No. 0514.02) Revised 09/21/2021 Page 1 of 2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 POLYMER DIAGNOSTICS INC. 33587 Walker Road Avon Lake, OH 44012 Ana De La Ree Phone: 440-930-3271 CHEMICAL Valid To: December 31, 2021 Certificate Number: 0514.02 In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following rubber and plastics tests: Test Description: Test Method or Standard: Analysis of Volatile Contaminants from Polymers (Chromatography) VDA 277 FTIR (Fourier Transform Infrared) Spectroscopy ASTM E1252 (Except 7.6, 11.2, and 11.4) Flammability Horizontal Burn of Self-Supporting Plastics ASTM D635; UL 94; IEC 60695-11-10 Horizontal Burn of Materials Used in Occupant Compartments of Motor Vehicles ASTM D5132; FMVSS 302 (49 CFR 571.302); ISO 3785 Vertical Burn, 20 mm ASTM D3801; UL 94; IEC 60695-11-10 Vertical Burn, 125 mm ASTM D5048; UL 94; IEC 60695-11-20 Oxygen Index ASTM D2863 FT1 Flame Test UL1581, Clause 1060; UL2556/CSA C22.2 No 2556, Clause 9.3 Cable Flame Test UL1581, Clause 1061 VW1 Flame Test UL1581, Clause 1080; UL2556/CSA C22.2 No 2556, Clause 9.4 FT2/FH Flame Test UL1581, Clause 1100; UL2556/CSA C22.2 No 2556, Clause 9.1 FV-1 Flame Test UL1581, Clause 1060; UL2556/CSA C22.2 No 2556, Clause 9.5 Thin Material Burning Test UL-94 Glow Wire Test IEC 60695 2-10, 2-11, 2-12, 2-13 RVCM in PVC ASTM D4443 (A2LA Cert. No. 0514.02) Revised 09/21/2021 Page 2 of 2 Test Description: Test Method or Standard: Thermal Analysis DSC (Differential Scanning Calorimetry) ASTM D3418, E794, E1356 TGA (Thermogravimetric Analysis) ASTM E1131 Karl Fischer Moisture Content ASTM D6869 Phthalate Determination by CPSIA CPSC-CH-C1001-09.3, CPSC-CH-C1001-09.4 1 The Consumer Product Safety Improvement Act (CPSIA) requires that every children's product subject to a federal consumer product safety requirement be tested by a Consumer Product Safety Commission (CPSC) accepted laboratory for compliance with the applicable federal children's product safety requirements.

No. 0514.02) Revised 10/08/2019 Page 1 of 2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 POLYMER DIAGNOSTICS INC. 33587 Walker Road Avon Lake, OH 44012 Ana De La Ree Phone: 440-930-3271 CHEMICAL Valid To: December 31, 2019 Certificate Number: 0514.02 In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following rubber and plastics tests: Test Description: Test Method or Standard: Analysis of Volatile Contaminants from Polymers (Chromatography) VDA 277 FTIR (Fourier Transform Infrared) Spectroscopy ASTM E1252 (Except 7.6, 11.2, and 11.4) Flammability Horizontal Burn of Self-Supporting Plastics ASTM D635; UL 94; IEC 60695-11-10 Horizontal Burn of Materials Used in Occupant Compartments of Motor Vehicles ASTM D5132; FMVSS 302 (49 CFR 571.302) Vertical Burn, 20 mm ASTM D3801; UL 94; IEC 60695-11-10 Vertical Burn, 125 mm ASTM D5048; UL 94; IEC 60695-11-20 Oxygen Index ASTM D2863 FT1 Flame Test UL1581, Clause 1060; UL2556/CSA C22.2 No 2556, Clause 9.3 Cable Flame Test UL1581, Clause 1061 VW1 Flame Test UL1581, Clause 1080; UL2556/CSA C22.2 No 2556, Clause 9.4 FT2/FH Flame Test UL1581, Clause 1100; UL2556/CSA C22.2 No 2556, Clause 9.1 FV-1 Flame Test UL1581, Clause 1060; UL2556/CSA C22.2 No 2556, Clause 9.5 Thin Material Burning Test UL-94 Glow Wire Test IEC 60695 2-10, 2-11, 2-12, 2-13 RVCM in PVC ASTM D4443 (A2LA Cert. No. 0514.02) Revised 10/08/2019 Page 2 of 2 Test Description: Test Method or Standard: Thermal Analysis DSC (Differential Scanning Calorimetry) ASTM D3418, E794, E1356 TGA (Thermogravimetric Analysis) ASTM E1131 Karl Fischer Moisture Content ASTM D6869 Phthalate Determination by CPSIA CPSC-CH-C1001-09.3 1 The Consumer Product Safety Improvement Act (CPSIA) requires that every children's product subject to a federal consumer product safety requirement be tested by a Consumer Product Safety Commission (CPSC) accepted laboratory for compliance with the applicable federal children's product safety requirements.

