The oxygen scavenger formulations are added to the PET melt using conventional pellet handling systems.

This pure metal replacement solution can be customized to meet specific density requirements, formulated to meet a broad modulus range, and engineered to meet complex design specifications.

Avient’s Versaflex™ CE non-blooming TPEs are specifically formulated to overcome the challenge of surface blooms when overmolding consumer electronics.

AUTOMOTIVE SOLUTIONS EMI/RFI SHIELDING & STATIC DISSIPATIVE FORMULATIONS FOR ADVANCED DRIVER ASSISTANCE SYSTEMS Advanced Driver Assistance Systems (ADAS), comprised of sensitive electronics such as sensors, cameras and electronic control units (ECUs), require high-performance materials to protect them from static buildup, EMI/RFI interference and other issues.

MATERIAL SOLUTION DESCRIPTION KEY CHARACTERISTICS POTENTIAL APPLICATIONS Hammerhead™ FR Flame Retardant Composite Panels Industry-first flame retardant thermoplastic composite panels that meet ASTM E84 Class A standards for flame spread and smoke developed and configurations available to meet NFPA 286 corner room burn testing • Excellent flame performance • Moisture, UV, corrosion, impact, and rot resistant • Lightweight structural integrity • Reduce labor cost and time • Interior Wall, Floor & Ceiling Panel Systems • Garage Doors • Interior & Entry Doors • Exterior Sheathing • Siding & Cladding • Kitchen Cabinetry Hammerhead™ and Polystrand™ Composite Panels Thermoplastic composite panels constructed with Polystrand™ continuous fiber laminates thermally bonded to thermoplastic foam or honeycomb cores • Moisture, UV, corrosion, impact, and rot resistant • Lightweight structural integrity • Reduce labor cost and time • Garage Doors • Interior Entry Doors • Interior Wall, Floor & Ceiling Panel Systems • Exterior Sheathing • Siding & Cladding • Kitchen Cabinetry Polystrand™ Continuous Fiber Tapes & Laminates High strength unidirectional (UD) glass fibers combined with thermoplastic resins available in unidirectional tapes or multi-ply laminates • High strength and stiffness • Enables impact resistance • Formulations available to meet ASTM E84 Class A and Class B flame/smoke rating • Composite Deckng • Interior & Entry Doors • Roofing Systems GlasArmor™ Ballistic Resistant Panels Ballistic protection constructed from layers of 0°/90° woven E-glass fiber reinforcements with a proprietary thermoset resin system • UL 752 Level 1–3 compliant • Less than 25% the weight of comparable steel panel • 1-hr fire rating per ASTM E119* • Safe/Panic Rooms • Garage Doors • Interior & Entry Doors ThermoBallistic™ Thermoplastic Panels Industry-first thermoplastic ballistic resistant panels thermally formed with layers of 0°/90° UD E-glass fiber reinforcements and polyolefin-based resin systems • UL 752 Level 3 compliant • Extremely lightweight • Moisture, UV, and corrosion resistant • Safe/Panic Rooms • Garage Doors • Interior & Entry Doors * UL Level 3 panel was fire tested as part of a wall system with steel studs and drywall facesheet

We operate in two reportable segments: (1) Color, Additives and Inks; (2) Specialty Engineered Materials

Composition Kevlar® is an aromatic polyamide that is characterized by long rigid crystalline polymer chains.

