Thermoset Composite Springs For Vibratory Conveyor Equipment PRODUCT BULLETIN THICKNESS (in)* RESIN FLEXURAL STRENGTH (x10^3 psi) FLEXURAL MODULUS (x10^6 psi) STRAIN (%) FIBER CONTENT (wt%) MIN Vinyl Ester 115 4.0 3.3 68 AVG Vinyl Ester 124 4.6 3.2 71 MIN Epoxy 138 5.1 2.3 65 AVG Epoxy 153 5.5 2.3 67 Avient’s composite springs are manufactured using a continuous pultrusion process.

THICKNESS (in)* RESIN FLEXURAL STRENGTH (x10^3 psi) FLEXURAL MODULUS (x10^6 psi) STRAIN (%) FIBER CONTENT (wt%) MIN Vinyl Ester 115 4.0 3.3 68 AVG Vinyl Ester 124 4.6 3.2 71 MIN Epoxy 138 5.1 2.3 65 AVG Epoxy 153 5.5 2.3 67 Avient’s composite springs are manufactured using a continuous pultrusion process.

These braces, traditionally made with steel, were initially fabricated from aluminum for a solid weight savings of 3 kg per vehicle over steel versions.

GLS™ TPEs with Antimicrobial Technologies This specialty line of GLS™ thermoplastic elastomers has imbedded antimicrobial additives that inhibit bacterial growth by 99.9% or more (log 3) and resist fungal growth to protect molded plastic parts.

1. This is 50 to 100 times greater than standard thermoplastics and 1/5 that of cast aluminum. 3.

Colorant Chromatics™ X-Ray Opaque Formulations

Low and stable εr • Ultra-low loss • Low water absorption • Hydrolysis resistant • Excellent impact strength • Mass production friendly APPLICATION BULLETIN A PREPERM radome grade gives you a longer and wider scanning range compared to common resins. 40 m Comparison of PREPERM radome grade and common resin at 24 GHz and 79 GHz bands Common Resin Common Resin PREPERM™ RB260 PREPERM™ RB260 PARAMETER PBT+GF PEI PREPERM RADOME GRADE ELECTRICAL εr @ 77 GHz 3.5–4.2 3.1 2.6 Tan @ 77 GHz 0.03 0.003 0.003 Isotropic @ 77 GHz No Yes Yes MECHANICAL Impact strength -20°C/+23°C notched izod 6kJ/m2/6kJ/m2 6kJ/m2/6kJ/m2 25kJ/m2/35kJ/m2 Elongation @ break 3% 40% 22% Brittleness Yes Yes No THERMAL Max use temp (HDT) 200–220°C 190–200°C 150–180°C Inherent flammability HB V0 V1 to V0 ENVIRONMENTAL Water absorption 0.4% 1.25% 0.2% Chemical resistance Good Excellent Good Hydrolysis resistant Specific Grade Yes Yes MANUFACTURING Batch-to-batch consistency Limited Excellent Excellent Moldability Excellent Good Good Abrasive Yes No No Mold shrinkage Inconsistent, warpage issue Homogenous Homogenous Raw material price Low High Moderate Copyright © 2022, Avient Corporation.

KEY CHARACTERISTICS • Excellent lot-to-lot and within-lot consistency for high-quality homogeneous black shades • Easy processing and support of a long-lasting spin pack lifetime • Fastness properties and specification tolerances on par with high-end products on the market • Standard and bluish undertones available in high pigment loadings for an efficient and competitive coloration package • Can be combined with additives into a single combination concentrate for convenience • Compliance with global, regional, and local standards and regulations* RECOMMENDED USE • In most cases, the concentrate is added directly to the resin using gravimetric or volumetric dosing units; for some processes, the concentrate can be added via a side stream extruder (direct spinning) • The recommended dosages are from 3% for the typical automotive, technical, and carpet applications and up to 6% for apparel, footwear, and home textile yarns * Contact your local sales representative for more information on regulatory compliance PRODUCT BULLETIN Copyright © 2022, Avient Corporation.

The Committee will meet at least two times a year and at such other times as may be requested by its Chair. 3 • The Committee will annually review its charter and recommend any changes to the Governance and Corporate Responsibility Committee.

CESA BLOCK – STANDARD OFFERINGS POLYMER FAMILY MATERIAL PRODUCT NAME DOSAGE Polyolefin PEA0820045 CESA Block PEA0820045 1–5% Polypropylene PPA0820056 CESA Block PPA0820056 1–5% Polyamide ABA0820022 CESA Block ABA0820022 2–6% Polyester NBA0820024 CESA Block NBA0820024 1–5% Styrenic SLA0820010 CESA Block SLA0820010 1–5% TPU RUA0820028 CESA Block RUA0820028 1–5% CESA Block additives can be used in combination with other CESA masterbatches, and formulations can be customized for most applications.