PP, PE, PS, PVC No Good Foam PP Better, larger cells with lower cell density in standard IM processes; suitable for cell nucleation in structural foam processing PP, PE, PS, PVC Yes Better FA-110 Best cell structure with higher cell density; provides better structural integrity and lower density in standard IM processes PP, PE, PS, PVC Yes Best KEY CHARACTERISTICS Excelite IM formulations provide injection molders with: • Material density and weight reduction • High concentration of active CFA • Improved distribution of CFA into polymer matrix • High cell density with tight cell structure • Control over consistency and accuracy • Reduced sink marks • Ability to improve flow of material • Cycle time reduction • Improved dimensional stability • Improved thermal insulation EXCELITE IM – PRODUCT FORMULATIONS www.avient.com Copyright © 2020, Avient Corporation.

STRUCTURE MATERIAL TECHNIQUE FUNCTION S (Spunbond) outer layer PP Nonwoven Spunbond Waterproof, prevents droplets from sticking M (Meltblown) middle layer PP Nonwoven Meltblown Filtration of microbes, particles and droplets in the air S (Spunbond) outer layer PP Nonwoven Spunbond Water absorption, absorbs water vapor from breath Copyright © 2023, Avient Corporation.

KEY CHARACTERISTICS • Negative, neutral, or low PCF • Available in 60 and 80 Shore A • Performs like traditional TPEs • Naturally opaque and easy to color • Suitable to injection mold, or overmold onto PP and PE MARKETS & APPLICATIONS The portfolio of reSound ultra-low carbon footprint TPEs is ideal for brand owners and manufacturers who prefer to use a more sustainable material in personal care, household appliance, consumer electronics, and consumer packaging applications. PRODUCT BULLETIN reSound RS0200-9001 80 reSound RS0200-9001 60 Manufacturing Plant Location Gaggenau McHenry Suzhou Gaggenau McHenry Suzhou Cradle-to-Gate PCF* -0.46 -0.40 -0.40 -0.09 -0.03 -0.02 Hardness, Shore A 80 60 Overmold Substrate PP, PE PP, PE TECHNICAL PROPERTIES COMPARISON TO ALTERNATIVES Greenhouse gas (GHG) emissions from cradle-to-gate production 1.844.4AVIENT www.avient.com Copyright © 2022, Avient Corporation.

