CABLE DESIGN CONSIDERATIONS 1. LAN/coaxial sheathing1 5865/1 4.0 12.0 180 42 Cca Very good flame retardancy and easy processing. LV cable sheathing2 5549/1 3.0 12.0 170 45 B2ca Excellent flame retardancy and low heat release.

Figure 1 shows the TEM of two of SEBS/oil/PP compound (1). Reference 1. Gravity 1.15 0.89 Ratio of specific gravity 1.29 1 Hardness, A 50 54 Tensile, Pa, 106 (psi) 8.96 (1300) 7.01 (1029) Tear, N/M, 104 (lb/in) 3.20 (182) 3.22 (183) Elongation, % >500 690 Clarity transparent transparent British tear test passed passed Boiling water/dish washer passed passed Table II Comparison of properties of SBC compound, PVC and TPV PVC-60 A TPV-67A SBC-59A SBC-74A Hardness, A 60 67 59 74 Specific gravity 1.20 0.97 0.90 0.90 100% modulus, Pa, 106 (psi) 7.07 (1025) 5.67 (822) 2.03 (295) 3.63 (527) Tensile, Pa, 106 (psi) 9.65 (1400) 6.21 (900) 6.94(1007) 11.7(1700) Tear, N/M, 104 (lb/in) 3.25 (185) 2.14 (122) 3.36 (192) 4.38 (250) Elongation 250 150 650 550 Clarity transparent opaque semi-transparent transparent 3040 / ANTEC 2003

CABLE DESIGN CONSIDERATIONS 1. LAN/coaxial sheathing1 5865/1 4.0 12.0 180 42 Cca Very good flame retardancy and easy processing. LV cable sheathing2 5549/1 3.0 12.0 170 45 B2ca Excellent flame retardancy and low heat release.

Drying non-halogenated materials is suggested. 2 hours @ 100 (38) Moisture Range (%) Not required Follow up by purging machine with general purpose PP • Residence time should not exceed 5 minutes for Maxxam FR products • General ventilation is suggested Shut Down • Purge the equipment with a general purpose PP • All tooling and equipment must be free of any residual Maxxam FR upon shut down • Continue generating parts made from the natural PP until clear • Wipe down tool steel with mold cleaner • When using a hot runner system, care must be taken to remove residual product from the manifold MOLD DESIGN RECOMMENDATIONS Cold Slug Wells • Place cold slug wells at the base of the sprue to capture the cold material first emerging from the nozzle • Place cold slug wells at every 90° bend in the runner system • Well depths approximately 2–3 times the diameter of the runner provide best results Draft Angle • Draft angle should be 1/2°–1° per side.

U-PVC PIPE & FITTING PRODUCER P I P E & F I T T I N G • Meet the diverse coefficient of friction (CoF) requirements across various film structures and compositions for a wide range of applications • Improve the speed of slip blooming and ensure consistent slip performance post-film production • Preserve excellent optical and mechanical properties • Compliance with food regulations for end packaging in food sealant applications • Improved the customer’s workplace environment by installing a new tote liquid supply system • Enhanced color consistency and reduced production wastage from pigment speck and streak issues • Complied with strict regulatory controls for potable pipe requirements ColorMatrix Liquid Color Concentrates KEY REQUIREMENT WHY AVIENT AVIENT SOLUTION PRODUCTIVITY + COMPLIANCE Avient Corporation 1 • Meet the diverse coefficient of friction (CoF) requirements across various film structures and compositions for a wide range of applications • Improve the speed of slip blooming and ensure consistent slip performance post-film production • Preserve excellent optical and mechanical properties • Compliance with food regulations for end packaging in food sealant applications KEY REQUIREMENT • Standard colorant to apply for internal color matching in PVC sheet applications • Phthalate free plasticizer class as hazardous healthy control requirement • Good thermal stability and compatibility in PVC resin of color index choices • Compliance with Heavy metal free and RoHS regulation KEY REQUIREMENT• Support the mass production capacity of white pipe extrusion • Reduces particulates from TiO2 bulk pigment use in the workplace • Ensure excellent pigment dispersion to meet mechanical pipe properties over an extensive useful life • Compliance with NSF and UL regulations for end application requirements in the building and construction industry LIQUID COLOR CONCENTRATES AND DOSING | AVIENTLEARN MORE KEY REQUIREMENTS Copyright © 2025, Avient Corporation. All Rights Reserved. https://www.avient.com/products/polymer-colorants/liquid-color-concentrates-and-dosing https://www.avient.com/products/polymer-colorants/liquid-color-concentrates-and-dosing https://www.avient.com/products/polymer-colorants/liquid-color-concentrates-and-dosing Slide 1: U-Pvc pipe & fitting Producer

MOVING HIGH PERFORMANCE FIBERS FORWARD LOCATIONS Headquarters, R&D, Manufacturing FIBER-LINE® LLC 3050 Campus Drive Hatfield, PA 19440 +1 215.997.9181 fiber@fiber-line.com Manufacturing Operations FIBER-LINE® LLC 280 Performance Drive SE Hickory, NC 28602 +1 828.326.8700 fiber@fiber-line.com EMEA & Asia Pacific Operations FIBER-LINE® INTERNATIONAL B.V.

No. 0514.02) 12/11/2023 Page 1 of 1 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 AVIENT CORPORATION – ANALYTICAL SOLUTIONS 33587 Walker Road Avon Lake, OH 44012 Stephanie Mims Phone: 440-930-3499 CHEMICAL Valid To: September 30, 2025 Certificate Number: 0514.02 In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following rubber and plastics tests: Test Description: Test Method or Standard: FTIR (Fourier Transform Infrared) Spectroscopy ASTM E1252 (Except 7.6, 11.2, and 11.4) Flammability Horizontal Burn of Self-Supporting Plastics ASTM D635; UL 94; IEC 60695-11-10 Horizontal Burn of Materials Used in Occupant Compartments of Motor Vehicles ASTM D5132; FMVSS 302 (49 CFR 571.302); ISO 3785 Vertical Burn, 20 mm ASTM D3801; UL 94; IEC 60695-11-10 Vertical Burn, 125 mm ASTM D5048; UL 94; IEC 60695-11-20 Thin Material Burning Test UL-94 Glow Wire Test IEC 60695 2-10, 2-11, 2-12, 2-13 Thermal Analysis DSC (Differential Scanning Calorimetry) ASTM D3418, E794, E1356 TGA (Thermogravimetric Analysis) ASTM E1131 TMA (Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis) ASTM E831; ISO 11359-2 Karl Fischer Moisture Content ASTM D6869 For the tests to which this accreditation applies, please refer to the laboratory’s Chemical Scope of Accreditation.

Injection Molded Guide | 1 GLS™ TPE OVERMOLDING GUIDE 1 Introduction Avient is the recognized leader in the overmolding of thermoplastic elastomers (TPEs). Table 1. Table 1.

Art. 23 N° 1 D.L. 825 Ley de IVA.

Certificate Number: 255 ISO2P Date First Registered: 03/04/2023 Issued on: 11/04/2023 Valid until: 10/04/2026 Awarded to AVIENT PAKISTAN (PVT) LTD 1A/1, Sector#20, Korangi Industrial Area, Sector 20 Karachi, Pakistan In recognition of the Organization´s Food Safety Management System which complies with : ISO 22000:2018 Food Category : I For the scope of activities described below: Manufacturing & Processing of Polymer Resins & Master batch F-3/22/ A 100 Issue date : 06/2022 Version:03 It is mandatory to carry out the surveillance audit on its time.