BASE RESIN ABS Drying Temperature 80–90°C Drying Time 2–3 Hours Barrel Temperatures °C Rear Zone 180–210 Center Zone 190–220 Front Zone 200–230 Nozzle 210–240 Mold Temperature 50–80 Screw Speed Moderate Back Pressure 3–10 bar Cushion 5–15 mm Injection Speed Low to medium Injection Pressure Moderate to high Holding Pressure 10–30% of injection pressure Screw Type General purpose Screw L/D 20:1 Screw Compression Ratio 2.0:1–2.5:1 Non-return Check Valve Free flow check ring Nozzle Type Reverse taper Barrel Capacity 30–80% of barrel should be used STARTUP & SHUTDOWN RECOMMENDATIONS Purge Compound 2–3 melt flow PP or purging compound.

IMPROVED BOTTLE QUALITY +2% in neck +3% in body -12% in base 8.5g 0.5L bottle, 60% rPET Re-optimization of Polymer Weight Distribution to Improve Bottle Strength Based on commercially produced water bottles, 51,000bph Mechanical Strength Based on PTI 14.4g 0.5L water bottles, Instron testing To p Lo ad (l bs Burst Pressure Based on 8.5g, 0.5L commercially produced water bottles Bu rs t P re ss ur e (B ar REDUCED CO2 EMISSIONS 25% reduction in energy consumed during the bottle blowing process, based on a commercial process producing 8.5g 0.5L water bottles at 51,000 bph En er gy k W Reduced Energy Consumption ColorMatrix AAzure increases the heat-up rate for preforms, enabling energy reductions for the heating lamps used during the bottle blowing process. Translates to 25% CO2 reduction based on 25% energy reduction in bottle blowing process CO 2 (t on ne s p er y ea r) ColorMatrix AAzure products are supplied in ColorMatrix approved packaging and are active as supplied.

KEY PROPERTIES AND PERFORMANCE FR GRADES H GRADES PEEK GRADES LCP GRADES FLEX GRADES PROPERTIES CONDITION ISO UNIT PPE400FR PPE700FR PPE950FR PPE1200FR H1500HF H2300HF PEEK700 PEEK900 PEEK1000 PEEK1200 LCP650 LCP800 LCP950 FLX400 FLX700 FLX1100 Dielectric Constant (Dk) 2.4 GHz 4.0 7.0 9.5 12.0 15.0 23.0 7.0 9.0 10.0 12.0 6.5 8.0 9.5 4.0 7.0 11.0 Loss Tangent (Df) 2.4 GHz 0.0030 0.0039 0.0042 0.0045 0.0010 0.0037 0.0024 0.0025 0.0024 0.0027 0.0043 0.0045 0.0047 0.0010 0.0009 0.0012 Density 1183 g/cm3 1.44 1.97 2.20 2.50 2.60 3.40 1.94 2.20 2.30 2.40 2.00 2.15 2.30 1.52 1.93 2.50 Melt Flow Index (MFI) 5 kg, 300 °C (unless noted) 1113 g/10 min 17 12 13 5 5 8 15 @ 380 °C 13 @ 380 °C 10 @ 380 °C 6 - - - 11 @ 230 °C 2 @ 230 °C 0.3 @ 230 °C Tensile Strength at Break 23 °C/73 °F 527 MPa 47 52 44 45 23 40 64 62 65 67 75 80 75 11 17 25 Flexural Modulus 23 °C/73 °F 178 MPa 3100 4500 - 9300 2100 5000 6200 7600 9200 11000 8000 8500 8500 1400 1600 2900 Unnotched Izod 23 °C/73 °F 180 kJ/m2 NB 42 20 9 17 10 28 25 18 15 31 20 12 NB NB NB -20 °C/-4 °F 180 kJ/m2 - - - - 17 10 - - - - - - - - - Notched Izod 23 °C/73 °F 180 kJ/m2 14 6 4 3 5 4 6 4 4 4 10 6 4 59 23 13 -20 °C/-4 °F 180 kJ/m2 - - - - 5 4 - - - - - - - - - - STANDARD GRADES RADOME GRADES PROPERTIES CONDITION ISO UNIT PPE260 PPE300 PPE320 PPE350 PPE400 PPE440 PPE500 PPE650 PPE800 PPE950 PPE1200 RS260 RB260 RS265FR Dielectric Constant (Dk) 2.4 GHz 2.6 3.0 3.2 3.5 4.0 4.4 5.0 6.5 8.0 9.5 12.0 2.6 2.6 2.7 Loss Tangent (Df) 2.4 GHz 0.0009 0.0009 0.0010 0.0009 0.0009 0.0009 0.0009 0.0009 0.0009 0.0009 0.0010 0.0009 0.0012 0.0032 Density 1183 g/cm3 1.07 1.18 1.21 1.27 1.43 1.50 1.62 1.86 2.10 2.20 2.40 1.06 1.08 1.09 Melt Flow Index (MFI) 5 kg, 300 °C 1113 g/10 min 15 15 16 14 14 14 15 11 10 4 2 21 16 25 Tensile Strength at Break 23 °C/73 °F 527 MPa 40 45 47 50 50 48 45 43 37 37 36 50 42 52 Flexural Modulus 23 °C/73 °F 178 MPa 2700 2400 2000 2600 2800 2700 2600 2600 2300 2600 2600 2200 2200 2600 Unnotched Izod 23 °C/73 °F 180 kJ/m2 NB NB NB NB NB NB NB NB 50 28 24 NB NB NB -20 °C/-4 °F 180 kJ/m2 NB NB NB NB NB NB NB 50 47 27 25 NB NB NB Notched Izod 23 °C/73 °F 180 kJ/m2 8 55 69 35 22 20 15 9 8 5 4 19 14 11 -20 °C/-4 °F 180 kJ/m2 8 15 20 14 12 10 9 8 8 5 4 10 12 10 PREPERM™ SERIES PROPERTIES CONDITION ISO UNIT 8027 8025 8037 8019 8028 8026 8044 8029 8041 8045 8048 8036 8056 8031 Dielectric Constant (Dk) 1 GHz, 23 °C 3.0 3.1 3.4 3.6 3.8 4.4 4.8 5.3 5.4 5.9 6.0 7.0 7.3 9.0 Loss Tangent (Df) 1 GHz, 23 °C 0.0012 0.0012 0.0008 0.0010 0.0010 0.0010 0.0004 0.0008 0.0006 0.0002 0.0006 0.0007 0.0002 0.0007 Density 1183 g/cm3 1.25 1.26 1.35 1.39 1.45 1.59 1.72 1.75 1.79 1.89 1.88 2.06 2.086 2.25 Melt Flow Index (MFI) 5 kg, 300 °C 1113 g/10 min 16 19 10 11 15 13 10 10 15 15 19 10 18 4.7 Tensile Strength at Break 23 °C/73 °F 527 MPa 59 54 54 62 59 54 52 58 52 45 49 45 37 38 Flexural Modulus 23 °C/73 °F 178 MPa 2780 2560 2850 3060 3350 3700 3157 4300 4320 3137 4150 3370 2560 4200 Notched Izod 23 °C/73 °F 180 kJ/m2 15.3 14 14.8 14 12.6 10.4 9.9 8.6 7.4 7.9 6.6 7.1 6.2 6.8 EDGETEK™ 7600 SERIES Copyright © 2021, Avient Corporation.