POLYSTRAND CONTINUOUS FIBER REINFORCED THERMOPLASTIC TAPES & LAMINATES ™ PRODUCT SELECTION GUIDE Material Min Finished Slit Width Max Finished Slit Width Unidirectional Tape 2” (50.8 mm) 24” (610 mm) X-Ply™, 3-Ply, 4-Ply 2” (50.8 mm) 120” (3048 mm) SLITTING CAPABILITIES Max Unfinished Width Max Finished Slit Width Max Finished Roll Weight Max Roll Length (X-Ply™, Full Width) Up to 125" (3175 mm) Up to 120" (3048 mm) Up to 10,000 lbs (4500 kg) Up to 4,000 ft (1200 m) LAMINATION LINE CAPABILITIES Tape Width Resin Capabilities Fiber Inputs Max Tape Roll Weight Max Roll Length 25" (635 mm) Standard Width, Slit Capabilities PP, PE, PETG, aPET, PA6 Additional polymers in development E-Glass S-Glass, Aramid Up to 1,800 lbs (816 kg) Up to 12,000 ft (366 m) TAPE LINE CAPABILITIES Product Name Resin Fiber Content Areal Weight Nominal Thickness1 Flexural Modulus Flexural Strength Tensile Modulus Tensile Strength wt % lb/ft2 oz/yd2 gsm in mm ksi GPa ksi MPa ksi GPa ksi MPa 6337 PP 63 0.10 14.75 500 0.015 0.38 3570 24.6 58 402 4010 27.6 111 765 6531 65 0.05 7.40 251 0.006 0.15 4020 27.7 73 505 4900 33.8 140 965 6536 0.07 10.32 350 0.009 0.23 4050 27.9 72 494 4500 31.0 131 903 6538 0.14 19.77 670 0.019 0.48 3540 24.4 47 324 4260 29.4 100 689 7034B PP-Black 70 0.07 10.24 347 0.009 0.23 4400 30.3 83 569 5000 34.5 111 765 6020 PE 60 0.08 11.95 405 0.012 0.30 3600 24.8 54 372 3800 26.2 109 752 6621 66 0.10 13.97 474 0.012 0.30 4000 27.6 55 379 4720 32.5 126 869 68222 68 0.16 23.34 791 0.022 0.56 4060 28.0 55 379 4560 31.4 113 779 5843 PETG 58 0.08 11.85 402 0.008 0.20 3680 25.4 90 621 4400 30.3 137 945 5840B aPET-Black 58 0.09 13.00 441 0.009 0.23 4120 28.4 107 738 5080 35.0 150 1034 5860B PA6-Black 58 0.08 11.48 389 0.010 0.25 3620 25.0 104 717 3970 27.4 108 745 TYPICAL PROPERTIES - UNIDIRECTIONAL FIBERGLASS REINFORCED THERMOPLASTIC TAPE 1 Nominal thicknesses indicated are baseline values that may vary depending on material processing and other variables. TYPICAL PROPERTIES - MULTI-AXIAL LAMINATES 0° Testing Orientation 90° Testing Orientation Product Name Resin Fiber Content Laminate Layers & Orientation Areal Weight Nominal Thickness1 Flexural Modulus Flexural Strength Tensile Modulus Tensile Strength Flexural Modulus Flexural Strength Tensile Modulus Tensile Strength wt % lb/ft2 oz/yd2 gsm in mm ksi GPa ksi MPa ksi GPa ksi MPa ksi GPa ksi MPa ksi GPa ksi MPa 6337 PP 63 0/90 0.20 29.49 1000 0.031 0.79 - - - - 2020 13.9 59.7 412 - - - - 2020 13.9 59.7 412 0/90/0 0.31 44.24 1500 0.045 1.14 2250 15.5 46.4 320 3070 21.2 79.4 547 186 1.3 9.7 67 1330 9.2 39.6 273 0/90/90/0 0.41 58.98 2000 0.057 1.45 2000 13.8 44.0 303 2400 16.5 60.6 418 496 3.4 20.7 143 2210 15.2 56.4 389 6531 65 0/90 0.10 14.80 502 0.014 0.36 - - - - 2240 15.4 60.9 420 - - - - 2240 15.4 60.9 420 0/90/0 0.15 22.20 753 0.020 0.50 