À Paris, le 17 juillet 2020 1 Disponible sur le site du COTREP : https://www.cotrep.fr/content/uploads/sites/3/2019/02/tri-p1-emballages-sombres-v01-2019.pdf

Avient Technical Service will order and deliver a 1L or 3L PlanetPak trial kit to your site. 3.

Uranusweg 3 8938 AJ Leeuwarden The Netherlands +31(0) 58 216 75 99 info@fiber-line.com NOTICE: The information and data contained herein do not constitute sales specifications.

GUIDELINES FOR USING CESA CLEAN ADDITIVES • Cesa Clean works best when molded maintaining normal (injection) pressure/shear • For best results, Avient recommends a “Running Color Change” which eliminates breaks in the molding cycle • Since the Cesa Clean concentrate will expand, it is recommended to reduce the shot size by 20% • It is designed for use at a let-down ratio (LDR) of 3.0% or (33:1); however, use rate can vary depending on the severity of the contamination but typically is 2.0–4.0% (a use rate higher than 6.0% may not have any positive affect on the cleaning performance) • Using Cesa Clean as a routine part of your color change rotation will allow faster changes and consume a minimal amount of raw material - Note: If the manifold is not cleaned routinely, this process may be more time consuming and additional material will be required • It is best to process at your normal polymer processing temperatures - For best performance, stock temperature should be at least 400°F - If 400°F is achieved during the purging process, no additional activation will occur during the reprocessing of regrind - All parts produced during the “Running Purge Cycle” should be captured as regrind, resulting in a scrap-free color change - If using sequential gates, open and close all gates at the same time while purging the tool - If contamination appears to be coming from one gate, open and close first, and for an extended period of time, to force more material through this location - When cleaning in this manner, pay close attention to shot size - Parts containing the previous or new color plus any Cesa Clean can be used as regrind INTRODUCING CESA CLEAN TO YOUR PROCESS Hand Blend • Hand weigh enough of the Cesa Clean and natural resin mix to equate to 3–5 times the barrel capacity • Use rate should be 3.0% or 33:1 for routine cleaning • For difficult-to-clean tooling, or tooling which is not routinely cleaned, start at 4.0% or 25:1 • Note: Do not attempt to vacuum load more than 15 feet from source as stratification/separation may occur Volumetric Feeder • Calibrate feeder to dispense 3.0% or 33:1 for routine cleaning • For difficult-to-clean tooling, or tooling which is not routinely cleaned, start at 4.0% or 25:1 • This style of feeder is highly recommended for at-the-throat metering of Cesa Clean Blending Units Most blenders have an extra bin for an additive • Fill the additive bin with Cesa Clean • Set blender to introduce the Cesa Clean at 2.0 to 4.0% • Note: Do not air convey any further than 15 feet as Cesa Clean has a high density and may separate from the mix.

Conduct an annual evaluation of the Committee’s performance. 3 Recommendations as to the Board.

Three common ways this can be done are 1) in a way that creates a woven structure, 2) by placing the fiber fabric into a mold that is injected with resin, or 3) by pultrusion, where the fibers are pulled through resin and then shaped and cured in a heated die.

