Garratt’s chemical career began with The Dow Chemical Company, where he served in commercial and marketing roles in Canada and the United States.

TRACTOR TRAILER OEM C A R G O T R A I L E R S I D E W A L L S • Suitable CFA design for PE sheet extrusion in layered, metal-laminated inner sidewall panels • Improved fuel economy and reduced trailer tare weight • Uncompromised outdoor durability and part strength • Reduced polymer usage while maintaining physical and dimensional requirements • Delivered significant 20% part weight reduction with CFA solution • Provided formulation to enhance throughput, leading to a 43% overall cost reduction • Created value beyond initial technical challenge with a credible problem solving approach • Enhanced performance with excellent sidewalls, uniform foamed plastic core, superior flatness, and rigidity Hydrocerol™ Chemical Foaming Additives (CFAs) and Cesa™ Nucleant Additives KEY REQUIREMENTS WHY AVIENT? All Rights Reserved. https://www.avient.com/products/polymer-additives/foaming-agents/hydrocerol-solid-chemical-foaming-and-nucleating-agents

No. 0514.02) Revised 10/08/2019 Page 1 of 2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 POLYMER DIAGNOSTICS INC. 33587 Walker Road Avon Lake, OH 44012 Ana De La Ree Phone: 440-930-3271 CHEMICAL Valid To: December 31, 2019 Certificate Number: 0514.02 In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following rubber and plastics tests: Test Description: Test Method or Standard: Analysis of Volatile Contaminants from Polymers (Chromatography) VDA 277 FTIR (Fourier Transform Infrared) Spectroscopy ASTM E1252 (Except 7.6, 11.2, and 11.4) Flammability Horizontal Burn of Self-Supporting Plastics ASTM D635; UL 94; IEC 60695-11-10 Horizontal Burn of Materials Used in Occupant Compartments of Motor Vehicles ASTM D5132; FMVSS 302 (49 CFR 571.302) Vertical Burn, 20 mm ASTM D3801; UL 94; IEC 60695-11-10 Vertical Burn, 125 mm ASTM D5048; UL 94; IEC 60695-11-20 Oxygen Index ASTM D2863 FT1 Flame Test UL1581, Clause 1060; UL2556/CSA C22.2 No 2556, Clause 9.3 Cable Flame Test UL1581, Clause 1061 VW1 Flame Test UL1581, Clause 1080; UL2556/CSA C22.2 No 2556, Clause 9.4 FT2/FH Flame Test UL1581, Clause 1100; UL2556/CSA C22.2 No 2556, Clause 9.1 FV-1 Flame Test UL1581, Clause 1060; UL2556/CSA C22.2 No 2556, Clause 9.5 Thin Material Burning Test UL-94 Glow Wire Test IEC 60695 2-10, 2-11, 2-12, 2-13 RVCM in PVC ASTM D4443 (A2LA Cert. Please verify this organization’s acceptance status by using the CPSC’s searchable database, located at http://www.cpsc.gov/cgi-bin/labsearch/. http://www.cpsc.gov/cgi-bin/labsearch/ For the tests to which this accreditation applies, please refer to the laboratory’s Chemical Scope of Accreditation. Avon Lake, OH for technical competence in the field of Chemical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories.

No. 0514.02) Revised 09/21/2021 Page 1 of 2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 POLYMER DIAGNOSTICS INC. 33587 Walker Road Avon Lake, OH 44012 Ana De La Ree Phone: 440-930-3271 CHEMICAL Valid To: December 31, 2021 Certificate Number: 0514.02 In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following rubber and plastics tests: Test Description: Test Method or Standard: Analysis of Volatile Contaminants from Polymers (Chromatography) VDA 277 FTIR (Fourier Transform Infrared) Spectroscopy ASTM E1252 (Except 7.6, 11.2, and 11.4) Flammability Horizontal Burn of Self-Supporting Plastics ASTM D635; UL 94; IEC 60695-11-10 Horizontal Burn of Materials Used in Occupant Compartments of Motor Vehicles ASTM D5132; FMVSS 302 (49 CFR 571.302); ISO 3785 Vertical Burn, 20 mm ASTM D3801; UL 94; IEC 60695-11-10 Vertical Burn, 125 mm ASTM D5048; UL 94; IEC 60695-11-20 Oxygen Index ASTM D2863 FT1 Flame Test UL1581, Clause 1060; UL2556/CSA C22.2 No 2556, Clause 9.3 Cable Flame Test UL1581, Clause 1061 VW1 Flame Test UL1581, Clause 1080; UL2556/CSA C22.2 No 2556, Clause 9.4 FT2/FH Flame Test UL1581, Clause 1100; UL2556/CSA C22.2 No 2556, Clause 9.1 FV-1 Flame Test UL1581, Clause 1060; UL2556/CSA C22.2 No 2556, Clause 9.5 Thin Material Burning Test UL-94 Glow Wire Test IEC 60695 2-10, 2-11, 2-12, 2-13 RVCM in PVC ASTM D4443 (A2LA Cert. Please verify this organization’s acceptance status by using the CPSC’s searchable database, located at http://www.cpsc.gov/cgi-bin/labsearch/. http://www.cpsc.gov/cgi-bin/labsearch/ For the tests to which this accreditation applies, please refer to the laboratory’s Chemical Scope of Accreditation. Avon Lake, OH for technical competence in the field of Chemical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories.

