Our combined expertise was key,” said Jerry Edwards, treasurer and co-owner of Edwards Design & Fabrication, Inc.

Better than expected results were driven by the Specialty Engineered Materials segment, including record operating income from Advanced Composites platform The better than expected earnings were driven primarily by record performance from Advanced Composites. 

KEY PERFORMANCE PROPERTIES1 PHYSICAL NOMINAL VALUE UNIT TEST METHOD Density/Specific Gravity 1.00 ASTM D792 Melt Mass-Flow Rate (MFR) (230°C/2.16kg) 20 g/10 min ASTM D1238 MECHANICAL Tensile Strength 15.0 MPa ASTM D638 Flexural Modulus 1400 MPa ASTM D790 Flexural Strength 35.0 MPa ASTM D790 IMPACT Notched Izod Impact (Injection Molded) 150 J/m ASTM D256 ELECTRICAL Surface Resistivity < 100000 ohms/sq ASTM D257 PROCESSING INFORMATION INJECTION NOMINAL VALUE UNIT Drying Temperature 80 to 90 °C Drying Time 4.0 to 6.0 hr Processing (Melt) Temperature 220 to 250 °C Mold Temperature 30 to 80 °C Trilliant™ HC Electrically Conductive Formulations for Precision Performance Pipette Tips A critical design consideration for pipette tips is the accurate measurement of finite amounts of liquid.

GLASFORMS™ ELECTRICAL COMPONENTS Composite Materials for Power Transmission and Distribution Products APPLICATION & PRODUCT SELECTION GUIDE KEY CHARACTERISTICS Extend the service life of electrical transmission and distribution products with Glasforms composite technologies.

KEY CHARACTERISTICS Avient CRTM panels offer significant benefits to customers, including: • Superior strength to weight ratio • �Unlimited length capability; widths up to 108" • �Thermal insulation • Ultra-low thermal conductivity • �Customized density, thickness, weight and color • �Vibration damping and acoustic insulation • Chemical and corrosion resistance • Consistent cross-sections and quality PRODUCT BULLETIN Other thicknesses/architectures are available.

This technology offers manufacturing efficiencies versus other crosslinking methods: • Reduction in logistics management: No secondary steps after manufacturing; no need for E-beam radiation for effective crosslinking • Rapid ambient curing: Typically in less than 15 days depending on the climatic condition, wall thickness and catalyst level • No additional capital investment: The material can be processed on a conventional extrusion line • Easy handling: ECCOH XL 8001 is used with 2.5–5% of catalyst masterbatch • No pre-drying: No need to pre-dry the material if it is stored correctly PRODUCT BULLETIN KEY CHARACTERISTICS Avient’s ECCOH line of highly flame retardant, non-halogenated materials limits the emission of corrosive gases when burning.

TECHNICAL BULLETIN Characteristics Artisan™ Nylon Solution Painted Metal Painted Plastic Traditional Molded-in Color Impact Modified Nylon PA Ionomer Alloy Aesthetic Very Good Excellent Excellent Good Very Good Very Good Scratch Appearance Excellent Poor Poor Good Excellent Excellent Scratch & Mar Resistance Very Good Excellent Excellent Poor Very Good Excellent Color Customization Good Excellent Excellent Very Good Good Good Stress Whitening Excellent Fair Fair Poor Excellent Excellent Weatherability Good Excellent Excellent Very Good Good Very Good Temperature Performance Good Excellent Fair Fair Fair Good Corrosion Resistance Excellent Fair Excellent Excellent Excellent Excellent Processability One Step Multi Step Multi Step One Step One Step Complex One Step Total Production Cost $$$ $$$$$ $$$$ $$ $$$ $$$$ Order Quantity Restrictions Some Some Some None More More COMPARISON OF NYLON, METAL, AND PLASTIC Properties Test Method Artisan™ AR6000-0007 HI UV* Gloss Level** Gloss reading at 60 degrees 80-93 Molding Shrinkage – Across Flow ASTM D955 0.009 to 0.013 in/in Tensile Strength (Yield) ASTM D638 7300 psi Tensile Strength (Break) ASTM D638 5300 psi Tensile Elongation (Yield) ASTM D638 6.0% Flexural Modulus ASTM D790 270500 psi Flexural Strength (Yield) ASTM D790 9950 psi Notched Izod Impact ASTM D256 -4°F (-20°C) 5 ft-lb/in 73°F (23°C) 11 ft-lb/in Unnotched Izod Impact ASTM D256 -4°F (-20°C) 29 ft-lb/in 73°F (23°C) 30 ft-lb/in Color & Aesthetics*** Green, medium blue, dark blue, red, orange, white, gray, black Color customization available based on specific needs KEY PROPERTIES Features: high-gloss finish, UV stability, scratch resistance, chemical/corrosion resistance, cold temperature impact resistance, heat resistance * Reflects average of several colors, properties shift slightly depending on color ** Gloss level varies based on tooling temperature *** UV data available upon request Copyright © 2023, Avient Corporation.