Log in to ColorMatrix Select and input your product specification. 2. Your colors can be consistently reproduced from any Avient facility worldwide. 1 2 VISIT ONE OF OUR SELECT FACILITIES Alternatively, you can visit one of our global Select development facilities and work with one of our experts to create your color, produce and approve samples all in the same day.

所有产品均符 合OEKO-TEX® 100-2标准，不含增塑剂，且 VOC含量低于传统胶水。 ™ 产品公告 市场和应用 Versaflex TF TPE热熔胶解决方案专为以下应用 而设计: 主要特性 柔软舒适、回弹力强 与涤纶和尼龙织物紧密无缝粘合 通过OEKO-TEX 100-2测试 在高达60°C水温下具有出色的耐洗性 无毒配方，VOC含量低且不含增塑剂 是TPU胶膜和传统胶水的理想替代品 内衣弹性带 运动和健身服饰中的接缝带 1.844.4AVIENT www.avient.com 版权所有©2024 埃万特公司。

CHF) Ei Ae Lö Stammanteile Gesellschafter (siehe Personalangaben) Ei Lö Domiziladresse 1 30'804'000.00 2 21'563 x 1'000.00 9'241x 1'000.00 Colormatrix Holdings, lnc. (41 42456) PolyOne Europe Finance S.ä.r.1. I SHAB Arlesheim, 04.1 2.2O2O 07 :34 Fortsetzung auf der folgenden Seite Handelsregisteramt des Kantons Basel-Landschaft BASEL LANDSCHAFT Jlt cHE-112.279.714 Avient Switzerland GmbH Muttenz 2 Alle Eintragungen Ref TR-Nr TR-Datum SHAB SHAB-Dat.

IMPROVED BOTTLE QUALITY +2% in neck +3% in body -12% in base 8.5g 0.5L bottle, 60% rPET Polymer Weight Distribution Based on commercially produced water bottles, 51,000bph Mechanical Strength Based on PTI 14.4g 0.5L water bottles, Instron testing To p Lo ad (l bs ) Burst Pressure Based on 8.5g, 0.5L commercially produced water bottles Bu rs t P re ss ur e (B ar ) REDUCED CO2 EMISSIONS Based on a commercial process producing 8.5g 0.5L water bottles as 51,000bph 25% reduction in energy consumed during the bottle blowing process En er gy k W Reduce Energy Consumption SmartHeat RHC increases the heat-up rate for preforms, enabling energy reductions for the heating lamps used during the bottle blowing process. Translates to 25% CO2 reductions based on energy savings reducing CO2 emissions by 114 tonnes per year on one commercial blowing line CO 2 (t on ne s) SmartHeat RHC products are supplied in ColorMatrix™ approved packaging and are active as supplied.

Bob Patterson Chairman, President, and CEO February 2, 2022

Müller, CEO SQS 66 70 _2  / J un e 20 19  / V er si on 2 .0 A.

WIRE &CABLE COMPANY O P T I C A L C A B L E S H E A T H • Excellent resistance to fungi and mildew • Good UV resistance • Meet flame retardant standard IEC 60332-3C • Provided an anti-fungi solution with an ISO 846 rating of 0, showing no growth under microscope • Formulated solution to meet flammability performance demands for IEC60332-2 or GBT 18380.22-2008 compliance • Complied with Biocidal Product Regulation (EU) No528/2012 (BPR) ECCOH™ Thermoplastic Formulation KEY REQUIREMENTS WHY AVIENT?