% ASTM D570 0.8 – 0.050–1.0 0.3 0.4 0.4 0.050 – 0.050 – – – Mechanical Properties Tensile Modulus(1) MPa ASTM D638 2650 9650 9790 8050 7380 1250 965 1770 2420 8620 4140 – Tensile Strength(1) (Yield) MPa ASTM D638 61.4 119 122 119 94 47 35 40 45 108 72.4 90 Tensile Elongation(1) (Break) % ASTM D638 3.0–5.0 1.0–3.0 1.5 3 2 35 40 30 26 3 – – Flexural Modulus MPa ASTM D790 2760 6890 6890 7380 6410 1300 1080 1740 1790 6690 4840 5500 Flexural Strength MPa ASTM D790 108 172 214 182 167 55 41.4 62.7 68.3 165 110 130 Coefficient of Friction ASTM D1894 vs. Steel – Static 0.25 0.46 0.18 0.15 0.12 0.19 0.11 0.14 0.13 0.24 0.17 0.17 Impact Notched Izod Impact (23°C, 3.18 mm, Injection Molded) J/m ASTM D256A 41 64(6) 110 107 107 70 80 37 37 75 – 69 Thermal Properties Heat Deflection Temperature ASTM D648 0.45 MPa °C 215(6) – 250 215 216 184 152 151(6) 153(6) 218(6) – – 1.8 MPa °C 65(6) 239(7) 244(6) 210 210 75 94 81.1(6) 88 197(6) – 135(5) Electrical Properties Surface Resistivity ohms/sq ASTM D254 – – – 1.30x1012 1.9x1012 5.2x1012 – – – – – 1.0x109 Dielectric Strength (Short Time) kV/mm – – 8.5 – – – – – – – – – Flammability Flame Rating Class UL 94 HB – – HB HB HB – HB – – – – LubriOne™ Internally Lubricated Formulations NOTES (1) Type I, 5.1mm/min (2) Type I, 21.3 mm/min (3) Type I, 50 mm/min (4) Type I, 5.1mm/min, Break (5) 3.2 mm thick, Unannealed (6) 6.35 mm thick, Unannealed (7) 3.2 mm thick, Annealed PRODUCT DESCRIPTION UNITS TEST METHOD 5024 RS HI 5021 RS S1 5021 RS X2 5019 X1 LB6700- 5001 RS AF Black NN- 000/01M Black SO REC LB6600- 5030 RS Grey LB3300- 5010 RS LB3300- 5005 RS REC LB3220- 5001 RS C Natural X1 5010 GP Grey 5006 RS PE 5004 RS PE LB4200- 5022 Black LB4200- 5023 Base Polymer PA 6 PA6/PA66 PA66 PBT PC PKE POM Lubricant UHMWPE1 UHMWPE UHMWPE UHMWPE UHMWPE MoS22 Graphite UHMWPE UHMWPE UHMWPE Graphite UHMWPE UHMWPE MoS2 UHMWPE Filler type GF10 GF30 GF30 GF50 GF50 Unfilled GF33 GF20 MI20 GF10 Unfilled GF20 GF30 Unfilled Unfilled General Properties Specific Gravity g/cm3 ISO 1183 1.18 1.35 1.39 1.55 1.58 1.14 1.44 1.42 1.46 1.23 1.26 1.34 1.43 1.4 1.35 Mechanical Properties Tensile Modulus (23°C) MPa ISO 527-1 4250 9500 9000 15500 16600 3500 10600 6300 3330 4000 1630 5300 9250 2470 2150 Tensile Strength (Yield, 23°C) MPa ISO-527-2 97 150 160 205 200 85 164 102 55 60 60 108 99.1 55 50 Tensile Elongation (Break, 23°C) % ISO-527-2 12 2.5 3 2.7 2.4 3.4 2.0 4.2 8 2.5 46 3.7 1.5 11 11 Flexural Strength (23°C) MPa ISO 178 103 – – 285 265 108 215 127 78 85 38 155 117 73 68 Flexural Modulus (23°C) MPa ISO 178 3250 – – 12400 11100 2690 9000 4700 3000 3100 1380 4600 5450 2210 2070 Impact Charpy Notched Impact Strength (23°C, Injection Molded) kJ/m^2 ISO 179 14 12 10 15 10 3 6 7.7 4.3 12 15 10 7.6 8 5 Charpy Unnotched Impact Strength (23°C, Injection Molded) kJ/m^2 ISO 179 82 55 61 75 60 65 50 47 69 - NB 63 36 NB NB Thermal Properties Deflection Temperature Under Load 1.8 Mpa, Unannealed °C ISO 75-2/A 107 – – 204 – 73 235 – – – 90 210 204 86 80 Cofficient of Friction (CoF) & Wear Rate CoF vs.

