GREEN 333 TRANSL

GLS 333-014 CLEAR

STAN-TONE HCC-35296 CBP 333 ALABSTR

SCOTTS UV GREEN 333

Peel, PLI 12 19 23 20 19 reSound OM 5510 for PP reSound OM 5510-60N Room Temperature 70C 1 day 1 week 2 weeks 6 months 1 week 2 weeks 3 weeks Bio-derived Content (%) 50% 50% 50% 50% 50% 50% 50% Hardness, Shore A 60 60 60 60 60 60 60 Specific Gravity 0.89 0.89 0.89 0.89 0.89 0.89 0.90 50% Modulus, PSI 247 241 244 251 234 244 240 100% Modulus, PSI 343 333 338 339 321 331 326 Tensile Strength, PSI 625 621 647 610 633 662 642 Elongation, % 306 314 309 313 312 315 315 Tear Strength, PLI 109 108 113 113 111 117 115 reSound OM 5520-55N Room Temperature 70C 1 day 1 week 2 weeks 6 months 1 week 2 weeks 3 weeks Bio-derived Content (%) 49% 49% 49% 49% 49% 49% 49% Hardness, Shore A 54 54 55 55 54 55 56 Specific Gravity 0.95 0.95 0.96 0.96 0.95 0.96 0.96 50% Modulus, PSI 258 256 256 265 266 271 257 100% Modulus, PSI 353 355 357 362 373 379 367 Tensile strength, PSI 637 615 637 669 651 674 642 Elongation, % 319 315 319 333 313 319 315 Tear Strength, PLI 146 136 133 142 137 138 141 reSound OM 5510-45N Room Temperature 70C 1 day 1 week 2 weeks 6 months 1 week 2 weeks 3 weeks Bio-derived Content (%) 40% 40% 40% 40% 40% 40% 40% Hardness, Shore A 45 46 47 46 46 45 45 Specific Gravity 0.88 0.89 0.89 0.89 0.89 0.89 0.90 50% Modulus, PSI 153 158 154 162 137 136 133 100% Modulus, PSI 251 259 259 261 226 222 218 Tensile Strength, PSI 438 481 451 495 417 470 486 Elongation, % 215 240 211 243 204 227 238 Tear Strength, PLI 84 81 87 82 83 85 84 AGING – PROPERTY RETENTION • Tested at room temperature and 70° C for comparison • Hardness, tensile strength elongation and modulus showed great retention Overmolding onto PP Overmolding onto ABS RHEOLOGY Suitable for injection molding and overmolding 1.0 10 100 1000 10000 100000 10.0 100.0 1000.0 reSound OM 5510-30N reSound OM 5510-45N reSound OM 5510-60N reSound OM 5510-70N Shear Rate, 1/s Ca pi lla ry V is co si ty , P a* s 1.0 10 100 1000 10000 100000 10.0 100.0 1000.0 reSound OM 5520-55N Shear Rate, 1/s Ca pi lla ry V is co si ty , P a* s Capillary viscosity at 200°C Capillary viscosity at 200°C reSound OM 5510 for PP reSound OM 5520 for ABS www.avient.com Copyright © 2020, Avient Corporation.

Table 2: GLS 271-051 overmolded to polyacetal (Delrin511P) and its copolymer (Hostaform 9021) LC 271-051 to Delrin 511P Average, N/mm Maximum,N/mm Mode of failure Melt temperature 1.65 1.95 Adhesive 220°C 1.84 1.98 Adhesive 220°C LC 271-051 to Hostaform 9021 Average, N/mm Maximum,N/mm Mode of failure Melt temperature 2.12 2.22 Adhesive 220°C 2.14 2.33 Adhesive 220°C Universal Polyamide Overmold Update: In earlier studies, robust universal polyamide overmolding materials and their benefits were introduced,2,3 where overmoldability of a 60 shore A and a 75 shore A material to Nylon was demonstrated.

UPLC0213 SPORT LC PINK UPLC0289 SPORT LC NAVY UPLC0322 SPORT LC TEAL

48600 EPIC LC BURGUNDY 75300 EPIC LC TURQUOISE 40500 EPIC LC SUPER RED