O Vendedor não faz quaisquer outras garantias estendidas para além da descrição do Produto, sejam elas utilizadas individualmente ou em combinação com qualquer outra substância ou em qualquer processo. 3. Buyer will examine Product promptly after receipt for 3. O Comprador fará todos os pagamentos em dinheiro, ou em títulos de crédito no valor nominal neles descrito, e no local indicado na fatura emitida pelo Vendedor; pagamentos em atraso serão acrescidos de multa de 2% (dois por cento) e juros de 1% (um por cento) ao mês (ou por período) sobre o KLA: 245806 - v5 - p. 3/8 (or fraction) on the total value in delay.

se sídlem Pobřežní 620/3, 186 00 Praha, IČO 26689537, zapsanou v obchodním rejstříku vedeném u Městského soudu v Praze pod spisovou značkou č. Czech Republic Branch, se sídlem Pobřežní 620/3, 186 00 Praha, IČO 07410026, zapsanou v obchodním rejstříku vedeném u Městského soudu v Praze pod spisovou značkou č. Ve vztahu ke vzorkům a vývojovému materiálu Prodávající neposkytuje žádnou záruku, výslovnou ani implicitní, pokud jde o jejich prodejnost a vhodnosti pro určitý účel. 3.

This product selection guide provides detailed information to help you select the Maxxam product that’s right for your application. 4 INJECTION MOLDING POLYPROPYLENE Product Code - - - PP5113 B44 F5134T2-4 PP5130 B63 F5134T4-1 Filler Percentage - % - 13 20 30 40 Tensile Strength Yield psi ASTM D638 5000 4800 4600 4500 MPa ISO 527 33 33 32 31 Tensile Elongation Yield % ASTM D638 6 4 3 2 ISO 527 Break % ASTM D638 60 30 15 10 ISO 527 Flexural Modulus 73°F (23°C) psi ASTM D790 300,000 360,000 400,000 460,000 MPa ISO 178 2300 2450 2900 3300 Notched Izod Impact 73°F (23°C) ft-lb/in ASTM D256 0.65 0.60 0.55 0.50 kJ/m2 ISO 180 3.50 3.3 3.00 2.75 Heat Deflection 66 psi °F ASTM D648 230 240 260 275 °C ISO 75 110 116 127 135 264 psi °F ASTM D648 130 140 150 175 °C ISO 75 54 60 66 79 Specific Gravity 73°F (23°C) - ASTM D792 0.99 1.04 1.15 1.25 ISO 1183 Linear Shrinkage Range 1/8 in wall % - 1.2–1.6 1.0–1.4 0.8–1.2 0.6–1.0 3.2 mm wall % - 1.2–1.6 1.0–1.4 0.8–1.2 0.6–1.0 Product Code - - - PP6113 A77-SM PP6120 B16-2 PP6130 B11 PP6135 B40-UV Filler Percentage - % - 13 20 30 35 Tensile Strength Yield psi ASTM D638 4350 3500 2600 3700 MPa ISO 527 30 24 18 26 Tensile Elongation Yield % ASTM D638 5 4 7 6 ISO 527 Break % ASTM D638 35 70 150 70 ISO 527 Flexural Modulus 73°F (23°C) psi ASTM D790 290,000 280,000 280,000 390,000 MPa ISO 178 2000 1950 1750 2700 Notched Izod Impact 73°F (23°C) ft-lb/in ASTM D256 0.7 2.7 4.5 0.65 kJ/m2 ISO 180 4.0 14 24 3.5 Heat Deflection 66 psi °F ASTM D648 239 215 225 250 °C ISO 75 115 102 107 123 264 psi °F ASTM D648 140 125 130 150 °C ISO 75 60 52 54 60 Specific Gravity 73°F (23°C) - ASTM D792 0.99 1.05 1.15 1.18 ISO 1183 Linear Shrinkage Range 1/8 in wall % - 1.1–1.5 .9–1.3 0.7–1.1 0.5–0.9 3.2 mm wall % - 1.1–1.5 .9–1.3 0.7–1.1 0.5–0.9 Maxxam™ Talc-Filled Copolymer Polypropylene • Scratch & mar resistant • UL approved • FDA certifiable • Natural, black or colors • High flow grades • UV stabilized • UL approved • FDA certifiable • Natural, black or colors • High flow grades • UV stabilized • Recycled content Maxxam™ Talc-Filled Homopolymer Polypropylene Offers a moderate level of impact strength and improved stiffness and heat deflection performance. Offers a high level of stiffness and heat resistance as well as excellent impact resistance • Chemically coupled • UL approved • FDA certifiable • Natural, black or colors • High flow grades • Recycled content • Chemically coupled • UL approved • FDA certifiable • Natural, black or colors • High flow grades • UV stabilized INJECTION MOLDING POLYPROPYLENE Product Code - - - PP5410 B1 PP5420 B1 PP5430 B5 PP5440 B1 Reinforcement % - - - 10 20 30 40 Specific Gravity 73°F (23°C) - ASTM D792 0.96 1.05 1.14 1.23 ISO 1183 Tensile Strength Yield psi ASTM D638 8000 10000 11500 13000 MPa ISO 527 55 69 79 90 Tensile Elongation Break % ASTM D638 8 2 2 2 ISO 527 Flexural Modulus 73°F (23°C) psi ASTM D790 525,000 795,000 850,000 1,000,000 MPa ISO 178 3600 5450 5800 7550 Notched Izod Impact 73°F (23°C) ft-lb/in ASTM D256 1.10 1.30 1.50 1.60 kJ/m2 ISO 180 6.00 7.25 8.25 8.50 Heat Deflection 66 psi °F ASTM D648 280 305 310 315 °C ISO 75 138 152 154 157 264 psi °F ASTM D648 250 280 290 300 °C ISO 75 121 138 143 149 Linear Shrinkage Range 1/8 in wall % - 0.4–0.7 0.3–0.6 0.3–0.6 0.2–0.5 3.2 mm wall % - 0.4–0.7 0.3–0.6 0.3–0.6 0.2–0.5 Product Code - - - PP7410 A241 PP7420 B77 PP6430 A206-UV PP6435 B1 Reinforcement % - - - 10 20 30 35 Specific Gravity Yield - ASTM D792 0.98 1.05 1.14 1.17 ISO 1183 Tensile Strength Yield psi ASTM D638 5300 9200 9000 13300 MPa ISO 527 37 64 62 92 Tensile Elongation Break % ASTM D638 8 4 4 4 ISO 527 Flexural Modulus 73°F (23°C) psi ASTM D790 240,000 420,000 695,000 810,000 MPa ISO 178 1650 2900 4800 5600 Notched Izod Impact 73°F (23°C) ft-lb/in ASTM D256 5.0 1.60 1.60 2.50 kJ/m2 ISO 180 27.5 9.00 9.00 14.00 Heat Deflection 66 psi °F ASTM D648 298 313 297 300 °C ISO 75 144 156 152 149 264 psi °F ASTM D648 210 272 265 288 °C ISO 75 92 133 128 142 Linear Shrinkage Range 1/8 in wall % - 0.4–0.7 0.3–0.6 0.3–0.6 0.2–0.5 3.2 mm wall % - 0.4–0.7 0.3–0.6 0.3–0.6 0.2–0.5 Maxxam™ Glass Fiber Reinforced Homopolymer Polypropylene PROPERTY CONDITION UNITS METHOD PRODUCT EXAMPLES Maxxam™ Glass Fiber Reinforced Copolymer Polypropylene 71.866.POLYONE www.polyone.com INJECTION MOLDING POLYPROPYLENE Product Code - - - PP5312 B1 PP5320 A285 PP5330 A123 PP5340 B2 Reinforcement % - % - 12 20 30 40 Specific Gravity 73°F (23°C) - ASTM D792 0.99 1.05 1.15 1.24 ISO 1183 Tensile Strength Yield psi ASTM D638 4800 4400 3600 4900 MPa ISO 527 31 30 32 38 Tensile Elongation Yield % ASTM D638 5 4 4 3 ISO 527 Break % ASTM D638 20 15 20 10 ISO 527 Flexural Modulus 73°F (23°C) psi ASTM D790 285,000 380,000 355,000 460,000 MPa ISO 