VERSAFLEX™ PF Camada de aderência para para películas protetoras de superfície BOLETIM TÉCNICO Propriedades Versaflex PF MD6727 Versaflex PF DM6741 Versaflex PF DM6649 Versaflex PF 9512 Versaflex PF MD6666 Versaflex PF DM6748 Versaflex PF DM6700 Características Baixa aderência Baixa aderência; usado para personalizar aderência com MD6700 Aderência de baixa a média Oferta de valor Aderência média Gel/resíduos baixos Estrutura de baixa aderência Alta aderência Resistência a descolamento Baixa Baixa a média Média Média a alta Média a alta Alta Alta Aplicações Películas ópticas Eletrodomésticos Plásticos Construção/metais expostos Metais acabados Aço/metais pintados Metais expostos MFR a 190 °C/2,16 kg -- 4,5 17 5,4 21 4,8 6,5 MFR a 230 °C/2,16 kg 10 20 -- -- -- -- -- Gravidade específica, g/cc 0,92 0,91 0,92 0,92 0,94 0,94 0,94 Dureza, Shore A 50 49 37 38 37 31 30 G' a 23°C, Pa 28,0 x 105 10,4 x 106 8,3 x 105 -- 9,9 x 105 11,8 x 105 10,0 x 105 DMA Tg, °C -29 -30 -9 10 11 15 21 Película LDPE/Versaflex PF1 Descolamento de 180°, N/25 mm Aço inoxidável após 20 min a 25 °C 0,5 2,2 3,2 6,1 6,7 8,5 8,6 após 7 dias a 25°C 0,6 2,7 4,3 5,5 8,2 8,3 10,3 PMMA2 após 20 min a 25 °C 1,1 1,7 3,8 4,9 6,9 8,3 8,8 após 20 min a 75 °C 2,8 4,1 5,1 6,9 9,0 10,7 11,8 após 7 dias a 75°C 4,0 4,4 5,9 9,8 8,4 9,8 10,3 Policarbonato3 após 20 min a 25 °C 1,4 2,2 3,8 6,8 6,3 8,4 7,0 após 20 min a 75 °C 3,4 4,8 6,7 8,8 8,8 10,0 11,8 após 7 dias a 75°C 4,6 6,5 7,5 10,6 11,6 10,6 13,8 1 Espessura da película: LDPE 51 mícrons/Versaflex PF 25 mícrons 2 Arkema Plexiglas™ V052-100 (Plexiglas é uma marca comercial da Arkema France Corp). 3 Sabic Lexan™ L52-111 (Lexan é uma marca comercial da Sabic Innovative Plastics) PROPRIEDADES FÍSICAS DE FORMULAÇÕES DE CAMADA DE ADERÊNCIA VERSAFLEX PF SELECIONADAS DESCRIÇÃO DO PRODUTO As formulações Versaflex™ PF são especialmente desenvolvidas para a fabricação de películas protetoras de superfície coextrudadas de fácil aplicação, mantêm a aderência com espessura mínima, descolam suavemente e são removidas completamente, sem nenhum ou com pouco resíduo. OS BENEFÍCIOS DO VERSAFLEXTM PF PARA PELÍCULAS PROTETORAS DE SUPERFÍCIE: • Aderência personalizável • Processo de fabricação de etapa única (coextrusão) • Baixas emissões de compostos orgânicos voláteis (COV) durante a fabricação • Elimina operações secundárias de revestimento e secagem • Elimina produtos químicos líquidos perigosos em comparação com os sistemas de solventes • Reduz custos de conversão em comparação com revestimento • Reduz o consumo de energia MERCADOS E APLICAÇÕES As formulações Versaflex PF, personalizáveis com base no nível desejado de aderência, são coextrudadas com películas protetoras para fornecer apenas a quantidade certa de proteção durante a fabricação, montagem, envio, armazenamento e instalação de produtos acabados em muitas indústrias e aplicações de uso final, incluindo: • Películas ópticas e painéis de exibição de eletrônicos para o consumo • Eletrodomésticos • Construção e materiais de construção • Móveis e armários • Automotivo e outros transportes 100/0 90/10 80/20 70/30 60/40 40/60 30/70 20/80 10/90 0/100 0,9 1,1 2,0 2,4 2,8 3,7 3,8 4,9 0 1 2 3 4 6 7 8 6,5 1,6 MD6727 MD6748 MD6700 MD6666 9512 MD6649 MD6741 0 2 4 6 8 10 12 % de MD6741/MD6700 O grau de aderência pode ser personalizado para superfícies de substrato. PERSONALIZAÇÃO DA ADERÊNCIA POR MEIO DE COMBINAÇÕES DE VERSAFLEX PF Espessura da película: 39 mícrons LDPE/13 mícrons Versaflex PF F = Aderência final após 7 dias a 25° C i = Aderência inicial após 20 minutos a 25° C Re si st ên ci a a de sc ol am en to e a ço , N /2 5 Re si st ên ci a a de sc ol am en to e a ço , N /2 5 RESISTÊNCIA A DESCOLAMENTO EM AÇO INOXIDÁVEL Espessura da película: LDPE 51 mícrons/Versaflex PF 25 mícrons www.avient.com Copyright © 2020, Avient Corporation.

