ONFLEX™ HT ONFLEX™ AF 7210 ONFLEX™ S KA ONFLEX™ S KG Applications Fasteners/ Clips Fasteners/ Clips Fasteners/ Clips Fasteners/ Clips Defining Characteristic High temperature sealing performance Ambient temperature sealing performance High temperature sealing performance Ambient temperature sealing performance Density 1.00 g/ml 0.99 g/ml 1.10 g/ml 1.13 g/ml Physical Properties Tensile Strength 6.0–10.0 MPa 5.0–11.5 MPa 3.0–7.5 MPa 2.6–4.9 MPa Tear Resistance 25.0–37.0 kN/m 21.0–43.0 kN/m 17.0–46.0 kN/m 16.0–29.0 kN/m Compression Set 73°F (23°C) 72hrs 12–27% 16–32% 13–23% 31–35% 158°F (70°C) 22hrs 28–44% 32–43% 29–38% 62–66% 212°F (100°C) 22hrs 45–53% 56–60% 54–57% 80–85% Hardness 40–80 Shore A 40–80 Shore A 40–80 Shore A 40–80 Shore A Overmolding Substrate Polypropylene/ Polyethylene Polypropylene Polyamide Polyamide Processing Injection Molding/ Extrusion Injection Molding/ Extrusion Injection Molding/ Extrusion Injection Molding/ Extrusion HOW GLS TPEs MAKE THE DIFFERENCE IN AUTOMOTIVE FASTENERS AND CLIPS • Low compression set – coupled with good stress relaxation, our automotive TPEs are designed to maintain a good seal over time and reduce noise generated by vibration • High temperature performance – Avient automotive TPEs provide good sealing performance in temperatures up to 100°C/212°F • Bonding performance - strong chemical bond to polypropylene, polyethylene, and polyamide • Process flexibility - grades can be both injection molded and extruded • Easy to color - can be colored at the machine • Reduced production steps - some grades do not require pre-drying • Low VOC/FOG - OnFlex HT™ has been externally tested to VDA 278 and is proven to help satisfy vehicle interior air quality (VIAQ) regulatory requirements • Single source supply – we can streamline your supply chain with the ability to provide polymer colorants, engineered thermoplastics, and thermoplastic elastomers from a single source • Global support - we provide production, technical, and commercial support in locations convenient to your operations, including North America, Europe, and Asia To learn more about GLS TPEs for automotive applications, visit www.avient.com or call +1.844.4AVIENT (1.844.428.4368). www.avient.com Copyright © 2020, Avient Corporation.

ONFLEX™ LO 7120-45 ONFLEX™ HT 40A-3S2131 BERGAFLEX™ BFIG 45A-300 Applications HVAC Seals HVAC Seals HVAC Seals Interior - direct airflow Interior & exterior Interior - direct airflow HVAC feature Low VOC/FOG & odor Low VOC/FOG & odor Low odor Cold air Hot air Cold air VDA 270 ≤3.0 ≤3.0 ≤3.0 VOC/FOG VDA 278 (VOC) 97µg/g 100µg/g 196µg/g VDA 278 (FOG) 1131µg/g 1116µg/g 1707µg/g DIN 75201 (FOG) 0.3mg 1.7mg 1.1mg 73°F (23°C) 72 hrs 15% 12% 15% 158°F (70°C) 22 hrs 45% 28% 50% 212°F (100°C) 22 hrs 70% 45% 90% Density 1.15 g/ml 1.00 g/ml 1.17 g/ml Processing Injection Molding Injection Molding/ Extrusion Injection Molding Bonds to Polypropylene Polypropylene/ Polyethylene Polypropylene Hardness range 35–65 Shore A 40–70 Shore A 35–65 Shore A HOW GLS TPEs MAKE THE DIFFERENCE IN AUTOMOTIVE HVAC APPLICATIONS • Low VOC/FOG – externally tested to VDA 278 and shows significant reductions in volatile organic compounds and fogging when compared to current TPE technologies • Industry standards – helps to achieve VOC/ FOG performance standards for improved VIAQ • Reduced manufacturing steps – does not require pre-drying or post heating to reduce VOC in parts produced • Design optimization – color can be added at the machine • Easy to process – can be extruded, injection molded and extrusion blow molded • Recyclable – Our automotive TPEs are compatible with most municipal recycle streams • Global support – Avient automotive TPEs can be manufactured in locations that are convenient to your operations, including North America, Europe or China To learn more about GLS TPEs for automotive applications, contact Avient at +1.844.4AVIENT (+1.844.428.4368).