178 1950 2600 2450 3200 Notched Izod Impact 73°F (23°C) ft-lb/in ASTM D256 0.6 0.55 1.5 0.60 kJ/m2 ISO 180 3.30 3.00 8.25 3.30 Heat Deflection 66 psi °F ASTM D648 235 255 230 280 °C ISO 75 113 124 110 138 264 psi °F ASTM D648 135 156 150 180 °C ISO 75 57 69 66 82 Linear Shrinkage Range 1/8 in wall % - 1.4–1.9 1.0–1.4 1.1–1.5 0.6–1.0 3.2 mm wall % - 1.4–1.9 1.0–1.4 1.1–1.5 0.6–1.0 Offers improved stiffness and heat deflection as well as outstanding dimensional stability. • Chemically coupled • Natural or black • High flow grades • Recycled content Maxxam™ Mica Reinforced Polypropylene PROPERTY CONDITION UNITS METHOD PRODUCT EXAMPLES Maxxam™ Glass/Mineral Reinforced Polypropylene Offers a high level of stiffness and heat deflection as well as reduced warpage and increased dimensional stability. • Chemically coupled • Impact modified • Natural or black • High flow grades • Recycled content Product Code - - - PP5920 B10 PP5935 B1 PP5940 B131 PP5950 B10 Reinforcement Type - - - Glass/Mica Glass/Mica Glass/Mica Glass/Mica Reinforcement % - % - 20 35 40 50 Specific Gravity 73°F (23°C) - ASTM D792 1.05 1.17 1.25 1.34 ISO 1183 Tensile Strength Yield psi ASTM D638 7000 9000 10,000 12,800 MPa ISO 527 Tensile Elongation Break % ASTM D638 6 5 5 2 ISO 527 Flexural Modulus 73°F (23°C) psi ASTM D790 550,000 780,000 870,000 1,300,000 MPa ISO 178 3900 5500 5800 9000 Notched Izod Impact 73°F (23°C) ft-lb/in ASTM D256 0.7 0.9 1.3 1.5 kJ/m2 ISO 180 4.0 5.0 7.0 8.0 Heat Deflection 66 psi °F ASTM D648 304 315 310 315 °C ISO 75 151 157 154 157 264 psi °F ASTM D648 225 298 290 310 °C ISO 75 107 148 143 154 Maxxam™ XST Thermoplastic Olefins (TPO) Offers exceptional stiffness to impact balance including excellent cold temperature impact resistance. • Scratch & mar resistant • Natural, black or colors • High flow grades • UV stabilized Product Code - - - TP9000 A3 TP9110 A701-SM TP9120 B397 TP9120 A525-SM TP9130 A954 Reinforcement Type - - - Talc Talc Talc Talc Talc Reinforcement % - % - 5 11 18 20 30 Specific Gravity 73°F (23°C) - ASTM D792 0.94 0.97 1.01 1.04 1.12 ISO 1183 Tensile Strength Yield psi ASTM D638 2400 3000 2750 3600 3450 MPa ISO 527 18 22 19 25 24 Tensile Elongation Yield % ASTM D638 12 6 5 4 8 ISO 527 Break % ASTM D638 >400 100 170 30 250 ISO 527 Flexural Modulus 73°F (23°C) psi ASTM D790 140,000 260,000 235,000 300,000 325,000 MPa ISO 178 1100 1800 1620 2000 2250 Notched Izod Impact 73°F (23°C) ft-lb/in ASTM D256 No Break 6 10 2 2.2 kJ/m2 ISO 180 68.0 36.0 53.0 11.0 12.0 -30°C ft-lb/in ASTM D256 1.5 1.2 1.3 0.7 0.8 kJ/m2 ISO 180 8.5 6.0 7.0 3.9 4.0 Heat Deflection 66 psi °F ASTM D648 160 208 205 220 218 °C ISO 75 83 98 96 110 105 264 psi °F ASTM D648 100 143 140 160 160 °C ISO 75 50 62 57 70 71 Multiaxial Impact @ 6.6 m/s 0°C ASTM D3763 100% Ductile 100% Ductile 100% Ductile -30°C ASTM D3763 100% Ductile 100% Ductile PROPERTY CONDITION UNITS METHOD PRODUCT EXAMPLES INJECTION MOLDING