Mevopur™ Healthcare Colorants and Formulations Special Effect Colorants for Healthcare Devices and Pharmaceutical Packaging Self-administered medication, for example via pen devices and inhalers, has been the norm for many years. Ingredients used in the Mevopur™ portfolio have been tested to industry standards that support applications in both medical devices and pharmaceutical packaging.* KEY CHARACTERISTICS • Manufactured at four ISO 13485 certified manufacturing sites, providing global consistency and increased security of supply • Documented change control beyond CAS number, reducing risk of change • Non-phthalate and formulated without animal-derived substances • Available as pre-colored formulation or concentrate and for use in different polymers REGULATORY SUPPORT • Raw materials tested to: - ISO 10993-1 and USP biological evaluation - European Pharmacopeia 3.1.3/3.1.5 (polyolefin) - USP (polyethylene) - ICH Q3D elemental impurities • Registered Drug Master File (Type III) and/or Device Master File • Food contact established with FDA/EU** APPLICATION BULLETIN * Design note: Effect colors require careful consideration of part design and polymer flow paths to minimize visible flow lines.

在很宽的频率范围仍保持稳定的射频性能 0,0 2,0 4,0 6,0 8,0 10,0 12,0 0 10 20 30 40 50 60 D ie le ct ri c co ns ta nt F requency [GHz ] PR E PE RM® PPE 95 0 PR E PE RM® PPE 80 0 PR E PE RM® PPE 44 0 PR E PE RM® PPE 32 0 PR E PE RM® PPE 26 0 生产过程中批次间的稳定性 * 2018 年芬兰有限公司VTT技术研究中心测量数据 介 电 常 数 损 耗 因 数 介 电 常 数 频率 [GHz] 频率 [GHz] 分批编号 （1250 kg/批次） PREPERM™ PPE950 PREPERM™ PPE800 PREPERM™ PPE440 PREPERM™ PPE320 PREPERM™ PPE260 -- 目标介电常数 -- +/- 2% 3,76 3,78 3,80 3,82 3,84 3,86 3,88 3,90 3,92 3,94 0 1 2 3 4 5 6 7 8 D ie le ct ri c co ns ta nt P a llet number (1250 k g/pa llet ) Die le ctric cons ta nt ta rge t +/- 2 % 0,000 0,002 0,004 0,006 0,008 0,010 0 10 20 30 40 50 60 Lo ss t a ng en t F requency [GHz ] PR E PE RM® PPE 95 0 PR E PE RM® PPE 80 0 PR E PE RM® PPE 44 0 PR E PE RM® PPE 32 0 PR E PE RM® PPE 26 0 0,000 0,002 0,004 0,006 0,008 0,010 0 10 20 30 40 50 60 Lo ss t a ng en t F requency [GHz ] PR E PE RM® PPE 95 0 PR E PE RM® PPE 80 0 PR E PE RM® PPE 44 0 PR E PE RM® PPE 32 0 PR E PE RM® PPE 26 0 0,000 0,002 0,004 0,006 0,008 0,010 0 10 20 30 40 50 60 Lo ss t a ng en t F requency [GHz ] PR E PE RM® PPE 95 0 PR E PE RM® PPE 80 0 PR E PE RM® PPE 44 0 PR E PE RM® PPE 32 0 PR E PE RM® PPE 26 0 1.844.4AVIENT www.avient.com 版权所有©2022 埃万特公司。

Degraded/ overheated material • Decrease melt temperature • Decrease back pressure • Use smaller barrel • Decrease injection speed Gate location and/or size • Relocate gate to nonstress area • Increase gate size to allow higher flow rate and lower molded in stress Fibers/Minerals on Surface or Uneven Surface Appearance Melt temperature too low • Increase melt temperature • Increase mold temperature • Increase injection speed Insufficient packing • Increase hold pressure and time • Increase shot size Processing Guide 5 Problem Cause Solution Sink Marks Part geometry too thick • Reduce wall thickness • Reduce rib thickness Melt too hot • Decrease nozzle and barrel temperatures • Decrease mold temperature Insufficient material volume • Increase shot size • Increase injection rate • Increase packing pressure • Increase gate size Flash Injection pressure too high • Decrease injection pressure • Increase clamp pressure • Decrease injection rate • Increase transfer position Excess material volume • Adjust transfer position • Decrease pack pressure • Decrease shot size • Decrease injection rate Melt and/or mold too hot • Decrease nozzle and barrel temperatures • Decrease mold temperature • Decrease screw speed Loose clamp • Reset mold height • Increase clamp tonnage Shrink Too much shrink • Increase cooling time • Decrease mold temperature Too little shrink • Decrease cooling time • Increase mold temperature Troubleshooting Recommendations 6 Nymax Polymer Formulations Troubleshooting Recommendations Problem Cause Solution Burning Process related • Decrease nozzle and barrel temperatures • Decrease mold temperature • Decrease injection rate Mold design • Clean, widen and increase number of vents • Increase gate size to reduce shear Wet material • Check moisture.

Dominic Townsend, President Effective Date: 22 March 2024 Expiration Date: 28 February 2025 Revision Date: 22 March 2024 Avient Corporation - Albany 4 Rothwell Ave, PO Box 300-009 Albany Industrial Estate Auckland 0632 New Zealand Design and Manufacture of Colorants and Additives for Plastics 65536-116856Certificate No: Page 6 of 53 ABS Quality Evaluations ABS Quality Evaluations, Inc. 1701 City Plaza Drive, Spring, TX 77389, U.S.A. Dominic Townsend, President Effective Date: 22 March 2024 Expiration Date: 28 February 2025 Revision Date: 22 March 2024 Avient Corporation - Esenyurt, Turkey Orhan Gazi Mahallesi 1683 Sokak No:6 34538 Esenyurt Istanbul Turkey Design and Manufacture of Specialty Engineered Thermoplastics 65536-116867Certificate No: Page 16 of 53 ABS Quality Evaluations ABS Quality Evaluations, Inc. 1701 City Plaza Drive, Spring, TX 77389, U.S.A. Manufacture of Colorants and Additives for Plastics 65536-100253Certificate No: Page 52 of 53 ABS Quality Evaluations ABS Quality Evaluations, Inc. 1701 City Plaza Drive, Spring, TX 77389, U.S.A.

Attachment 6    Color, Additives and Inks    Color, Additives and Inks

GEON M3500 WHITE 1367 (T3) 103596-01 EXPE7755DK WHITE 1000 PP FR 8-6 LMS-1000

GEON BP90W2 WHITE 1213 WHITE TINT PP FR 8-6 LMS-1000

WHITE PC AO V1 WHITE PC CS V3 PP FR 8-6 LMS-1000

WHITE S.K. WHITE DR PP FR 8-6 LMS-1000

UV WHITE MED UV WHITE SHIELD 10 PP PP FR 8-6 LMS-1000