Date Of Certification: 11 December 2024 Date Of Expiration: 10 December 2027 IATF Certificate N°: 0558656 Bureau Veritas Certification Certificate No: FR094003 - IATF Revision: 1 For Bureau Veritas Certification Holding, Tour ALTO, 4 place des saisons, 92400 COURBEVOIE – France (The official document is in English. Any translations of this document shall be used for reference only.) 1/2 Certificate of Approval AWARDED TO PolyOne France Tossiat Route de la vavrette, 01250, Tossiat - France IATF USI: LWZS4P Bureau Veritas Certification certify that the Quality Management System of the above organisation has been audited and found to be in accordance with the requirements of IATF 16949 - FIRST EDITION and the applicable customer specific requirements SCOPE Design and manufacturing PERMITTED EXCLUSION(S) None PRODUCT(S) DELIVERED colour with additive concentrates for thermoplastic resins and speciality compounds obtained by mixing and extrusion https://e-cer.bureauveritas.com/68LJQE0ZV0CO6I7YW0YSXOUMV9WWROQPHPI2AOHRRLFFVRAVTFVZGXKWIE3TOWLTTKEWCPQB9UNAPXHH6T0HXOMUEDVYPRPJLEXBBTKQYPBRICYOKY143TECQ5UMHGA3JX Date Of Certification: 11 December 2024 Date Of Expiration: 10 December 2027 IATF Certificate N°: 0558656 Bureau Veritas Certification Certificate No: FR094003 - IATF Revision: 1 For Bureau Veritas Certification Holding, Tour ALTO, 4 place des saisons, 92400 COURBEVOIE – France (The official document is in English.

These additives allow the filter to hold its electret charge longer, helping to prolong its shelf life and ensuring that particles as small as 0.3 microns are trapped. Avient To Hold Second Quarter 2025 Conference Call...

Avient To Hold Second Quarter 2025 Conference Call... Avient To Hold Second Quarter 2025 Conference Call...

Altice holds a bachelor’s of science degree in chemical engineering from Missouri University of Science and Technology. Avient To Hold Second Quarter 2025 Conference Call...

Avient holds this process as a standard with all suppliers, thus reducing third-party supply chain risk. Wulfsohn Former Chairman and Chief Executive Officer, Ashland Global Holdings, Inc. GRI 408: Child Labor 103–1, 2 and 3 Management approach—GRI 103 Product—Supplier Collaboration Page 48 Avient’s Human Rights Policy Page 29 Avient Supplier Code of Conduct 408–1 Operations and suppliers at significant risk for incidents of child labor Product—Supplier Collaboration Page 48 To our knowledge, Avient’s operations do not have a significant risk of child labor.

For more information, see Create Custom Views section in this guide. 3 POs can have the following statuses: Status Description Buyer Hold The PO is approved but pending buyer review Cancelled The PO is cancelled and does not need to be fulfilled Closed The issued PO was received and then closed, either manually or automatically within Coupa Currency Hold The PO is on hold due to a currency exchange rate issue Issued The PO was approved and sent to you (the supplier) Soft Closed The PO is closed but can be reopened.