2650 18.3 58.3 402 3100 21.4 82.8 571 280 1.9 NB2 NB2 1670 11.5 42.5 293 0/90/90/0 0.21 29.61 1004 0.027 0.68 2260 15.6 51.5 355 2470 17.0 62.2 429 580 4.0 30.4 210 2310 15.9 59.6 411 6536 0/90 0.14 20.71 702 0.021 0.53 - - - - 1980 13.7 60.5 417 - - - - 1980 13.7 60.5 417 0/90/0 0.22 31.06 1053 0.029 0.74 2309 15.9 48.3 333 2730 18.8 81.5 562 245 1.7 13.0 90 1490 10.3 44.3 305 0/90/90/0 0.29 41.41 1404 0.037 0.94 2164 14.9 47 324 2170 15.0 59.6 411 512 3.5 25.4 175 2340 16.1 71.2 491 6538 0/90 0.27 39.54 1341 0.034 0.86 - - - - 2220 15.3 60.0 414 - - - - 2220 15.3 60.0 414 0/90/0 0.41 59.53 2018 0.057 1.44 2825 19.5 40.9 282 2780 19.2 67.6 466 218 1.5 10.2 70 1410 9.7 40.0 276 0/90/90/0 0.55 79.37 2691 0.073 1.85 1880 13.0 32.4 223 2060 14.2 54.0 372 478 3.3 18.0 124 2360 16.3 61.0 421 7034B PP-Black 70 0/90 0.14 20.48 694 0.016 0.40 - - - - 2680 18.5 62.0 427 - - - - 2680 18.5 62.0 427 0/90/0 0.21 30.72 1041 0.028 0.71 1750 12.1 55.9 385 3710 25.6 75.1 518 160 1.1 11.3 78 1440 9.9 36.2 250 0/90/90/0 0.28 40.95 1388 0.036 0.90 1700 11.7 40.4 279 2800 19.3 55.7 384 432 3.0 25.4 175 2350 16.2 52.4 361 6020 PE 60 0/90 0.17 23.90 810 0.023 0.57 - - - - 1830 12.6 52.00 359 - - - - 1830 12.6 52.0 359 0/90/0 0.25 35.86 1216 0.033 0.84 2265 15.6 40.0 276 2740 18.9 68.2 470 181 1.2 10.0 69 1350 9.3 35.3 243 0/90/90/0 0.33 47.81 1621 0.044 1.12 1810 12.5 30.0 207 2000 13.8 48.0 331 502 3.5 22.0 152 1820 12.5 46.0 317 6621 66 0/90 0.19 27.94 947 0.025 0.65 - - - - 2280 15.7 60.0 414 - - - - 2280 15.7 60.0 414 0/90/0 0.29 41.90 1421 0.040 1.01 2490 17.2 37.0 255 2900 20.0 70.0 483 165 1.1 9.7 67 1440 9.9 38.0 262 0/90/90/0 0.39 55.87 1894 0.053 1.35 1810 12.5 29.0 200 2160 14.9 58.0 400 508 3.5 21.0 145 2170 15.0 53.0 365 5843 PETG 58 0/90 0.16 23.70 804 0.020 0.50 - - - - 2050 14.1 59.6 411 - - - - 2050 14.1 59.6 411 0/90/0 0.25 35.55 1205 0.030 0.76 2800 19.3 89.0 614 2900 20.0 78.0 538 397 2.7 NB2 NB2 1580 10.9 42.5 293 0/90/90/0 0.33 47.40 1607 0.039 0.99 2540 17.5 72.0 496 2300 15.9 57.7 398 780 5.4 35.0 241 2170 15.0 63.0 434 5840B aPET-Black 58 0/90 0.18 26.01 882 0.021 0.53 - - - - 2530 17.4 55.3 381 - - - - 2530 17.4 55.3 381 0/90/0 0.27 39.01 1323 0.032 0.82 2986 20.6 91.1 628 3160 21.8 68.7 474 252 1.7 20.0 138 1580 10.9 36.9 254 0/90/90/0 0.36 52.01 1763 0.042 1.07 3065 21.1 73.1 504 2570 17.7 54.2 374 813 5.6 37.0 255 2440 16.8 55.6 383 5860B PA6-Black 58 0/90 0.16 22.95 778 0.021 0.52 - - - - 2190 15.1 56.00 386 - - - - 2190 15.1 56.0 386 0/90/0 0.24 34.43 1167 0.034 0.86 2510 17.3 117.0 807 2760 19.0 63.7 439 657 4.5 22.2 153 1630 11.2 39.7 274 0/90/90/0 0.32 45.91 1556 0.046 1.18 2210 15.2 106.0 731 2090 14.4 45.6 314 1110 7.7 50.8 350 2150 14.8 57.4 396 1 Nominal thicknesses indicated are baseline values that may vary depending on material processing and other variables.