HEALTHCARE DEVICE OEM C O N T I N U O U S G L U C O S E M O N I T O R • Specific color matching for brand alignment and recognition • Chemically resistant material to help product last longer • Single source for materials and color expertise • Provided a pre-colored solution that met rigorous application requirements to improve color consistency between products • Incorporated scratch & mar resistant additives for improved durability • Offered the ability to run small pilot lots • Met regulatory requirements for USP Class VI Trilliant™ HC Thermoplastics KEY REQUIREMENTS WHY AVIENT? All Rights Reserved. https://www.avient.com/products/engineered-polymer-formulations/chemical-corrosion-resistant-formulations/trilliant-hc-healthcare-thermoplastics

Excelite OnePager Putty Knife PUTTY KNIFE MANUFACTURER N O R T H A M E R I C A • Reduce current scrap rate of 30% • Eliminate prominent sink marks • Minimize random short shots • Reduced scrap rate to 1% • Eliminated sink marks • Improved mold fill • Improvement in cell structure increased cell density and dimensional stability during critical cooling time Excelite™ IM Chemical Foaming Additives KEY REQUIREMENTS* WHY AVIENT? All Rights Reserved. https://www.avient.com/products/polymer-additives/foaming-agents/colormatrix-excelite-chemical-foaming-additives

BIOPHARMACEUTICAL SUPPLY COMPANY T U B I N G C L A M P • High impact and wear resistance • Low moisture uptake • Comparable dimensional stability to nylon • Eco-conscious alternative to PA66 and PA6 • Delivered a comparable alternative to nylons during supply shortages, resulting in rugged performance and a lower carbon footprint • Provided improved chemical resistance to nylon clamps to withstand repeated cleanings from harsh disinfectants • Offered a global manufacturing footprint to support future expansion of the end products to markets outside the Americas Trilliant™ HC 8910 Glass-Filled Polyketone Thermoplastics KEY REQUIREMENTS WHY AVIENT AVIENT SOLUTION DURABILITY + MATERIAL AVAILABILITY LEARN MORE Copyright © 2023, Avient Corporation. All Rights Reserved. https://www.avient.com/products/engineered-polymer-formulations/chemical-corrosion-resistant-formulations/trilliant-hc-healthcare-thermoplastics

SURGICAL INSTRUMENT OEM T I B I A L T R I A L S • Offered in various colors for ease of brand identification and sizing differentiation • Able to withstand repeated steam sterilization and chemical disinfection • Available in low minimum order quantities (MOQ) • Delivered a variety of bright, differentiating color choices • Maintained excellent mechanical performance after repeated steam sterilization and harsh chemical cleaning • Offered low MOQ with flexible supply Transcend™ Premier Healthcare Colorants KEY REQUIREMENTS WHY AVIENT?

Vapor honing, sand or bead blasting and chemical etching may also be used to produce surfaces with varying degrees of gloss and appearance. Vapor honing, sand or bead blasting and chemical etching may also be used to produce surfaces with varying degrees of gloss and appearance. The most common color concentrate carrier is PP because it is compatible with many commercially available TPE products (for both single component molding and overmolding PP applications).

Khandpur holds a Bachelor’s of Technology degree in Chemical Engineering from the Indian Institute of Technology, Delhi and a Ph.D in Chemical Engineering from the University of Minnesota.