3

Orangeville Plasticizer (Update 1) Report Preview National Pollutant Release Inventory (NPRI) and Partners Home Submission Management Help My Profile:Brian Greer Logout Ec.gc.ca Report Preview Report Details Company and Facility Details Contacts Details Report Year 2016 Report Type: NPRI,ON MOE TRA Report Status: Update 1 ­ Submitted Modified Date/Time: 30/04/2018 3:36 PM Report Update Comments: As per requests from Catherine Siew Company Name: Polyone Canada Inc. lang=En&n=FD9B0E51-1 https://ec.ss.ec.gc.ca/auth/en/Services about:/ about:/ about:/ General Information Substance List CAS RN Substance Name Releases Releases (Speciated VOCs) Disposals Recycling Unit 103­23­1 Bis(2­ethylhexyl) adipate 0.0000 N/A N/A N/A tonnes 117­81­7 Bis(2­ethylhexyl) phthalate 0.0001 N/A N/A N/A tonnes 85­44­9 Phthalic anhydride N/A N/A N/A N/A tonnes Extension 73642 Fax: 4164994687 Email: darryl.chartrand@ch2m.com Contact Type Highest Ranking Employee Name: Robert Greenop Position: Plant Manager Telephone: 5199385865 Email: robert.greenop@polyone.com Mailing Address: Address Line 1: City, Province/Territory, Postal Code: None Country: None Contact Type Person who prepared the report Name: Najat Kamal Position: EHSQ specialist Telephone: 5148089920 Email: najat.kamal@polyone.com Mailing Address: Delivery Mode: GeneralDelivery Address Line 1: City, Province/Territory, Postal Code: None Country: None Number of employees: 16 Activities for Which the 20,000­Hour Employee Threshold Does Not Apply: None of the above Activities Relevant to Reporting Dioxins, Furans and Hexacholorobenzene: None of the above Activities Relevant to Reporting of Polycyclic Aromatic Hydrocarbons (PAHs): Wood preservation using creosote: No Is this the first time the facility is reporting to the NPRI (under current or past ownership): No Is the facility controlled by another Canadian company or companies: No Did the facility report under other environmental regulations or permits: No Is the facility required to report one or more NPRI Part 4 substances (Criteria Air Contaminants): No Operating Schedule ­ Days of the Week: Mon, Tue, Wed, Thu, Fri Usual Number of Operating Hours per day: 24 Usual Daily Start Time (24h) (hh:mm): 07:00 CAS RN Substance Name Releases Releases (Speciated VOCs) Disposals Recycling Unit Applicable Programs CAS RN Substance Name NPRI ON MOE TRA ON MOE Reg 127/01 First report for this substance to the ON MOE TRA 103­23­1 Bis(2­ethylhexyl) adipate Yes Yes Yes 117­81­7 Bis(2­ethylhexyl) phthalate Yes Yes No 85­44­9 Phthalic anhydride Yes Yes No General Information about the Substance ­ Releases and Transfers of the Substance CAS RN Substance Name Was the substance released on­site The substance will be reported as the sum of releases to all media (total of 1 tonne or less) 1 tonne or more of a Part 5 Substance (Speciated VOC) was released to air 103­23­1 Bis(2­ ethylhexyl) adipate Yes Yes No 117­81­7 Bis(2­ ethylhexyl) phthalate Yes Yes No 85­44­9 Phthalic anhydride No No No General Information about the Substance ­ Disposals and Off­site Transfers for Recycling CAS RN Substance Name Was the substance disposed of (on­site or off­ site), or transferred for treatment prior to final disposal Is the facility required to report on disposals of tailings and waste rock for the selected reporting period Was the substance transferred off­site for recycling 103­23­1 Bis(2­ ethylhexyl) adipate No No No 117­81­7 Bis(2­ ethylhexyl) phthalate No No No 85­44­9 Phthalic anhydride No No No General Information about the Substance ­ Nature of Activities CAS RN Substance Name Manufacture the Substance Process the Substance Otherwise Use of the Substance 103­23­1 Bis(2­ethylhexyl) adipate For sale/distribution As a formulation component As a by­product 117­81­7 Bis(2­ethylhexyl) phthalate For sale/distribution As a formulation component As a by­product 85­44­9 Phthalic anhydride As a by­product As a reactant As a by­product TRA Quantifications CAS RN Substance Name Use, Creation, Contained in Product Quantity Use ranges for public reporting 103­23­1 Bis(2­ethylhexyl) adipate Use 0.000 tonnes Yes 103­23­1 Bis(2­ethylhexyl) adipate Creation 27.159 tonnes Yes 103­23­1 Bis(2­ethylhexyl) adipate Contained in Product 27.159 tonnes Yes 117­81­7 Bis(2­ethylhexyl) phthalate Use 0.000 tonnes Yes 117­81­7 Bis(2­ethylhexyl) phthalate Creation 0.104 tonnes Yes 117­81­7 Bis(2­ethylhexyl) phthalate Contained in Product 0.104 tonnes Yes 85­44­9 Phthalic anhydride Use 4228.7 tonnes Yes 85­44­9 Phthalic anhydride Creation 0.000 tonnes Yes 85­44­9 Phthalic anhydride Contained in Product 4228.7 tonnes Yes TRA Quantifications ­ Others CAS RN Substance Name Change in Method of Quantification Reasons for Change Description of how the change impact