PRODUCT BULLETIN VERSAFLEX™ GP 2810-40N AM VERSAFLEX™ CE 3120-65* AM ONFLEX™ LO 7120-45 AM Applications Personal care grips Consumer packaging Consumer electronics Charging stations HVAC seals Cup holder mats Color Natural Natural Natural Durometer, Shore A 45 66 45 Specific Gravity (kg/m3) 0.87 1.14 1.13 Tensile Strength (PSI) 650 1200 585 Elongation % 700 600 685 Modulus @ 300% |(PSI) 260 585 300 Injection Moldable Yes Yes Yes OM Substrate PP PC, ABS, PC/ABS, COPE PP TECHNICAL PROPERTIES *UL listing does not apply; testing can be completed if required by the customer Copyright © 2021, Avient Corporation.

Building on the design concept from SurfCo, Avient conducted additional R&D work to formulate a specialty thermoplastic elastomer (TPE) that could be coextruded with polypropylene (PP) film and meet the high expectations of SurfCo and surfers everywhere. The customized TPE offered excellent hydrophobic qualities and similar melt strength to PP while still maintaining its key mechanical properties.

A LIFE SCIENCE COMPANY S E R U M C O L L E C T I O N C A R T R I D G E • Excellent clarity • Good bonding and peel strength onto PP • Heat resistance • Meet sterilization needs • Easy processing • Formulated transparent Shore 50A TPE with excellent adhesion onto PP and good sealing performance • Met regulatory requirements for USP Class VI and ISO 10993-4,5 • Provided a short lead time and on-site technical service Versaflex™ CL Thermoplastic Elastomers KEY REQUIREMENTS WHY AVIENT?

母粒和预着色料可用于多种聚合物，包括PE， PP，PEBA，PC，ABS等。 ™ 在三个通过ISO 13485认证的医疗产线生产 全球统一的配方，提供全球一致性和供应链 保障 提供文件化的变更控制 原料指纹图谱和常规批次测试 多种标准颜色缩短产品开发时间 产品组合里符合标准的颜色用于： - 注射针头ISO 6009 - 眼科容器盖（美国眼科学院 / AAO - American Academy of Ophthalmology） 颜色 潘通色 参照 PE 基料 PP 基料 透明PP 基料 PEBA 基料 PC 基料 ABS 基料* — PE0M176031 PP0M176045 ** AH0M415001 NC0M176058 ** SB0M665206 102C PE1M176076 PP1M176060 PP1M176062 AH1M415002 NC1M176058 NC1M176059 SB1M664958 158C PE2M176044 PP2M176046 ** ** NC2M176044 NC2M664912 SB2M664939 199C PE3M176131 PP3M176111 PP3M176113 AH3M415002 NC3M176116 NC3M176122 SB3M665037 196C PE3M176130 PP3M176109 ** AH3M415001 NC3M176117 NC3M665052 SB3M665039 2593C PE4M176023 PP4M176036 PP4M176039 AH4M415001 NC4M176038 NC4M176044 SB4M664978 292C PE5M176155 PP5M176169 ** AH5M415003 NC5M176142 ** SB5M665402 285C PE5M176154 PP5M176171 PP5M176175 AH5M415002 NC5M176143 NC5M176146 SB5M665404 288C PE5M176153 PP5M176173 ** ** NC5M176144 ** SB5M665406 346C PE6M176128 PP6M176111 ** ** NC6M176118 ** SB6M665070 3145C PE6M176126 PP6M176115 ** ** NC6M176119 ** SB6M665068 348C PE6M176127 PP6M176113 PP6M176118 AH6M415001 NC6M176120 NC6M176121 SB6M665072 425C PE7M176066 PP7M176091 PP7M176094 ** NC7M176124 ** SB7M665297 Cool Gray 5C PE7M176067 PP7M176089 ** AH7M415001 NC7M176125 NC7M665175 SB7M665295 7502C PE8M176048 PP8M176058 ** ** NC8M176058 ** SB8M664871 463C/731C PE8M176049 PP8M176060 ** ** NC8M176059 ** SB8M664869 Black C PL9M176008 PP9M176017 ** ** NC9M176008 NC9M176009 SB9M664896 颜色可能与显示的实际颜色有所不同。 透明PP 基料* 白色 黄色 橙色 红色 粉色 紫色 浅蓝色 正蓝色 深蓝色 浅绿色 蓝绿色 正绿色 深灰色 正灰色 米色 棕色 黑色

MagIQ_Non-Woven_Electret_Plus_Product_Bulletin-CN MagIQ™无纺驻极添加剂 应用于防护口罩的功能性母料 口罩组成 结构 材料 方法 功能 S（纺粘） 外层 PP M（熔喷） 中间层 PP S（纺粘） 外层 PP 纺粘无纺布 防水、防止飞沫粘附 熔喷无纺布 过滤空气中微生物、颗粒和飞沫 纺粘无纺布 吸水、吸收呼吸产生的水蒸气 驻极母粒是一种应用于生产聚丙烯熔喷无 纺布的材料，可用于制作具有持久过滤性 能的防护口罩。