Barrel Temperatures °F (°C) PP Mineral-Filled PP Glass-Filled PP HDPE LDPE Rear Zone 360–390 (182–200) 400–420 (204–216) 415–435 (213–224) 400–420 (204–216) 370–390 (188–199) Center Zone 370–400 (188–204) 410–430 (210–221) 425–445 (218–229) 410–430 (210–221) 380–400 (193–204) Front Zone 390–410 (200–210) 420–440 (216–227) 435–455 (224–235) 420–440 (216–227) 390–410 (199–210) Nozzle 400–425 (204–219) 415–435 (213–224) 430–450 (221–232) 430–450 (221–232) 400–425 (204–219) Melt Temperature 400–425 (204–219) 415–435 (213–224) 430–450 (221–232) 430–450 (221–232) 400 - 425 (204–219) Mold Temperature °F (°C) 60–120 (16–49) Pack & Hold Pressure 50–75% of injection pressure Injection Velocity (in/s) 1.0–3.0 Back Pressure (psi) 50–100 Screw Speed (rpm) 30–100 Drying Parameters Hours @ °F (°C) Not typically required. Increase the vent depth to 0.010" at 0.100" away from the cavity and vent to atmosphere. • Vents should be placed at the intersection of each 90° bend in the runner system off of the cold slug well and vented to atmosphere PROBLEM CAUSE SOLUTION Black Specks Contamination • Purge barrel with general purpose PP • Verify correct nozzle is being used • Pull screw for cleaning Degraded/overheated material • Decrease melt temperature • Decrease back pressure • Decrease injection speed • Use appropriately sized barrel Brittleness Degraded/overheated material • Decrease melt temperature • Decrease back pressure • Decrease injection speed • Use appropriately sized barrel Gate location and/or size • Relocate gate to nonstress area • Increase gate size to allow higher flow rate and lower molded-in stress Burning Process related • Decrease nozzle and barrel temperatures • Decrease mold temperature • Decrease injection rate Mold design • Clean, widen and increase number of vents • Increase gate size to reduce shear Fibers/Minerals on Surface or Uneven Surface Appearance Melt temperature too low • Increase melt temperature • Increase mold temperature • Increase injection speed Insufficient packing • Increase hold pressure and time • Increase shot size Flash Injection pressure too high • Decrease injection pressure • Increase clamp pressure • Decrease injection rate • Increase transfer position Excess material volume • Adjust transfer position • Decrease pack pressure • Decrease shot size • Decrease injection rate Melt and/or mold too hot • Decrease nozzle and barrel temperatures • Decrease mold temperature • Decrease screw speed Loose clamp • Reset mold height • Increase clamp tonnage Troubleshooting Recommendations PROBLEM CAUSE SOLUTION Incomplete Fill Melt and/or mold too cold • Increase nozzle and barrel temperatures • Increase mold temperature • Increase injection rate Mold design • Enlarge or widen vents and increase number of vents • Check that vents are unplugged • Check that gates are unplugged • Enlarge gates and/or runners • Perform short shots to determine fill pattern and verify proper vent location • Increase wall thickness to move gas trap to parting line Shot size • Adjust transfer position to 98% full • Increase shot size Nozzle Drool Nozzle temperature too hot • Decrease nozzle temperature • Decrease back pressure • Increase screw decompression Shrink Too much shrink • Increase cooling time • Decrease mold temperature Too little shrink • Decrease cooling time • Increase mold temperature Sink Marks Part geometry too thick • Reduce wall thickness • Reduce rib thickness Melt too hot • Decrease nozzle and barrel temperatures • Decrease mold temperature Insufficient material volume • Adjust transfer position • Increase shot size • Increase injection rate • Increase packing pressure Troubleshooting Recommendations (continued) PROBLEM CAUSE SOLUTION Sticking in Mold Overfilled cavity • Decrease injection rate and pressure • Decrease hold pressure • Adjust transfer position • Decrease nozzle and barrel temperatures • Decrease mold temperature • Decrease cooling time Mold design • Increase draft angle • Polish cores in direction of ejection Part is too hot • Decrease nozzle and barrel temperatures • Decrease mold temperature • Increase cooling time Warp Process related • Increase cooling time • Increase melt temperature • Increase pack pressure • Increase pack time • Decrease mold temperature Mold design • Inspect for non-uniform mold cooling Part design • Inspect for non-uniform wall thickness Temperature control unit incorrect temperature • Check settings • Inspect thermocouple Weld Lines Melt front temperatures are too low • Increase pack and hold pressure • Increase melt temperature • Increase injection rate • Increase mold temperature Mold design • Increase gate size • Perform short shots to determine fill pattern and verify proper vent location • Add vents and/or false ejector pin • Move gate location 1.844.4AVIENT www.avient.com Copyright © 2022, Avient Corporation.