Microsoft PowerPoint - AVNT Q4 2023 Earnings Presentation v7 AVIENT CORPORATION F O U R T H Q U A R T E R 2 0 2 3 R E S U L T S A N D 2 0 2 4 F I N A N C I A L G U I D A N C E (NYSE: AVNT) F E B R U A RY 1 4 , 2 0 2 4 DISCLAIMER Forward-Looking Statements Certain statements contained in or incorporated by reference into this presentation constitute “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. Additionally, Adjusted EPS excludes the impact of special items and amortization expense associated with intangible assets. 2 O P E N I N G R E M A R K S DR. ASHISH KHANDPUR PRESIDENT & CEO 4 5 PORTFOLIO TRANSFORMATION 5 7% 46% 66% 87% 100% 0% 20% 40% 60% 80% 100% 2005 2010 2015 2020 2023 % o f A dj us te d EB IT D A Commodity JVs Distribution Performance Products & Solutions Specialty Businesses Adjusted EBITDA from Specialty Applications SUSTAINABILITY AS A GROWTH DRIVER 7 LONG-TERM REVENUE GROWTH DRIVERS Sustainable Solutions Composites, Healthcare, Asia / LATAM Overlap Other 60%+ Key Growth Drivers Total Company Revenue Growth Drivers Long-Term Growth Rate Sustainable Solutions 8–12% Composites 8–10% Healthcare 8–10% Asia / LATAM 5% Other 0–2% Avient 6% END MARKET OBSERVATIONS (% OF COMPANY SALES) ENERGY 5% DEFENSE 7% TELECOMMUNICATIONS 4% HEALTHCARE 7% 8 TRANSPORTATION 10% INDUSTRIAL 16% BUILDING & CONSTRUCTION 9% CONSUMER 19% PACKAGING 23% 9 REGIONAL OBSERVATIONS (% OF COMPANY SALES) 9 US & Canada Latin America EMEA Asia 41% 36% 18% 5% Q 4 2 0 2 3 R E S U LT S Q4 2023 PERFORMANCE VS.

Enhanced customer focus 2. Enhanced customer focus 2. All Rights Reserved 2024 61 History of balanced capital deployment $0 .1 6 $0 .2 0 $0 .2 6 $0 .3 4 $0 .4 2 $0 .5 0 $0 .5 8 $0 .7 2 $0 .7 9 $0 .8 2 $0 .8 8 $0 .9 6 $1 .0 0 $1 .0 3 $1 .0 8 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 Dividend $ per shareAdj.

IR Deck - AVNT-2024.06.30 (Earnings) AVIENT CORPORATION S E C O N D Q U A R T E R 2 0 2 4 R E S U L T S A N D 2 0 2 4 F I N A N C I A L G U I D A N C E (NYSE: AVNT) AU G U S T 6 , 2 0 2 4 DISCLAIMER Forward-Looking Statements Certain statements contained in or incorporated by reference into this presentation constitute “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. For the same reasons, Avient is unable to address the probable significance of the unavailable information. 2 3 Q2 2024 HIGHLIGHTS • 5% organic sales growth supported by broad-based growth across all regions in both CAI and SEM segments • Growth stemmed from gaining share, winning new product specifications and restocking in certain end markets • Cost control and operational discipline expanded EBITDA margins by 100 bps • EPS exceeded guidance by $0.05 and increased 21% vs the prior year Adj. EBITDA Margin 16.9% +100 bps Q 2 2024 R ES U LT S Q2 2024 PERFORMANCE VS.