PRODUCT BULLETIN PROPERTY TEST METHOD TYPICAL VALUE (ENGLISH) TYPICAL VALUE (SI) Specific Gravity ASTM D-792 11.0 11.0 Tensile Modulus1 ASTM D-638 1.20E+6 psi 8270 MPa Tensile Strength1 (Yield) ASTM D-638 3,950 psi 27.2 MPa Flexural Modulus ASTM D-790 800,000 psi 5520 MPa Flexural Strength ASTM D-790 7,000 psi 48.3 MPa Notched Izod Impact2 ASTM D-256A 2.1 ft•lb/in 110 J/m Deflection Temperature Under Load 66 psi (0.45 MPa), Unannealed, 0.250 in (6.35mm) ASTM D-648 280°F 138°C Deflection Temperature Under Load 264 psi (1.8 MPa), Unannealed, 0.250 in (6.35mm) ASTM D-648 190°F 87.8°C TECHNICAL PROPERTIES 1 Type I, 0.20 in/min (5.1 mm/min) 2 73°F (23°C), 0.125 in (3.18 mm), Injection molded www.avient.com Copyright © 2020, Avient Corporation.

FIBER-LINE™ High Performance Synthetic Fibers PRODUCT SELECTION GUIDE FIBER-LINE™ HIGH PERFORMANCE SYNTHETIC FIBERS Kevlar® Para-Aramid Nomex® Meta-Aramid Vectran® LCP Zylon® PBO Carbon Fiber UHMWPE PET Polyester Fiberglass Novoloid Technora® Filament Yarn TECHNICAL PROPERTIES Standard Modulus High Modulus Standard Modulus Standard Modulus High Modulus Standard Modulus High Modulus Standard Modulus Standard Modulus High Modulus High Tenacity Low Shrink E-Glass S-Glass Standard Modulus Standard Modulus Breaking Tenacity (g/d) 23.0 23.6 5.0 23.0 30.0 42.0 42.0 23.0 28.0 38 9.3 8.4 6.0 - 7.3 6.7 - 9.4 1.5 28.0 Specific Gravity (Ratio) 1.44 1.44 1.38 1.40 1.40 1.54 1.56 1.80 0.97 0.97 1.38 1.38 2.58 2.48 1.27 1.39 Elongation at Break (%) 3.5 2.5 30.0 3.8 2.8 3.5 2.5 1.5 3.5 3.1 14.6 19.5 3.5 5.5 30.0 - 40.0 4.6 Tensile Modulus (g/d) 555 885 125 600 830 1200 1800 1480 850 1250 120 70 200–275 140–170 2.5–5.0 590 Equilibrium Moisture Regain at 55% RH (%) 5.0 5.0 4.5

When exposed to a light source for 10 minutes, this new generation of heat-preservation additives can provide a temperature increase from 6°C to 12°C for PET and PA fibers based on different let-down-ratio and textile structure. KEY CHARACTERISTICS • Offers reheating property for synthetic fibers with specialty formulations • Provides a temperature increase of up to 12°C when exposed to a light source for 10 minutes • Good spinnability • Lower impact on the color APPLICATIONS Cesa Fiber Additives are intended for use in: • Clothing: hoodie, sweater, jacket, ski clothing, thermal underwear, etc. • Home textile: bedding, blankets, etc. • Technical fabrics for thermal insulation PRODUCT BULLETIN Copyright © 2023, Avient Corporation.