POLYPROPYLENE 8 91.866.POLYONE www.polyone.com Maxxam™ HST Filled Polypropylene with High Strength and Stiffness Maxxam™ LO Low Odor Talc-Filled Polypropylene Reinforced grades that provide exceptional levels of strength and stiffness. Formulated for underhood automotive HVAC use to minimize unwanted odor while reducing VOC emissions. • Chemically coupled • Natural or black • High flow grades • Provides heat stabilization • Excellent balance of properties • Natural, black or custom colors Product Code - - - PX5430 B1 PX5435 B1 PX5440 B1 PX5450 B1 Reinforcement Type - - - Glass Glass Glass Glass Reinforcement % - % - 30 35 40 50 Specific Gravity 73°F (23°C) - ISO 1183 1.13 1.18 1.23 1.35 Tensile Strength Yield MPa ISO 527 102 105 113 130 Flexural Modulus 73°F (23°C) MPa ISO 178 6500 8000 9400 11,500 Notched Izod Impact 73°F (23°C) kJ/m2 ISO 180 9.4 9.3 11.0 12.0 Heat Deflection 264 psi °C ISO 75 152 152 153 154 Product Code - - - PP5120 B270-LO MFR g/10 min ISO 1133 12 Tensile Modulus MPa ISO 527 3320 Tensile Stress Yield MPa ISO 527 32 Tensile Elongation Yield % ISO 527 4.6 Tensile Elongation Break % ISO 527 17 Flexural Modulus MPa ISO 178 3000 Charpy Impact 73°F (23°C) kJ/m2 ISO 179/1eU 38 Heat Aging 150°C h VW 44045 700 hr VOC µg/g VDA 278 23.5 Fog µg/g VDA 278 30.5 Carbon Emissions µgC/g VDA 277 18 Odor Grade VDA 270 B3 3 • High flow grades • UV stabilized PROPERTY CONDITION UNITS METHOD PRODUCT EXAMPLES INJECTION MOLDING POLYPROPYLENE PROPERTY CONDITION UNITS METHOD PRODUCT EXAMPLES 10 Maxxam™ Filled & Reinforced Polypropylene A range of melt flows to process well in sheet extrusion, thermoforming, profile extrusion and blow molding operations. • FDA certifiable • Scratch & mar resistant • Impact modified • Natural, black or colors • UV stabilized • Chemically coupled EXTRUSION & BLOW MOLDING POLYPROPYLENE Product Code - - - EP6713 B1 EP6130 B10 EP6430 B1 EP5240 B145 EP7920 B1 Reinforcement Type - - - Talc Mineral Glass CaCO3 Glass/ Mineral Reinforcement % - % - 13 30 30 40 20 Specific Gravity 73°F (23°C) - ASTM D792 0.99 1.12 1.12 1.25 1.05 ISO 1183 Tensile Strength Yield psi ASTM D638 4800 4200 10,000 3600 6500 MPa ISO 527 31 29 69 35 45 Tensile Elongation Yield % ASTM D638 6 8 2 5 6 ISO 527 Break % ASTM D638 100 110 5 70 100 ISO 527 Flexural Modulus 73°F (23°C) psi ASTM D790 325,000 360,000 850,000 350,000 400,000 MPa ISO 178 2250 2400 5800 2400 2750 Notched Izod Impact 73°F (23°C) ft-lb/in ASTM D256 4.0 1.5 4.3 1.1 2.4 kJ/m2 ISO 180 20.0 8.0 24.0 6.0 13.0 Heat Deflection 66 psi °F ASTM D648 230 242 315 240 293 °C ISO 75 110 115 157 116 145 264 psi °F ASTM D648 130 158 270 140 212 °C ISO 75 54 68 132 60 100 PROPERTY CONDITION UNITS METHOD PRODUCT EXAMPLES 111.866.POLYONE www.polyone.com EXTRUSION & BLOW MOLDING POLYPROPYLENE Maxxam™ Filled & Reinforced High Density Polyethylene Specifically designed for blow molding and sheet extrusion/thermoforming of structural parts.