Thursday, November 2, 2023 Thursday, November 2, 2023

KEY PERFORMANCE ADVANTAGES Southern Yellow Pine1 Equivalent Wood Pole GridCore FRP Pole2 14 in x .750 in Length (ft) Load Class3 Allowable Class Load4 (kip) Weight (lb) Deflection5 (in) Weight (lb) Deflection5 (in) 40 3 1.95 1360 35 1040 12 2 2.41 1580 32 14 1 2.93 1810 30 18 H1 3.51 2050 28 21 H2 4.16 2310 26 25 45 3 1.95 1630 45 1170 17 2 2.41 1880 41 21 1 2.93 2160 38 26 H1 3.51 2450 36 31 H2 4.16 2760 33 37 50 3 1.95 1910 56 1300 24 2 2.41 2210 52 30 1 2.93 2530 48 36 H1 3.51 2880 45 44 H2 4.16 3240 42 52 55 3 1.95 2210 68 1430 33 2 2.41 2550 63 40 1 2.93 2930 58 49 H1 3.51 3320 54 59 H2 4.16 3740 51 70 60 3 1.95 2520 82 1560 43 2 2.41 2910 76 53 1 2.93 3340 70 65 H1 3.51 3790 65 78 H2 4.16 4270 61 92 65 3 1.95 2840 97 1690 56 2 2.41 3290 90 69 1 2.93 3770 83 84 H1 3.51 4280 77 100 H2 4.16 4820 72 119 70 3 1.95 3180 114 1820 71 2 2.41 3690 105 87 1 2.93 4220 97 106 H1 3.51 4790 90 127 H2 4.16 5390 85 150 POLE SELECTION GUIDE 1 Wood properties data are per ANSI O5.1-2022 Table 1. For other species shown in the table above, contact Avient for suggestions. 2 FRP pole sizes are selected based on allowable Class loads specified in NESC Table 261-1.

KEY CHARACTERISTICS Formulated with bio-based resin and/or 10–50% filler from renewable plant sources, Maxxam BIO formulations: • Reduce product carbon footprint • Achieve equivalent performance to standard polyolefin formulations • Provide good stiffness, durability, impact resistance and UV stability • Deliver good surface finish and are easy to color • Enable customized performance characteristics depending on application need • Offer food contact compliance MARKETS AND APPLICATIONS Maxxam BIO formulations are suitable for use across many industries and applications where traditional polyolefin materials are used, including: • Transportation Interior Applications - Decorative profiles, trunk side liners, pillars, T-cup • Industrial - Structural parts, furniture • Consumer - Household goods, personal care items, packaging, office supplies, food contact applications • Electrical and Electronic – Housings, buttons, junction boxes SUSTAINABILITY BENEFITS • Formulated with bio-based resin and/or 10–50% natural filler • Utilize natural filler from renewable plant sources including olive seed based powder and cellulose fiber • Offer a lower product carbon footprint compared to traditional petroleum-based feedstock • Can be recycled at end of life PRODUCT BULLETIN CHARACTERISTICS UNITS Maxxam BIO MX5200-5036 Natural FD Maxxam BIO MX5200-5030 Natural FD Maxxam BIO MX5200-5030 Natural FD X1 Maxxam BIO MX5200-5001 RS HS Natural Maxxam BIO MX5200-5033 RS HS Natural Maxxam BIO MX5200-5034 RS HS Natural Maxxam BIO MX5200-5035 RS HS Natural Filler/Reinforcement Unfilled Unfilled Unfilled 30% Glass Fiber 10% Mineral 20% Mineral 30% Mineral Density (ISO 1183) g/cm 0.90 0.90 0.90 1.12 0.96 1.03 1.12 Tensile Modulus (ISO 527-1) @ 23°C MPa 1500 1000 1000 6400 1350 1650 2100 Tensile Stress (ISO 527-2) @ 23°C MPa 27.0 20.0 20.0 75.0 13.0 14.0 15.0 Tensile Strain at Break (ISO 527-2) @ 23°C % 5 50 50 3.0 50 37 18 Charpy Notched (ISO 179) kJ/m 5 20 25 10 12 10 10 CHARACTERISTICS UNITS Maxxam BIO MX5200-5023 RS HS HI Natural 70 Maxxam BIO MX5200-5025 RS HS Natural 70 Maxxam BIO MX5200-5004 RS HS Natural 70 Maxxam BIO MX5200-5003 RS Natural 70 Maxxam BIO MX5200-5009 RS HS Natural 70 Maxxam BIO MX5200-5024 RS HS Natural 70 Maxxam BIO MX5200-5022 RS HS Natural 70 Filler/Reinforcement 15% Olive Seed Based 25% Olive Seed Based 30% Olive Seed Based/ 10% Mineral 35% Olive Seed Based/ 5% Mineral 15% Olive Seed Based/ 17% Glass Fiber/ Mineral 20% Olive Seed Based/ 20% Glass/ Mineral 10% Olive Seed Based/ 20% Mineral Density (ISO 1183) g/ccm 1.00 1.15 1.10 1.07 1.09 1.25 1.10 Tensile Modulus (ISO 527-1) @ 23°C MPa 1750 2000 2700 2500 3800 3500 4100 Tensile Stress at Break (ISO 527-2) @ 23°C MPa 21.0 20.0 30.0 20.0 40.0 35.0 42.0 Tensile Strain at Break (ISO 527-2) @ 23°C % 24 5 3 5 3 4 2 Notched Izod (ISO 180) kJ/m 15 7 3 2 5 15 7 MAXXAM BIO POLYOLEFINS – BIO-BASED RESIN – TECHNICAL PERFORMANCE MAXXAM BIO POLYOLEFINS – OLIVE SEED BASED FILLER – TECHNICAL PERFORMANCE CHARACTERISTICS UNITS Maxxam BIO MX5200-5029 NF HI UV Black X1 Maxxam BIO MX5200-5032 NFS UV Natural Maxxam BIO MX5200-5020 NF/NFS UV Natural X1​ Maxxam BIO MX5200-5016 NF Natural Filler/Reinforcement 10% Cellulose Fiber 20% Cellulose Fiber 30% Cellulose Fiber 40% Cellulose Fiber Density (ISO 1183) g/ccm 0.95 1.00 1.02 1.07 Tensile Modulus ISO 527-1) @ 23°C MPa 1550 1750 2640 3600 Tensile Stress at Break (ISO 527-2) @ 23°C MPa 33 30 48 55 Tensile Strain at Break (ISO 527-2) @ 23°C % 8 12 9 4 Charpy Notched Impact Strength (ISO 179/1eA) kJ/m2 5 6 5 5 Charpy Unnotched Impact Strength (ISO 179/1eU) kJ/m2 33 49 38 30 MAXXAM BIO POLYOLEFINS – CELLULOSE FIBER FILLER – TECHNICAL PERFORMANCE Copyright © 2023, Avient Corporation.