Handelsregister B des Amtsgerichts Mannheim Nummer der Firma: Seite 1 von 2 HRB 731450 Nummer der Eintragung a) Firma b) Sitz, Niederlassung, inländische Geschäftsanschrift, empfangsberechtigte Person, Zweigniederlassungen c) Gegenstand des Unternehmens Grund- oder Stammkapital a) Allgemeine Vertretungsregelung b) Vorstand, Leitungsorgan, geschäftsführende Direktoren, persönlich haftende Gesellschafter, Geschäftsführer, Vertretungsberechtigte und besondere Vertretungsbefugnis Prokura a) Rechtsform, Beginn, Satzung oder Gesellschaftsvertrag b) Sonstige Rechtsverhältnisse a) Tag der Eintragung b) Bemerkungen 1 2 3 4 5 6 7 1 a) PolyOne S.à r.l., Germany Branch b) Gaggenau Geschäftsanschrift: Adolf-Dambach-Straße 2, 76571 Gaggenau Zweigniederlassung der "PolyOne S.à r.l." mit Sitz in Pommerloch / Luxemburg (Registre de commerce et des sociétés B226205) c) Den Vertrieb und den Großhandel von Fertigerzeugnissen, die unter anderem aus ein- und mehrschichtigen thermoplastischen Platten, Polymermischungen und Farbkonzentraten sowie klaren thermogeformten Kunststoffbehältern bestehen, wobei die Tätigkeiten für die das Gesetz besondere Qualifikationen oder Erlaubnisse vorschreibt, die von der Zweigniederlassung nicht erfüllt oder gehalten werden, ausdrücklich ausgeschlossen sind. 12.000,00 EUR a) Jeder Geschäftsführer vertritt einzeln. b) Geschäftsführer: Kronimus, Holger Hans, Hilgert, *01.01.1968 Geschäftsführer: Palm, Christoph, Weiswampach / Luxemburg, *16.05.1963 Geschäftsführer: Machin, Geneviéve Elizabeth, Luxemburg / Luxemburg, *31.03.1972 Ständiger Vertreter: Kronimus, Holger Hans, Hilgert, *01.01.1968 einzelvertretungsberechtigt mit der Befugnis, im Namen der Gesellschaft mit sich im eigenen Namen oder als Vertreter eines Dritten Rechtsgeschäfte abzuschließen. a) Gesellschaft mit beschränkter Haftung nach luxemburgischem Recht (société à responsibilité limitée) Gesellschaftsvertrag vom 04.07.2018. a) 10.09.2018 Kretzler 2 b) Bestellt als Geschäftsführer: Fielding, Gary J., Chesire / Vereinigtes Königreich, *20.09.1963 Bestellt als Geschäftsführer: Potoczny, Zaneta Gabriela, Mersch / Luxemburg, *17.10.1974 Ausgeschieden als Geschäftsführer: Machin, Geneviéve Elizabeth, Luxemburg / Luxemburg, *31.03.1972 a) 17.03.2020 Knauf Abruf vom 27.12.2021 17:13 Handelsregister B des Amtsgerichts Mannheim Nummer der Firma: Seite 2 von 2 HRB 731450 Nummer der Eintragung a) Firma b) Sitz, Niederlassung, inländische Geschäftsanschrift, empfangsberechtigte Person, Zweigniederlassungen c) Gegenstand des Unternehmens Grund- oder Stammkapital a) Allgemeine Vertretungsregelung b) Vorstand, Leitungsorgan, geschäftsführende Direktoren, persönlich haftende Gesellschafter, Geschäftsführer, Vertretungsberechtigte und besondere Vertretungsbefugnis Prokura a) Rechtsform, Beginn, Satzung oder Gesellschaftsvertrag b) Sonstige Rechtsverhältnisse a) Tag der Eintragung b) Bemerkungen 1 2 3 4 5 6 7 3 a) Firma geändert; nun: Avient S.à r.l., Germany Branch b) Daten der Hauptniederlassung geändert; nun: Zweigniederlassung der "Avient S.à r.l." mit Sitz in Pommerloch / Luxemburg (Registre de commerce et des sociétés B226205) b) Ausgeschieden als Geschäftsführer: Fielding, Gary J., Chesire / Vereinigtes Königreich, *20.09.1963 Bestellt als Geschäftsführer: Merklein, Norbert, Kronberg im Taunus, *03.05.1964 a) Der geänderte Gesellschaftsvertrag der Hauptniederlassung wurde zum Handelsregister eingereicht. a) 23.12.2021 Georg Abruf vom 27.12.2021 17:13

Coffee Capsules case study DESIGN FOR COMPOSTING C O F F E E C A P S U L E S • Compliance with European Standard EN 13432 • Biodegradable and compostable solutions approved by certified body (TÜV Austria) • Color customization for various kind of biopolymers • Formulation expertise and regulatory assistance OnColor™ Bio-Colorants KEY REQUIREMENTS WHY AVIENT?

OFF-ROAD VEHICLE MANUFACTURER C A R G O R A C K • Design freedom • Improve process efficiency to reduce cost • High strength-to-weight ratio • Aesthetic appeal • Weather and chemical resistance • Replaced metal with a injection-moldable thermoplastic plus TPE overmold to meet performance demands and maintain premium brand quality • Provided technical support to help expand the design and function of the cargo rack • Reduced manufacturing costs by eliminating the painting step from the process Versalloy™ TPE and thermoplastic substrate KEY REQUIREMENTS WHY AVIENT?

CABLE MANUFACTURER A E R I A L D R O P C A B L E J A C K E T • Pass clamp test requested by end user • Strong UV resistance & mechanical performance • Excellent processing • Good fire performance to pass CPR class Cca / Dca • Low shrinkage (< 1%) • Exceeded material fire performance requirements and met all other performance criteria • Simplified supply chain with local manufacture in Europe • Enabled customer to run material at optimum processing conditions by providing support with machine set up.

CABLE MANUFACTURER A E R I A L D R O P C A B L E J A C K E T • Pass clamp test requested by end customer • Strong UV resistance & mechanical performance • Excellent processing • Good fire performance to pass CPR class Cca / Dca • Low shrinkage (< 1%) • Exceeded material fire performance requirements and met all other performance criteria • Simplified supply chain with local manufacture in Europe • Enabled customer to run material at optimum processing conditions by providing support with machine set up ECCOH™ 5978 UV Formulation KEY REQUIREMENTS WHY AVIENT?