PP OVERMOLDING HARDNESS REGULATORY STERILIZATION CHARACTERISTICS Dynaflex™ G2706 28A USP Class VI, ISO 10993, Food contact EtO Soft translucent grade, grippy feel Dynaflex™ G2711 43A USP Class VI, ISO 10993, Food contact EtO Highly colorable solution, grippy feel, low compression set Versaflex™ CL2242 & CL2250 42A/ 50A USP Class VI, ISO 10993, US Food contact EtO Clear boilable grades; ABS, PC bondable Versaflex™ G2705 N 60A USP Class VI, ISO 10993, Food contact EtO/Steam High resilience, low compression set Versaflex™ HC3810 20A-90A USP Class VI, ISO 10993 EtO General purpose, unfilled ABS, PC OVERMOLDING HARDNESS REGULATORY STERILIZATION CHARACTERISTICS Versaflex™ OM1040 40A USP Class VI, ISO 10993 EtO Translucent Versaflex™ OM3060 60A USP Class VI, ISO 10993 EtO Clear VERSAFLEX™ CL AND DYNAFLEX™ TPEs OVERMOLDING FOR ERGONOMICS • Adds good tactile surface with soft-touch feel • Available in a variety of color effects and textures • Improves grip, cushion, and comfort • Enhances functional performance like sealing properties, vibration damping, oxygen barrier, and scratch and abrasion resistance • Reduces assembly costs, good processability • Offers excellent adhesion to a wide range of substrates • Glucometers • Medical tools overmolds • Injector pens • Analysis devices VERSALLOY™ HC & VERSAFLEX™ HC TPEs SEALING & RESEALING • Rubbery feel and soft touch • No coring, good puncture, and resealability in static stoppers • Meets low coefficient of friction requirements in dynamic seals • Low extractables • Suitable to overmold onto polyolefins • Sealing and resealing septum • Seals and sanitary gaskets • Syringe plungers and tips MATERIAL DESCRIPTION HARDNESS REGULATORY STERILIZATION CHARACTERISTICS Versalloy™ HC 9210-45N 45A USP Class VI EtO Good processability, HC 9210-55N 55A USP Class VI EtO Good processability, HC 9210-70N 70A USP Class VI EtO Good processability, HC 9220-43N 43A USP Class VI, ISO 10993-4/5 EtO Extrusion grade, high temperature resistance Versaflex™ HC 2110-35N 34A FDA, USP Class VI, ISO 10993 Autoclave EtO radiation Resealing, elevated comp set Versaflex™ HC 2110-57B 57A FDA, USP Class VI, ISO 10993 Autoclave EtO radiation Low stiction VERSAFLEX™ CL AND DYNAFLEX™ TPEs HIGH CLARITY GRADES WITHOUT PLASTICIZERS • Water clear grades formulated without phthalate plasticizers • Meets medical regulatory USP Class VI and ISO 10993-4,5 • Food contact and FDA compliant • Autoclave and radiation stable • Low extractable • High clarity (Haze 50 4.1, 100 4.5, 100 4, 70 6, 70 Tensile Modulus (MPa) 2200 2700 2600 2350 1820 1820 Flexural Strength (MPa) 80 90 104 86 68 68 Flexural Modulus (MPa) 2500 2700 2500 2300 1980 1590 HDT: 0.45, 1.8 (MPa) 110, 80 90, 80 100, 89 123, 100 123, 64 100, 70 UL-94 Rating @ 3.0 mm 5VA V-0 5VA V-0 HB V-0 UL-94 Rating @ 1.5 mm V-0 V-0 5VB V-0 HB V-0 UL-94 Rating @ 0.75 mm V-1 V-2 V-0 None None V-2 COMPETITIVE MATERIAL COMPARISON ENGINEERED POLYMER FORMULATIONS FOR HEALTHCARE TRILLIANT™ HC THERMOPLASTICS The family of Trilliant™ HC high-performance thermoplastics is formulated to meet the growing challenges of medical devices and equipment. MATERIAL DESCRIPTION BASE RESIN Trilliant™ HC2020 Copolyester Trilliant™ HC8910/8920 Polyketone/ABS blend Trilliant™ HC2120 Tritan Trilliant™ HC3120 PC Trilliant™ HC5210 PP Trilliant™ HC6010 PA6 Trilliant™ HC6610 PA66 Trilliant™ GRV-NP-110-W PA12 TRILLIANT™ HC THERMOPLASTICS • Chemically resistant replacement for FR PC/ABS, FR PC/PET & FR COPE, providing UL 94 Yellow Card V-0 flame rating at 1.5 mm, V-1 at 0.75 mm thicknesses for a broad color spectrum • Outperforms PC/ABS, PC/PET and COPE in resistance to common disinfectants • Retains tensile strength after 72-hour exposure to common hospital disinfectants, and shows better long-term chemical resistance as compared to PC blends and COPE • Exhibits good impact and temperature resistance • Available in natural grades, standard medical colors, or custom pre-colored products • Medical device housings • MRI, X-ray, CT scanner components • Surgical instruments such as staplers, dissectors, scissors • Auto-injector pen TRILLIANT™ HC ELECTRICALLY CONDUCTIVE FORMULATIONS • Consistent conductivity ensures repeatable part performance and minimizes failures related to inconsistent electrical conductivity • High flow and easy processing facilitate filling of thin wall parts and multiple cavity tools, which enable faster cycle times and lower per-unit part costs • Superior durability reduces breakage and resultant scrap related costs • Less tendency to flash results in improved appearance and less fluid retention in or on the tip, thus driving greater accuracy and less potential for cross-contamination • High strength produces parts with greater stiffness and warp resistance, again minimizing scrap-related costs • Conductive pipette tips TEST TEMS SPECIFIC GRAVITY MELT FLOW RATE (230OC, 2.16KG) TENSILE FLEXURAL FLEXURAL MODULUS IMPACT STRENGTH NOTCHED, IZOD SURFACE RESISTIVITY Method ASTM D-792 ASTM D-1238 ASTM D-638 ASTM D-790 ASTM D-790 ASTM D-256 ASTM D-257 Unit -- g/10min MPa MPa MPa J/m Ohms/sq. ST5200-8030 ESD BK001 1 5 27 52 1980 42 E3 ST5200-8035 ESD BK001 1 20 22 37 1460 150 E3 +86.21.60284888 www.avient.com Copyright © 2021, Avient Corporation.