tracking and quantification of the substance Description of how an incident(s) affected quantifications Significant Process Change 103­23­1 Bis(2­ ethylhexyl) adipate No 117­81­7 Bis(2­ ethylhexyl) phthalate No 85­44­9 Phthalic anhydride No CAS RN Substance Name Change in Method of Quantification Reasons for Change Description of how the change impact tracking and quantification of the substance Description of how an incident(s) affected quantifications Significant Process Change Total Quantity Released (All Media) CAS RN Substance Name Category Basis of Estimate Detail Code Quantity 103­23­1 Bis(2­ethylhexyl) adipate Total Quantity Released O ­ Engineering Estimates 0.0000 tonnes 117­81­7 Bis(2­ethylhexyl) phthalate Total Quantity Released O ­ Engineering Estimates 0.0001 tonnes On­site Releases ­ Quarterly Breakdown of Annual Releases CAS RN Substance Name Quarter 1 Quarter 2 Quarter 3 Quarter 4 117­81­7 Bis(2­ethylhexyl) phthalate 25 25 25 25 On­site Releases ­ Reasons for Changes in Quantities Released from Previous Year CAS RN Substance Name Reasons for Changes in Quantities from Previous Year Comments 103­23­1 Bis(2­ethylhexyl) adipate No significant change (i.e. < 10%) or no change 117­81­7 Bis(2­ethylhexyl) phthalate No significant change (i.e. < 10%) or no change 85­44­9 Phthalic anhydride No significant change (i.e. < 10%) or no change Disposals ­ Reasons and Comments CAS RN Substance Name Reasons Why Substance Was Disposed Reasons for Changes in Quantities from Previous Year Comments 103­23­1 Bis(2­ethylhexyl) adipate No significant change (i.e. < 10%) or no change 117­81­7 Bis(2­ethylhexyl) phthalate No significant change (i.e. < 10%) or no change 85­44­9 Phthalic anhydride No significant change (i.e. < 10%) or no change Recycling ­ Reasons and Comments CAS RN Substance Name Reasons Why Substance Was Recycled Reasons for Changes in Quantities Recycled from Previous Year Comments 103­23­1 Bis(2­ethylhexyl) adipate No significant change (i.e. < 10%) or no change 117­81­7 Bis(2­ethylhexyl) phthalate No significant change (i.e. < 10%) or no change 85­44­9 Phthalic anhydride No significant change (i.e. < 10%) or no change Comparison Report ­ Enters, Creation, Contained in Product CAS RN Substance Name Is Breakdown Category Quantity Last Reported Quantity Reporting Period of Last Reported Quantity Change % Change 117­81­7 Bis(2­ethylhexyl) phthalate No Enters the facility (Use) 0.000 tonnes 0.000 tonnes 2015 0.000 117­81­7 Bis(2­ethylhexyl) phthalate No Creation 0.104 tonnes 52.387 tonnes 2015 ­52.283 ­99.80 117­81­7 Bis(2­ethylhexyl) phthalate No Contained in Product 0.104 tonnes 52.387 tonnes 2015 ­52.283 ­99.80 85­44­9 Phthalic anhydride No Enters the facility (Use) 4228.7 tonnes 417.417 tonnes 2015 3811.283 913.06 85­44­9 Phthalic anhydride No Creation 0.000 tonnes 0.000 tonnes 2015 0.000 85­44­9 Phthalic anhydride No Contained in Product 4228.7 tonnes 417.417 tonnes 2015 3811.283 913.06 Comparison Report ­ Enters, Creation, Contained in Product : Reason(s) for Change CAS RN Substance Name Reason(s) for Change Other Reason 117­81­7 Bis(2­ethylhexyl) phthalate Decrease in production levels Implementation of actions outside of toxics reduction plan 85­44­9 Phthalic anhydride Increase in production levels Comparison Report ­ On­site Releases CAS RN Substance Name Is Breakdown Category Quantity Last Reported Quantity Reporting Period of Last Reported Quantity Change % Change 117­81­7 Bis(2­ethylhexyl) phthalate No Total Releases to Air 0 tonnes CAS RN Substance Name Is Breakdown Category Quantity Last Reported Quantity Reporting Period of Last Reported Quantity Change % Change 117­81­7 Bis(2­ethylhexyl) phthalate No Total Releases to Water 0 tonnes 117­81­7 Bis(2­ethylhexyl) phthalate No Total Releases to Land 0 tonnes 117­81­7 Bis(2­ethylhexyl) phthalate No Total Releases to All Media 0.0001 tonnes 0.0000 tonnes 2015 0.0001 100 Comparison Report ­ On­site Releases ­ Reason(s) for Change CAS RN Substance Name Reason(s) for Change Other Reason 117­81­7 Bis(2­ethylhexyl) phthalate No reasons ­ quantities approximately the same Pollution Prevention Progress on TRA Plan ­ Objectives CAS RN Substance Name Objectives 117­81­7 Bis(2­ ethylhexyl) phthalate Polyone will strive to reduce the use of this substance at the facility.

Approved Plant/Local : Reference Document Document #: DOC-10815 Revision: 4 Document Owners: Dean Clark Effective Date: Jul 15, 2021 Title: NEU Quality Commitment Page 3 of 4 Only the electronic version of this document in ETQ is the controlled version of the document.

Uranusweg 3 8938 AJ Leeuwarden The Netherlands +31(0) 58 216 75 99 info@fiber-line.com ABOUT FIBER-LINE® NOTICE: The information and data contained herein do not constitute sales specifications.