Voici quelques domaines clés dont vous devez avoir connaissance. 3 Contenu Politique antitrust révisée 2021 Les trois points suivants méritent une attention et un accent particuliers : Premièrement, il n’est pas nécessaire d’avoir un accord écrit formel pour enfreindre la loi. Politique antitrust révisée 2021 4 Contenu 3. Évitez même l’apparence de tels accords et évitez les circonstances où de tels accords pourraient se produire. 3.

Scan your color standard using a spectrophotometer. 3.

Mold to compress and cool into shape 4 CFRTP is preheated and inserted into tool 3 Material heating, melting, and conveying 2 Solid resin infeed 1 5 ON-ROAD TRANSPORTATION Underbody shields, underhood enclosures, interior components, storage OFF-ROAD VEHICLES Skid plates, doors, seat structures, exterior panels & moldings Traditionally, molding with short and long glass-filled polypropylene to gain flexural performance over unfilled polypropylene also results in a loss of impact resistance.

Avient Technical Service will order and deliver a 1L or 3L PlanetPak trial kit to your site. 3.

Uranusweg 3 8938 AJ Leeuwarden The Netherlands +31(0) 58 216 75 99 info@fiber-line.com NOTICE: The information and data contained herein do not constitute sales specifications.

GUIDELINES FOR USING CESA CLEAN ADDITIVES • Cesa Clean works best when molded maintaining normal (injection) pressure/shear • For best results, Avient recommends a “Running Color Change” which eliminates breaks in the molding cycle • Since the Cesa Clean concentrate will expand, it is recommended to reduce the shot size by 20% • It is designed for use at a let-down ratio (LDR) of 3.0% or (33:1); however, use rate can vary depending on the severity of the contamination but typically is 2.0–4.0% (a use rate higher than 6.0% may not have any positive affect on the cleaning performance) • Using Cesa Clean as a routine part of your color change rotation will allow faster changes and consume a minimal amount of raw material - Note: If the manifold is not cleaned routinely, this process may be more time consuming and additional material will be required • It is best to process at your normal polymer processing temperatures - For best performance, stock temperature should be at least 400°F - If 400°F is achieved during the purging process, no additional activation will occur during the reprocessing of regrind - All parts produced during the “Running Purge Cycle” should be captured as regrind, resulting in a scrap-free color change - If using sequential gates, open and close all gates at the same time while purging the tool - If contamination appears to be coming from one gate, open and close first, and for an extended period of time, to force more material through this location - When cleaning in this manner, pay close attention to shot size - Parts containing the previous or new color plus any Cesa Clean can be used as regrind INTRODUCING CESA CLEAN TO YOUR PROCESS Hand Blend • Hand weigh enough of the Cesa Clean and natural resin mix to equate to 3–5 times the barrel capacity • Use rate should be 3.0% or 33:1 for routine cleaning • For difficult-to-clean tooling, or tooling which is not routinely cleaned, start at 4.0% or 25:1 • Note: Do not attempt to vacuum load more than 15 feet from source as stratification/separation may occur Volumetric Feeder • Calibrate feeder to dispense 3.0% or 33:1 for routine cleaning • For difficult-to-clean tooling, or tooling which is not routinely cleaned, start at 4.0% or 25:1 • This style of feeder is highly recommended for at-the-throat metering of Cesa Clean Blending Units Most blenders have an extra bin for an additive • Fill the additive bin with Cesa Clean • Set blender to introduce the Cesa Clean at 2.0 to 4.0% • Note: Do not air convey any further than 15 feet as Cesa Clean has a high density and may separate from the mix.