Avient corporation first quarter 2024 results and 2024 financial guidance AVIENT CORPORATION F I R S T Q U A R T E R 2 0 2 4 R E S U L T S A N D 2 0 2 4 F I N A N C I A L G U I D A N C E (NYSE: AVNT) M AY 7 , 2 0 2 4 DISCLAIMER Forward-Looking Statements Certain statements contained in or incorporated by reference into this presentation constitute “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. For the same reasons, Avient is unable to address the probable significance of the unavailable information. 2 O P E N I N G RE MARK S 4 REGIONAL DEMAND TRENDS-TOTAL COMPANY Q 1 S A L E S V S P Y ( E X C L U D I N G F X ) 4 US & Canada Latin America EMEA Asia +2% -6% Flat +2% Avient ex. Q1 2023 (TOTAL COMPANY) $846 $829 Q1 23 Q1 24 $134 $143 Q1 23 Q1 24 17.3% Sales Adjusted EBITDA (in millions) $0.63 $0.76 Q1 23 Q1 24 Adjusted EPS (in millions) + 7% + 21% Sales Adjusted EBITDA Adjusted EPS 6 - 2% 15.8% +150 bps * * * Adjusted EBITDA Margin % Q1 2024 SEGMENT PERFORMANCE (COLORS, ADDITIVES & INKS) $537 $515 Q1 23 Q1 24 $91 $97 Q1 23 Q1 24 18.8% Sales Adjusted EBITDA (in millions) (in millions) + 7% Sales Adjusted EBITDA 7 - 4% 17.0% +180 bps * * * Adjusted EBITDA Margin % • Year over year demand continues to improve for the segment but slowly due to continued weakness in Europe • Raw material deflation & cost reduction actions primary drivers of adjusted EBITDA growth and margin expansion of +180 bps vs Q1 2023 Q1 2024 SEGMENT PERFORMANCE (SPECIALTY ENGINEERED MATERIALS) $310 $314 Q1 23 Q1 24 $64 $73 Q1 23 Q1 24 23.2% Sales Adjusted EBITDA (in millions) (in millions) + 14% Sales Adjusted EBITDA 8 + 1% 20.8% +240 bps * * * Adjusted EBITDA Margin % • Sales growth in defense end market offset by weaker demand in telecommunications end market • Raw material deflation and favorable mix impact from defense sales primary drivers of adjusted EBITDA growth and margin expansion of +240 bps vs Q1 2023 Q1 EBITDA BRIDGE (TOTAL COMPANY) 9 $ millions CAI: Price / Mix (1) Deflation 16 SEM: Price / Mix 4 Deflation 7 Net Price Benefit 26 Wage/Other Inflation (9) FX (2) Q1 2024 $143 Adjusted EBITDA Q1 2023 $ 134 Demand (6) • Positive net price benefit: o Favorable raw material deflation in both segments • Wage and other inflation more than offset cost reductions/synergies 2024 G U I DAN CE FY 2024 GUIDANCE Original Revised Adjusted EBITDA $505 to $535 million $510 to $535 million Adjusted EPS $2.40 to $2.65 $2.50 to $2.65 Interest Expense $105 to $110 million $105 million Adjusted Effective Tax Rate 23% to 25% 23% to 25% Capital Expenditures ~$140 million ~$140 million 11 Q2 2024: Adjusted EPS of $0.71 CE O “ TO P O F MI N D” FO CU S ARE AS AREAS OF FOCUS 13 +7% Drive Profitable Organic Top-Line Growth with Margin Expansion Amplify Innovation Build Leadership & Talent Pipeline AP P E N DI X 16 Performance Additives 15% Pigments 13% TiO2 9% Dyestuffs 2% Polyethylene 10%Nylon 5% Polypropylene 4% Styrenic Block Copolymer 4% Other Raw Materials 38% ~40% hydrocarbon based (Grey shaded materials are hydrocarbon based, includes portion of “Other