It enables: • Increased rPET content • Reduced CO 2 emissions When added to PET preforms and bottles, ColorMatrix AAzure helps to: • Improve bottle quality - Reduced preform acetaldehyde by up to 80% - Improved mechanical strength - Lightweighting • Improve processability - Reduced bottle blowouts - Reduced scrap - Improved productivity • Reduce energy consumption during bottle blowing process ColorMatrix AAzure has a slight blue tint, which is useful for off-setting yellowing often associated with the use of rPET, and has minimal impact on final product color or aesthetics.

RAL 3015 - Afnor A-870 BS/IEC 304 (Dark Grey) RAL 6024 - Afnor A-460 Afnor A-571 (Light Blue) RAL 4005 - Afnor A-730 RAL 7035 - BS/IEC 304 (Light Grey) RAL 2004 - BS/IEC 304 RAL 8002 - BS/IEC 304 RAL 6016 - Afnor A-445 RAL 6027 - BS/IEC 304 RAL 7032 RAL 1021 - BS/IEC 304 Afnor A-330 RAL 5015 - BS/IEC 304 RAL 7000 - Afnor A-625 RAL 2003 RAL 6018 - BS/IEC 304 RAL 9005 - BS/IEC 304 Afnor A-603 RAL 9010 - BS/IEC 304 Afnor A-665 RAL 8003 RAL 3000 - BS/IEC 304 Afnor A-805 The following colors are available in all ranges with short-term delivery.

Figure 1: Tensile test data as a function of the fibre orientation 0° (orange), 45° (green), 90° (blue) https://www.hexagonmi.com Figure 4: Failure location in the flexural test for the isotropic modelling Figure 6: Failure location in the tensile test for the isotropic modelling approach (left), Digimat anisotropic modelling approach (middle) and reality (right) Figure 3: Flexural test results with the isotropic modelling approach (orange) and Digimat anisotropic modelling approach (green) Figure 5: Tensile test results with the isotropic modelling approach (orange) and Digimat anisotropic modelling approach (green) Figure 5 shows the tensile test results with, again, a convincing advantage for the Digimat anisotropic modelling approach against the isotropic modelling approach.

STANDARD BARSTOCK PRODUCTS PRODUCT MATERIAL DESCRIPTION COLOR MAX THICKNESS IN (MM) MAX WIDTH IN (CM) FLEXURAL MODULUS Msi (GPa) FLEXURAL STRENGTH ksi (MPa) GLASS % GC-67-UB Glass/Epoxy Black 0.575 (14.6) 11.75 (29.8) 5.8 (39.99) 153 (1055) 67 GC-67-UBZ Glass/Epoxy Black 0.5 (12.7) 8.75 (22.2) 5.8 (39.99) 153 (1055) 67 GC-60-UBC Carbon/Epoxy Black 0.25 (6.35) 4.0 (10.2) 12.5 (86.19) 150 (1034) 60 GC-67-UBW Glass/Epoxy, 90° Weft Blue 0.25 (6.35) 8.75 (22.2) 4.8 (33.10) 150 (1034) 67 http://www.polyone.com/content/product-selection-help-form PULTRUDED PROFILES - TYPICAL PROPERTIES The Glasforms™ pultrusion process creates continuous, constant cross-sectional profiles with consistent, uniform quality and exceptional mechanical performance.

Figure 1: Tensile test data as a function of the fibre orientation 0° (orange), 45° (green), 90° (blue) https://www.hexagonmi.com Figure 4: Failure location in the flexural test for the isotropic modelling Figure 6: Failure location in the tensile test for the isotropic modelling approach (left), Digimat anisotropic modelling approach (middle) and reality (right) Figure 3: Flexural test results with the isotropic modelling approach (orange) and Digimat anisotropic modelling approach (green) Figure 5: Tensile test results with the isotropic modelling approach (orange) and Digimat anisotropic modelling approach (green) Figure 5 shows the tensile test results with, again, a convincing advantage for the Digimat anisotropic modelling approach against the isotropic modelling approach.