ENGINEERED POLYMER SOLUTIONS - FEATURES & CHARACTERISTICS Resin Nymax™ Formulations Characteristics Applications PA6 GF 600 A 14 Natural 14% Glass Reinforced Stocks, Frames, Receivers, Handguards, Forearms, Picatinny Rails, Grips PA6 GF 600 A 33 Natural 33% Glass Reinforced, Heat Stabilized PA6 NM6000-0026 HI BK 33% Glass Reinforced, Toughened PA6 GF 600 A 60 UV Black 60% Glass Reinforced, Heat Stabilized PA6 GF 600 A 33 Black 28 V 33% Glass Reinforced, Heat Stabilized, UV PA6 1010 A Black 13 Super Toughened, Heat Stabilized PA6 1010 A Natural Super Toughened, Heat Stabilized PA6 NM6000-0027 ST Black Super Toughened PA6 NM6000-00013 HS UV Black 50% GF, High Flow PA6 PA66 NM6600-0018 HI HS 14 Nat 14% Glass Reinforced, Toughened, Heat Stabilized PA66 GF 1200 A 33 HS Black 22 33% Glass Reinforced, Heat Stabilized PA66 GF 1200 A 33 HS Natural 33% Glass Reinforced, Heat Stabilized PA66 NM6600-0019 HI HS 33 Nat 33% Glass Reinforced, Toughened, Heat Stabilized PA66 NM6600-0020 HI HS 43 Nat 43% Glass Reinforced, Heat Stabilized PA66 1200 A L Natural Unreinforced PA66 1200 A ZIP 22 Natural Unreinforced PA66 NM6600-0021 ST Black Super Toughened PA66 NM 1200 MT HS Black Toughened, Heat Stabilized PA66 NM 1200 MT HS Natural Toughened, Heat Stabilized Specialty Products Color Characteristics Applications Edgetek™ ET6200-0031 Black Black 20% Glass Reinforced PA12 Stocks, Frames, Receivers, Handguards, Forearms, Picatinny Rails, Bolt Carriers, Grips Gravi-Tech™ X GT 33991-05A-01-3 Copper 3sg, PA6, Copper Gravi-Tech™ X GT-30197-001-P4 Gray 4sg, PA610, Tungston Gravi-Tech™ GT 6400-0001 GRV 5.0 Black 5sg, PA610, Tungston Thermoplastic Elastomers Durometer OM Substrate Color Characteristics Applications OnFlex™ AF 7210 25-90A PP Black/Natural General Purpose with UV Stabilizer Grips, Recoil Pads, Gun Straps Dynaflex™ G7900 30-90A PP Black/Natural General Purpose Versaflex™ XP 2850 50A PP Natural Wet Grip Technology Versaflex™ VDT 4202-40 40A PP Black/Natural Vibration Damping Versaflex™ VDT 5120-40 40A PA Black/Natural Vibration Damping Versaflex™ OM6059-9 60A PA Black High Flow Versaflex™ OM6258 60A PA Black/Natural Enhanced Bond