https://www.avient.com/resources/safety-data-sheets?page=7159
X-AR-444872A-1
XGT 45433-0002A-01-1
Shipment Notification - under "Material Header" MSDS - labeled as the "Product Number" (in Section 1)
https://www.avient.com/resources/safety-data-sheets?page=5745
MC-73295PP WHITE W/ 1 YR UV
MC-81124PE CL.GRY.1
Shipment Notification - under "Material Header" MSDS - labeled as the "Product Number" (in Section 1)
https://www.avient.com/resources/safety-data-sheets?page=7149
X 45147-0002A-01-1
X 45147-0003C-01-1
Shipment Notification - under "Material Header" MSDS - labeled as the "Product Number" (in Section 1)
https://www.avient.com/resources/safety-data-sheets?page=3628
X HC-2937-001-1 Natural
GREEN (FDA) 484-1071-1
YELLOW 486-30328-1
https://www.avient.com/knowledge-base/article/overmolding-processing?rtype[]=1164
General-purpose screw with compression ratio of 2:1 to 3:1 can be used
Suggested nozzle diameters are 1/16" (0.0625" or 1.59 mm) to 3/16" (0.1875" or 4.76mm)
To achieve the benefits of shear thinning the injection speed should be adjusted to fill the mold in 1 - 3 seconds.
https://www.avient.com/knowledge-base/article/overmolding-processing
General-purpose screw with compression ratio of 2:1 to 3:1 can be used
Suggested nozzle diameters are 1/16" (0.0625" or 1.59 mm) to 3/16" (0.1875" or 4.76mm)
To achieve the benefits of shear thinning the injection speed should be adjusted to fill the mold in 1 - 3 seconds.
https://www.avient.com/products/advanced-composites/composite-ballistic-protection/glasarmor-ballistic-resistant-panels
Get Help Now
+1-866-737-2066
Level 1
GlasArmor Level 1
https://www.avient.com/news/polyone-announces-further-realignment-north-american-assets-acquired-spartech
DeLuca
Vice President, Investor Relations
PolyOne Corporation
+1 440-930-1226
isaac.deluca@avient.com
Rose Director, Corporate Communications
PolyOne Corporation
+1 440-930-3162
kyle.rose@avient.com
https://www.avient.com/products/long-fiber-technology/long-vs-short-fiber
With long fiber reinforced solutions, the individual reinforcing fibers within each pellet are aligned parallel to each other and are exactly as long (usually 1/2 inch or 12 mm) as the pellet due to the unidirectional orientation of the fiber prior to pellet chopping.
Fibers typically 0.04 in/1 mm long
https://www.avient.com/investor-center/news/polyone-achieves-responsible-care-certification-american-chemistry-council
Swanson, Director, Investor Relations, PolyOne Corporation, +1 440-930-1018, eric.swanson@avient.com; Media Contact: Kyle G.
Rose, Vice President, Corporate Communications, PolyOne Corporation, +1 440-930-3162, kyle.rose@avient.com