GUIDELINES FOR USING CESA CLEAN ADDITIVES • Cesa Clean works best when molded maintaining normal (injection) pressure/shear • For best results, Avient recommends a “Running Color Change” which eliminates breaks in the molding cycle • Since the Cesa Clean concentrate will expand, it is recommended to reduce the shot size by 20% • It is designed for use at a let-down ratio (LDR) of 3.0% or (33:1); however, use rate can vary depending on the severity of the contamination but typically is 2.0–4.0% (a use rate higher than 6.0% may not have any positive affect on the cleaning performance) • Using Cesa Clean as a routine part of your color change rotation will allow faster changes and consume a minimal amount of raw material - Note: If the manifold is not cleaned routinely, this process may be more time consuming and additional material will be required • It is best to process at your normal polymer processing temperatures - For best performance, stock temperature should be at least 400°F - If 400°F is achieved during the purging process, no additional activation will occur during the reprocessing of regrind - All parts produced during the “Running Purge Cycle” should be captured as regrind, resulting in a scrap-free color change - If using sequential gates, open and close all gates at the same time while purging the tool - If contamination appears to be coming from one gate, open and close first, and for an extended period of time, to force more material through this location - When cleaning in this manner, pay close attention to shot size - Parts containing the previous or new color plus any Cesa Clean can be used as regrind INTRODUCING CESA CLEAN TO YOUR PROCESS Hand Blend • Hand weigh enough of the Cesa Clean and natural resin mix to equate to 3–5 times the barrel capacity • Use rate should be 3.0% or 33:1 for routine cleaning • For difficult-to-clean tooling, or tooling which is not routinely cleaned, start at 4.0% or 25:1 • Note: Do not attempt to vacuum load more than 15 feet from source as stratification/separation may occur Volumetric Feeder • Calibrate feeder to dispense 3.0% or 33:1 for routine cleaning • For difficult-to-clean tooling, or tooling which is not routinely cleaned, start at 4.0% or 25:1 • This style of feeder is highly recommended for at-the-throat metering of Cesa Clean Blending Units Most blenders have an extra bin for an additive • Fill the additive bin with Cesa Clean • Set blender to introduce the Cesa Clean at 2.0 to 4.0% • Note: Do not air convey any further than 15 feet as Cesa Clean has a high density and may separate from the mix.

ONFLEX™ HT ONFLEX™ AF 7210 ONFLEX™ S KA ONFLEX™ S KG Applications Fasteners/ Clips Fasteners/ Clips Fasteners/ Clips Fasteners/ Clips Defining Characteristic High temperature sealing performance Ambient temperature sealing performance High temperature sealing performance Ambient temperature sealing performance Density 1.00 g/ml 0.99 g/ml 1.10 g/ml 1.13 g/ml Physical Properties Tensile Strength 6.0–10.0 MPa 5.0–11.5 MPa 3.0–7.5 MPa 2.6–4.9 MPa Tear Resistance 25.0–37.0 kN/m 21.0–43.0 kN/m 17.0–46.0 kN/m 16.0–29.0 kN/m Compression Set 73°F (23°C) 72hrs 12–27% 16–32% 13–23% 31–35% 158°F (70°C) 22hrs 28–44% 32–43% 29–38% 62–66% 212°F (100°C) 22hrs 45–53% 56–60% 54–57% 80–85% Hardness 40–80 Shore A 40–80 Shore A 40–80 Shore A 40–80 Shore A Overmolding Substrate Polypropylene/ Polyethylene Polypropylene Polyamide Polyamide Processing Injection Molding/ Extrusion Injection Molding/ Extrusion Injection Molding/ Extrusion Injection Molding/ Extrusion HOW GLS TPEs MAKE THE DIFFERENCE IN AUTOMOTIVE FASTENERS AND CLIPS • Low compression set – coupled with good stress relaxation, our automotive TPEs are designed to maintain a good seal over time and reduce noise generated by vibration • High temperature performance – Avient automotive TPEs provide good sealing performance in temperatures up to 100°C/212°F • Bonding performance - strong chemical bond to polypropylene, polyethylene, and polyamide • Process flexibility - grades can be both injection molded and extruded • Easy to color - can be colored at the machine • Reduced production steps - some grades do not require pre-drying • Low VOC/FOG - OnFlex HT™ has been externally tested to VDA 278 and is proven to help satisfy vehicle interior air quality (VIAQ) regulatory requirements • Single source supply – we can streamline your supply chain with the ability to provide polymer colorants, engineered thermoplastics, and thermoplastic elastomers from a single source • Global support - we provide production, technical, and commercial support in locations convenient to your operations, including North America, Europe, and Asia To learn more about GLS TPEs for automotive applications, visit www.avient.com or call +1.844.4AVIENT (1.844.428.4368). www.avient.com Copyright © 2020, Avient Corporation.

MANAGEMENT_TYPE1: This is to certify that the Quality Management System of: COMPANY_NAME: NEU Specialty Engineered Materials FACILITY1_LINE1: 15 Corporate Drive FACILITY1_LINE2: North Haven, CT 06473 FACILITY1_LINE3: U.S.A.