Level 5 7.62mm rifle lead core full metal copper jacket, military ball 2750 ft/sec 838 m/sec 1 Level 6 Level II 9mm full metal jacket with lead core 1400 ft/sec 427 m/sec 5 Level 7 5.56mm rifle full metal copper jacket with lead core 3080 ft/sec 939 m/sec 5 Level 8 Level III 7.62mm rifle lead core full metal copper jacket, military ball 2750 ft/sec 838 m/sec 5 Width Length Thickness Color LEVEL 1 GlasArmor Panels 36 in/91 cm 96 in/244 cm 0.256 in/6.5 mm Natural 36 in/91 cm 120 in/305 cm 48 in/122 cm 96 in/244 cm 48 in/122 cm 108 in/274 cm 48 in/122 cm 120 in/305 cm LEVEL 2 GlasArmor Panels 36 in/91 cm 96 in/244 cm 0.384 in/9.8 mm Natural 36 in/91 cm 120 in/305 cm 48 in/122 cm 96 in/244 cm 48 in/122 cm 108 in/274 cm 48 in/122 cm 120 in/305 cm LEVEL 3 GlasArmor Panels 36 in/91 cm 96 in/244 cm 0.500 in/12.7 mm Natural 36 in/91 cm 120 in/305 cm Natural 48 in/122 cm 96 in/244 cm Natural, Grey, White, Tan 48 in/122 cm 108 in/274 cm Natural, Grey 48 in/122 cm 120 in/305 cm Natural, Grey, White ThermoBallistic Panels 24 in/61 cm 96 in/244 cm 0.44 in/11.2 mm White, Grey, Blue 24 in/61 cm 144 in/366 cm 48 in/122 cm 96 in/244 cm 48 in/122 cm 144 in/366 cm BALLISTIC PANEL SELECTION GUIDE Customized panel sizes and colors available.

Black, blue and clear are popular options, but there is almost no limitation on color when it comes to using TPEs.

• Abrasion resistance • High performance for consumer electronics applications MATERIAL DESCRIPTION HARDNESS COLOR OVERMOLD SUBSTRATE DENSITY (g/cm3) PROPERTY KEY CHARACTERISTIC Versaflex™ CE 3120-65 65A Natural/ Black PC, ABS, Copolyester 1.15 Soft touch, silky feel and good abrasion performance Silky feeling Versaflex™ CE 3130-70 70A Natural PC, ABS, Copolyester 1.04 Silky feel, long-term life, excellent abrasion resistance, performed UV and stain resistance, chemical resistance Non-blooming Versaflex™ CE 3130-80 80A Natural PC, ABS, Copolyester 1.08 Silky feel, good abrasion performance and UV resistance Non-blooming Versaflex™ CE 3320-70 70A Clear PC, ABS, Copolyester 1.08 Excellent UV resistance, blue jean stain resistance Super UV resistance, blue jean resistance Versaflex™ CE 3320-80 80A Clear PC, ABS, Copolyester 1.15 Excellent UV resistance, blue jean stain resistance Excellent UV resistance Versaflex™ CE 3140-65 65A Natural PC, ABS, Copolyester 1.00 Excellent abrasion resistance, chemical resistance, silky feel 5G transparent Versaflex™ CE 3140-90 90A Natural PC, ABS, Copolyester 1.01 Excellent abrasion resistance, chemical resistance, silky feel 5G transparent VIBRATION DAMPING ELASTOMERS MATERIAL DESCRIPTION HARDNESS COLOR OVERMOLD SUBSTRATE DENSITY (g/cm3) Versaflex™ VDT 4201-35N 35A Natural PP 1.00 Versaflex™ VDT 4202-40B 40A Black PP 1.00 Versaflex™ VDT 5120-40 40A Natural Nylon 1.09 Versaflex™ XP 5130 -65 65A Natural PC/ABS 1.03 Versaflex™ CE 3310-80 80A Clear PC/ABS 1.15 Thermoplastic elastomers that dampen vibrations via energy transfer • Excellent vibration damping performance (reduce noise/shaking) • Adhesion to various plastics PC, PC/ABS, ABS, PP • Colorable and translucent grades available • Effective in thin films HEALTHCARE TPEs Avient has performance-grade materials that are compliant with USP VI, ISO 10993-4 and 10993-5.

Figure 18 shows how Versaflex™ CE 3320-70 TPE resists staining from rubbing against blue jean material containing dye . Figure 18: Blue jean stain resistance testing UTILIZING ENGINEERING SIMULATIONS Engineering simulations with advanced computer software can be used to evaluate a variety of product performance criteria and address important questions related to ergonomic design .

Also, the natural color for high-performance thermoplastics is yellow or brown, which makes achieving blues and grays much harder.