No. 0514.02) Revised 09/21/2021 Page 1 of 2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 POLYMER DIAGNOSTICS INC. 33587 Walker Road Avon Lake, OH 44012 Ana De La Ree Phone: 440-930-3271 CHEMICAL Valid To: December 31, 2021 Certificate Number: 0514.02 In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following rubber and plastics tests: Test Description: Test Method or Standard: Analysis of Volatile Contaminants from Polymers (Chromatography) VDA 277 FTIR (Fourier Transform Infrared) Spectroscopy ASTM E1252 (Except 7.6, 11.2, and 11.4) Flammability Horizontal Burn of Self-Supporting Plastics ASTM D635; UL 94; IEC 60695-11-10 Horizontal Burn of Materials Used in Occupant Compartments of Motor Vehicles ASTM D5132; FMVSS 302 (49 CFR 571.302); ISO 3785 Vertical Burn, 20 mm ASTM D3801; UL 94; IEC 60695-11-10 Vertical Burn, 125 mm ASTM D5048; UL 94; IEC 60695-11-20 Oxygen Index ASTM D2863 FT1 Flame Test UL1581, Clause 1060; UL2556/CSA C22.2 No 2556, Clause 9.3 Cable Flame Test UL1581, Clause 1061 VW1 Flame Test UL1581, Clause 1080; UL2556/CSA C22.2 No 2556, Clause 9.4 FT2/FH Flame Test UL1581, Clause 1100; UL2556/CSA C22.2 No 2556, Clause 9.1 FV-1 Flame Test UL1581, Clause 1060; UL2556/CSA C22.2 No 2556, Clause 9.5 Thin Material Burning Test UL-94 Glow Wire Test IEC 60695 2-10, 2-11, 2-12, 2-13 RVCM in PVC ASTM D4443 (A2LA Cert. Avon Lake, OH for technical competence in the field of Chemical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated April 2017).

Lima, Peru 1. Combined, these facilities have a total of 205 certifications to an ISO or Management System and standards. Sustainability Report | 2020 67Sustainability Report | 2020 67 https://endplasticwaste.org/en/news?

