CUSTOM FORMULATION IMPROVES PRODUCTIVITY AND MANUFACTURING EFFICIENCY CASE STUDY: TRILLIANT™ HC SPECIALTY ENGINEERED MATERIALS Ch all en ge A cc ep te d. Avient determined that the manufacturer required a material with a unique combination of properties, including: • Processing ease – high flow rate, ability to fill multi-cavity molds, thin-wall capabilities • Superior toughness – strength and durability to ensure dimensional integrity of the part • Repeatable performance – consistent conductivity for accurate measurement of liquids While several off-the-shelf compounds were evaluated, a new formulation was developed to meet the manufacturer’s specific needs as well as provide signifi cant benefi ts in reduced cycle time, increased production and reduced scrap rate. THE IMPACT For the manufacturer, Trilliant™ HC specialty engineered materials provided a number of advantages that contributed to the success of the new product line: • Reduced Cycle Time: The high flow properties of the Trilliant HC formulation allowed the manufacturer to produce warp-free parts that require less packing and cooling time, resulting in a 40% cycle time reduction

These DBDPE-free grades satisfy regulatory and performance demands by using an alternative flame retardant while maintaining UL 44 compliance and comparable performance to traditional Syncure XLPE materials. The development of these high-performing materials grants wire and cable producers the flexibility to adapt to evolving regulations in the market. Processing conditions can cause material properties to shift from the values stated in the information.

Precauciones: el extrusor no debe dejarse en reposo con el material en el barril. EXTRUSOR Tornillo 1½" to 6" para polietileno—Maddock; relación de compresión 3:1 Cabezal De presión Dado Del tamaño adecuado para una hilera de 1/8" o menos L/D 24:1 o superior Paquete de mallas Malla de 20/60/60/20 Canal de enfriamiento 50–65°C Alimentador Gravimétrico—3 compartimentos (para el color) Condiciones de secado, solo para catalizador Desecante, 4 horas a 60°C PROCESAMIENTO Temperatura Precalentamiento del alambre 110–120°C Zonas de alimentación 165°C Transición 170°C Dosificación 177°C Cabezal/dado 182°C Material fundido 177–190°C Llama a la punta del salida del dado Sí Velocidad de la línea La velocidad superior de la línea mejora mezclado de los dos compuestos y apariencia superficial del dislamiento de la superficie Compuesto de purga HDPE www.avient.com Copyright © 2020, Avient Corporation. Processing conditions can cause material properties to shift from the values stated in the information.

Cesa™ Flame Retardant Additives PTFE-free and Non-halogen for Polycarbonate Polycarbonate is a material of choice for E&E products as it provides very good impact strength, dimensional stability, and heat resistance.Some applications require the use of flame-retardant solutions to increase safety and ensure compliance with fire hazard standards. They also offer the ability for producers seeking more flexibility in managing plastic material inventory to store large quantities of virgin or recycled resin and order flame-retardant concentrates as needed for individual projects. Processing conditions can cause material properties to shift from the values stated in the information.

This laser enhancement additive works by converting visible, UV or IR laser light energy into thermal energy, creating surface marks that contrast the color of resin material. Avient has a track record of successfully collaborating with customers in developing solutions for a wide variety of applications, materials and processes. Processing conditions can cause material properties to shift from the values stated in the information.

Processing conditions can cause material properties to shift from the values stated in the information. MATERIAL PROPERTY SILCOSPERSE FR 107443 SILCOSPERSE FR HS 107449 SILCOSPERSE FR HS-B 107453 Silicone X X X Ceramifier Material ceramifies, it doesn’t char.

Thanks to a unique combination of multi-additives in the masterbatch formulation, Cesa Anti-fog Plus materials allow good fog clearance before and after lamination, provide quick performance in both hot and cold conditions. Processing conditions can cause material properties to shift from the values stated in the information. MARKETS AND APPLICATIONS Cesa Anti-fog Plus additives are formulated for use in transparent packaging of chilled fresh foods such as: • Fruit • Vegetables • Meat • Fresh fish • Ready-to-cook-food and ready-to-eat meals These anti-fog plus materials can be incorporated into mono and multi-layer films such as: • Lidding barrier film on rigid or semi-rigid containers • Stretch film • Shrink film

APPLICATIONS • Medical devices • Drug delivery devices • Labware KEY CHARACTERISTICS • Manufactured at four ISO 13485 certified sites, providing global consistency and increased security of supply • Documented change control beyond CAS number level, reducing risk of change REGULATORY SUPPORT • Raw materials tested to: - ISO 10993-1 and USP biological evaluation - European Pharmacopeia 3.1.3/3.1.5 (polyolefin) - USP (polyethylene) - ICH Q3D elemental impurities • Registered Drug Master File (Type III) and/or Device Master File • Food contact established with FDA/EU* * FDA/EU compliance information available upon request Copyright © 2023, Avient Corporation. Processing conditions can cause material properties to shift from the values stated in the information. It is the responsibility of the medical device manufacturer and the person placing the medical device on the market to ensure compliance of the medical device with all applicable laws and regulations, including the suitability of all raw materials and components used for its manufacture.

It can also be recycled as thermoplastic material. KEY CHARACTERISTICS • High initial adhesion on steel, PMMA, and various other substrates • Stable and low adhesion build-up over time to prevent residue • Low unwinding force for improved efficiency when pasting film • Good gel control • One-step extrusion processing to improve manufacturing efficiency • Reduced VOC emissions compared to current solvent-based coating technology • Can be recycled as a thermoplastic material APPLICATIONS The low adhesion build-up performance of Versaflex CF 6668 TPE makes it ideal for use in protective films for high-end applications including: • Appliance • Household furniture • Building & construction • Automotive PRODUCT BULLETIN www.avient.com Copyright © 2021, Avient Corporation. Processing conditions can cause material properties to shift from the values stated in the information.

Available in masterbatch solutions, these beautiful effects are formulated with: • organic waste materials, such as almond shells • glitter flakes • synthetic fibers • special effects, such as speckles and pearlescents KEY CHARACTERISTICS • Available in standard or custom finishes • Cost effective replacement for marble, granite, and other expensive and heavy materials across many applications • No additional production investment required MARKETS AND APPLICATIONS Shades of Nature colorants can add depth and dimension to: • Packaging – including premium cosmetics or luxury caps and closures • Transportation – interior or exterior automotive trim and components • Consumer goods – toys, outdoor goods, furniture • Small and large household appliances PRODUCT BULLETIN NAME COLOR TONE EFFECTS EU FDA TOYS T STABILITY Fossil Beige Fibers/Speckles YES NO YES 280°C Lavender Purple Blue Fibers YES NO YES 280°C Rosewood Light Pink Fibers NO NO NO 280°C Emerald Creek Green Special Effects YES YES YES 280°C Mother of Pearl White Pearl Special Effects YES YES YES 280°C Invigorate Yellow Green Natural Waste NO NO YES < 210°C Interstellar Brown Special Effects YES YES YES 280°C Unrefined Grey Glitter NO NO NO 230°C Reflection Blue Glitter NO NO NO 230°C Coral Sand Orange Fibers NO NO NO 280°C REGULATORY INFORMATION IMPORTANT NOTE The above technical and regulatory information is based on the formulation of the current 10 colors in the palette. Processing conditions can cause material properties to shift from the values stated in the information.