KEY CHARACTERISTICS ECCOH 5924 ECCOH 5981 ECCOH 5983 UV Material Standards BS7655-6, 1 (LTS1–4), BS6724, IEC 60502 BS7655-6, 1 (LTS3) BS7655-6, 1 (LTS1–4) Tear Strength at 23°C 7.7 N/mm 10 N/mm 11 N/mm Tear Strength at 65°C 2.3 N/mm 5 N/mm 6.5 N/mm Hot Pressure Test (6h at 90°C) 39% –

KEY CHARACTERISTICS • Radiation shielding performance • Reduced health and environmental impact • Part consolidation • Design freedom • System cost reduction TARGET MARKET AND APPLICATIONS Trilliant XR thermoplastics are ideal for use in healthcare applications where lead is commonly used to shield X-ray energy.

KEY CHARACTERISTICS • Formulated with 25–100% recycled resin from PIR & PCR sources • Reduces waste and supports the circular economy • Achieves equivalent performance to standard polyolefin formulations • Can be recycled at end of life • Provides good stiffness, durability, impact resistance and UV stability • Enables customized performance characteristics depending on application need MARKETS AND APPLICATIONS Maxxam REC Polyolefins are suitable for use across many industries and applications where traditional polyolefin materials are used, including: • Transportation - HVAC systems, engine guards, battery housings, flame retardant applications • Industrial - Structural parts, furniture • Consumer - Household appliances, personal care items, packaging, office supplies, food contact applications • Electrical and Electronic – Housings, buttons, junction boxes SUSTAINABILITY BENEFITS • Formulated with 25–100% recycled resin from PIR and/or PCR sources • Reduces waste and supports the circular economy • Reduces carbon footprint • Can be recycled at end of life PRODUCT BULLETIN CHARACTERISTICS UNITS Maxxam REC RS5200-5029 C BLACK X2 Maxxam REC MX5200-5036 HS I BLACK Maxxam REC MX5200-5037 Maxxam REC MX5200-5038 Maxxam REC MX5200-5039 Filler/ Reinforcement – Unfilled Unfilled 20% Mineral 40% Mineral 30% Glass Fiber Recycled Content – 95% PCR 97% PIR 75% PIR 55% PIR 65% PIR Density (ISO 1183) g/ccm 0.93 0.95 1.09 1.28 1.15 Tensile Modulus (ISO 527-1) MPa 1250 950 1500 2150 4250 Tensile Stress (ISO 527-2) MPa 25 175 10 15 50 Tensile Strain Break (ISO 527-2) % >20 >80 >30 17 4.5 Charpy Notched (ISO 179) kJ/m 3 8 5 4 11 TECHNICAL PERFORMANCE CHARACTERISTICS UNITS Maxxam REC RS5200-5026 RS NHFR BLACK 70 Maxxam REC FR H8 V2 BLACK RG 70 Maxxam REC L6 GF/30 H BLACK T RG 70 Maxxam REC MX5200-5027 RS HS BLACK RG Maxxam REC MX5200-5028 RS HS BLACK RG Maxxam REC C10 H-UV AS EP RG BLACK 70 Filler/ Reinforcement – 30% Glass Fiber Unfilled 30% Glass Fiber 30% Glass Fiber 40% Talcum Unfilled Recycled Content – 37% PIR 90% PIR 55% PIR 35% PIR 50% PIR 25% PIR Density (ISO 1183) g/ccm 1.42 0.950 1.13 1.15 1.23 1.03 Tensile Modulus (ISO 527-1) MPa 8250 1300 6100 6400 – 700 Tensile Stress (ISO 527-2) MPa 71.0 30.0 70.0 70.0 28.0 15.0 Notched Izod (ISO 180) kJ/m – 4.0 10 5.8 2.7 No Break Flame Rating @ 1.6mm thickness (UL 94) – V-0 V-2 HB HB HB HB TECHNICAL PERFORMANCE Copyright © 2023, Avient Corporation.