Raw Materials”) Non-hydrocarbon based materials RAW MATERIAL BASKET SEGMENT DATA U.S. & Canada 41% EMEA 36% Asia 18% Latin America 5% 2023 SEGMENT, END MARKET AND GEOGRAPHY GEOGRAPHY REVENUESEGMENT FINANCIALS Consumer 19% Packaging 23%Industrial 16% Building and Construction 9% Telecommunications 4% Energy 5% Defense 7% END MARKET REVENUE $2,007M $358M $1,138M $224M Sales EBITDA Specialty Engineered Materials Color Additives and Inks $502M$3,143M (1) Transportation 10% Healthcare 7% 18 (1) Total company sales and adjusted EBITDA of $3,143M and $502M, respectively, include intercompany sales eliminations and corporate costs 2023 REVENUE | $2 .0 BILLION US & Canada 34% EMEA 37% Asia 21% Latin America 8% END MARKET REGION 19 Packaging 34% Consumer 21% Healthcare 8% Industrial 15% Transportation 9% Building & Construction 10% Telecommunications 1% Energy 2% COLOR, ADDITIVES & INKS 2023 REVENUE | $1 .1 BILLION US & Canada 52% EMEA 35% Asia 13% 20 Packaging 5% Consumer 16% Healthcare 6%Industrial 16% Transportation 12% Telecommunications 9% Energy 10% Defense 18% Building & Construction 8% END MARKET REGION SPECIALTY ENGINEERED MATERIALS Packaging 32% Consumer 26% Healthcare 9% Industrial 13% Building & Construction 6% Telecommunications 2% Energy 2% Defense 1% Asia (18% of sales) Transportation 9% 2023 AVIENT REGIONAL SALES Packaging 25% Consumer 13% Healthcare 5% Industrial 18% Building & Construction 9% Energy 5% Defense 8% EMEA (36% of sales)Transportation 13% Packaging 13% Consumer 22% Healthcare 10% Industrial 16% Building & Construction 12% Energy 6% Defense 8% US & Canada (41% of sales) Transportation 9% Packaging 59% Consumer 22% Healthcare 2% Industrial 8% Building & Construction 4% LATAM (5% of sales) Transportation 5% Telecommunications 4% Telecommunications 4% 21 BY END MARKET Reconciliation of Non-GAAP Financial Measures (Unaudited) (Dollars in millions, except for per share data) Senior management uses comparisons of adjusted net income from continuing operations attributable to Avient shareholders and diluted adjusted earnings per share (EPS) from continuing operations attributable to Avient shareholders, excluding special items, to assess performance and facilitate comparability of results.

IATF Certificate Place and date: For the issuing office: Katy, TX, 10 December 2024 Revision 2 DNV - Business Assurance 1400 Ravello Drive, Katy, TX, 77449- 5164, USA Sherif Mekkawy Management Representative Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid. ACCREDITED UNIT: DNV Business Assurance USA Inc., 1400 Ravello Drive, Katy, TX, 77449-5164, USA - TEL: +1 281-396-1000. www.dnv.com Page 1 of 2 MANAGEMENT SYSTEM CERTIFICATE Certificate no.: 273138-2018-AQ-RGC-IATF IATF Certificate No: 0558323 Valid: 10 December 2024 – 09 December 2027 This is to certify that the management system of Polyone - Shenzhen Co., Ltd. ACCREDITED UNIT: DNV Business Assurance USA Inc., 1400 Ravello Drive, Katy, TX, 77449-5164, USA - TEL: +1 281-396-1000. www.dnv.com Page 2 of 2 Appendix to Certificate Polyone - Shenzhen Co., Ltd.