment load, allowing low addition rates (one percent or lower) and reduce color variation from one resin type to another.

KEY CHARACTERISTICS • Available for polyethylene, polypropylene, ABS, polycarbonate and styrenics • Bio-content of resin carrier varies from 70% to 100% depending on polymer—calculated to ASTM D6866 standard • Manufactured at four ISO 13485 certified sites, providing global consistency and security of supply • Documented change control beyond CAS number, reducing risk of change • Drop-in solutions that can be processed like fossil-based grades on common injection molding and extrusion machines • Can be provided as ready-to-use pre-colored or additive formulation REGULATORY SUPPORT • Raw materials tested to: - ISO 10993-1 - USP and (incl. class VI) - European Pharmacopeia, monograph 3.1.3/ 3.1.5 (polyolefin packaging materials) - USP (polyethylene) - Elemental impurities as per ICH Q3D • Registered Drug Master File (Type III) and/or Device Master File • Food contact according to US FDA and APPLICATION BULLETIN Sustainability Spotlight Bio-polymers Healthcare use limitations apply—see below.

KEY BENEFITS • Consistent performance with all levels of rPET; 25%, 50% and 100% • Improved haze and color • Can be used with many different resin/grades • Non-nylon based • Simple to use with existing mono-layer equipment • Suitable for use on multi-layer machines Sustainability Spotlight Recycle Solutions TARGET MARKET & APPLICATIONS PET and rPET rigid packaging for food & beverage REGULATORY ColorMatrix Amosorb 4020R meets direct food contact regulatory requirements in major markets.

This literature shall NOT operate as permission, recommendation, or inducement to practice any patented invention without permission of the patent owner. 1.844.4AVIENT www.avient.com ADDITIVE TECHNOLOGIES Flame retardant additives Mitigates fire hazard by reducing flame spread and heat release Anti-static and conductive additives Controls build-up of static charges to reduce risk of fire and enhance safety Antimicrobial technology Reduces bacterial, mold and fungal growth on the surface and through the thickness of the part Light spectrum management Provides UV protection to prevent discoloration or degradation of mechanical properties for lasting outdoor durability and color fastness Scratch and mar resistant additives Adds protection to stand up to surface abrasion and wear and tear COLORANT TECHNOLOGIES UL 94 colorants Over 2,000 UL 94-recognized color concentrates, including for high temperature resins Special effect colorants Visual enhancements including metallic, granite, or pearlescent appearance Bio colorants and additives For use in bio-based plastics without compromising performance TECHNOLOGIES AVAILABLE TO ENHANCE PUBLIC CHARGING STATIONS Avient supports all of these solutions with a range of world-class services, including: • Polymer material expertise with a focus on sustainability • Application development expertise with global design centers • Regulatory compliance coordination to help mitigate risk • Reliable field technical services and support • Leading color trend and design services

KEY CHARACTERISTICS • Excellent lot-to-lot and within-lot consistency for high-quality homogeneous black shades • Easy processing and support of a long-lasting spin pack lifetime • Fastness properties and specification tolerances on par with high-end products on the market • Standard and bluish undertones available in high pigment loadings for an efficient and competitive coloration package • Can be combined with additives into a single combination concentrate for convenience • Compliance with global, regional, and local standards and regulations* RECOMMENDED USE • In most cases, the concentrate is added directly to the resin using gravimetric or volumetric dosing units; for some processes, the concentrate can be added via a side stream extruder (direct spinning) • The recommended dosages are from 3% for the typical automotive, technical, and carpet applications and up to 6% for apparel, footwear, and home textile yarns * Contact your local sales representative for more information on regulatory compliance PRODUCT BULLETIN Copyright © 2022, Avient Corporation.

Using OnCap anti-fog solutions is as simple as adding it to the resin at a production line’s feeder.