MEVOPUR Amber for PET Pharma Pkg Application Bulletin_CN5.12-1 * 可根据要求提供 FDA/EU合规信息 应用公告 Mevopur™应用于药品包装的 医疗级琥珀色系着色剂和配方 埃万特时刻关注着医疗保健行业法规的演变，并 提前在这些法规生效之前开发合规产品。 主要特性 在四个通过ISO 13485认证的医疗生产线生 产，拥有全球统一的配方，提供一致性和供 应链保障 变更控制记录的不限于CAS编号级别，降低变 更风险 不含动物源性物质和邻苯二甲酸盐 不同的琥珀色色调，可根据要求定制—偏红色 或偏黄色，和/或颜色浅或深 适用于液体形式 法规支持 经过预测试的原材料： - ISO 10993-1和USP第、 部分（VI级） - 欧洲药典，，美国药典， 元素分析符合ICH Q3D - USP 溶液性状、颜色标准 FDA发布的注册药品主文件（III类） 食品接触符合FDA/EU*要求 符合YBB00102002-2015 (口服液体药用聚酯 瓶）标准 1.844.4AVIENT www.avient.com 适用医疗保健使用限制—见下文。

LoC No: 798019/2023 Page 1 of 1 Letter of Conformity Good Manufacturing Practices — Guidelines The Letter of Conformity is granted to Polyone Polymers India Private Limited Plot No. F -27, MIDC, Ranjangaon, Taluka – Shirur, Pune Maharashtra 412220 India Hold this Opinion Statement No. 798019/2023 The Organization has demonstrated that they have followed the guidelines provided for Good Manufacturing Practices as per the ICHQ7 guidelines in their organization for the following Business activity: Research and Development, Manufacture of Color additives, Concentrates and Specialty Formulations for intended use in pharma and other industries Theuns Kotze, Managing Director – IMETA Assurance Last Audit Date: 31.10.2023 BSI Group India Private Limited T: +91-4762-9000 (CIN U74899DL1999PTC101381 info.in@bsigroup.com The Mira Corporate Suites bsigroup.com/en-IN Plot 1&2, Ishwar Nagar, Mathura Road New Delhi-110065, India

POLYONE FRANCE TOSSIAT 43, PLACE DE LA GARE 01250 TOSSIAT FRANCE Bureau Veritas Certification France certify that the Management System of the above organization has been audited and found to be in accordance with the requirements of the management system standard detailed below: Standard ISO 14001:2015 Scope of certification THE DESIGN AND MANUFACTURE OF COLOUR AND ADDITIVE CONCENTRATES FOR THERMOPLASTICS Certification/Recertification Cycle Start Date: 03 May 2023 Subject to the continued satisfactory operation of the organization’s Management System, this certificate expires on: 02 May 2026 Expiry date of previous cycle: NA Certification/Recertification Audit date: 08 March 2023 Original Cycle Start Date: 15 July 2011 Certificate n°: FR081968-1 File n°:15608678 Revision date:24 April 2023 Laurent CROGUENNEC - President Local Office: Bureau Veritas Certification France Le Triangle de l'Arche - 9 Cours du Triangle - 92937 Paris La Défense Further clarifications regarding the scope of this certificate the applicability of the management system requirements may be obtained by consulting the organization. To check this certificate validity, please use the QR Code. 1/1

Avon Lake, OH for technical competence in the field of Chemical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated April 2017). Presented this 30th day of March 2018. _______________________ Vice President, Accreditation Services For the Accreditation Council Certificate Number 0514.02 Valid to December 31, 2019 Revised October 08, 2019 0514-02.pdf SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 Test Method or Standard: Test Description: 0514-02c.pdf

Certificate of Approval Certificate n°: FR079697-1 Contract n°: 15701960 Revision date: 22 February 2023 Laurent CROGUENNEC - President Local office: Bureau Veritas Certification France Le Triangle de l'Arche - 9 Cours du Triangle - 92937 Paris La Défense Further clarifications regarding the scope of this certificate the applicability of the management system requirements may be obtained by consulting the organization. To check this certificate validity, please call + 33(0) 1 41 97 00 60. AVIENT BELGIUM 2, RUE MELVILLE WILSON 5330 ASSESSE- BELGIUM Bureau Veritas Certification France certify that the Management System of the above organization has been audited and found to be in accordance with the requirements of the management system standard detailed below: Standard ISO 14001 : 2015 Scope of certification DESIGN AND MANUFACTURE OF COLOUR AND ADDITIVE CONCENTRATES, THERMOPLASTIC RESINS AND SPECIALITY COMPOUNDS.