Any translations of this document shall be used for reference only.) and the applicable customer specific requirements Revision:1 For Bureau Veritas Certification Holding, Le Triangle de l'Arche, 8 Cours du Triangle - 92800 Puteaux - France None Bureau Veritas Certification Certificate N°: FR072877- IATF IATF Certificate N°: 442787 Date Of Expiration: 01-February-2025 Date Of Certification: 02-February-2022 PRODUCT(S) DELIVERED colour with additive concentrates for thermoplastic resins and speciality compounds obtained by mixing and extrusion PERMITTED EXCLUSION(S) SCOPE Design and manufacturing Bureau Veritas Certification certify that the Quality Management System of the above organisation has been audited and found to be in accordance with the requirements of Route de la Vavrette, 01250, TOSSIAT France PolyOne France Tossiat Awarded to Certificate of Approval https://e-cer.bureauveritas.com/FMSNR3ILR1QPBBMGXNKFUDB2LWB28AYDXJNZADBZ8WDH3QYML73QK0B7L7V6CZQPGPGDYLG2UVXWEPJVT4Q0E4Z0DOKSEXCP0BNO7K2WUHCQB2Q9ORVVTV4F9DTN2UI35L https://e-cer.bureauveritas.com/FMSNR3ILR1QPBBMGXNKFUDB2LWB28AYDXJNZADBZ8WDH3QYML73QK0B7L7V6CZQPGPGDYLG2UVXWEPJVT4Q0E4Z0DOKSEXCP0BNO7K2WUHCQB2Q9ORVVTV4F9DTN2UI35L https://e-cer.bureauveritas.com/FMSNR3ILR1QPBBMGXNKFUDB2LWB28AYDXJNZADBZ8WDH3QYML73QK0B7L7V6CZQPGPGDYLG2UVXWEPJVT4Q0E4Z0DOKSEXCP0BNO7K2WUHCQB2Q9ORVVTV4F9DTN2UI35L https://e-cer.bureauveritas.com/FMSNR3ILR1QPBBMGXNKFUDB2LWB28AYDXJNZADBZ8WDH3QYML73QK0B7L7V6CZQPGPGDYLG2UVXWEPJVT4Q0E4Z0DOKSEXCP0BNO7K2WUHCQB2Q9ORVVTV4F9DTN2UI35L https://e-cer.bureauveritas.com/FMSNR3ILR1QPBBMGXNKFUDB2LWB28AYDXJNZADBZ8WDH3QYML73QK0B7L7V6CZQPGPGDYLG2UVXWEPJVT4Q0E4Z0DOKSEXCP0BNO7K2WUHCQB2Q9ORVVTV4F9DTN2UI35L https://e-cer.bureauveritas.com/FMSNR3ILR1QPBBMGXNKFUDB2LWB28AYDXJNZADBZ8WDH3QYML73QK0B7L7V6CZQPGPGDYLG2UVXWEPJVT4Q0E4Z0DOKSEXCP0BNO7K2WUHCQB2Q9ORVVTV4F9DTN2UI35L https://e-cer.bureauveritas.com/FMSNR3ILR1QPBBMGXNKFUDB2LWB28AYDXJNZADBZ8WDH3QYML73QK0B7L7V6CZQPGPGDYLG2UVXWEPJVT4Q0E4Z0DOKSEXCP0BNO7K2WUHCQB2Q9ORVVTV4F9DTN2UI35L REMOTE SUPPORT FUNCTION(S) (The official document is in English. Revision:1 For Bureau Veritas Certification Holding, Le Triangle de l'Arche, 8 Cours du Triangle - 92800 Puteaux - France Bureau Veritas Certification Certificate N°: FR072877- IATF IATF Certificate N°: 442787 Date Of Expiration: 01-February-2025 Date Of Certification: 02-February-2022 Route de la Vavrette, 01250, TOSSIAT France PolyOne France Tossiat Awarded to Appendix to the Certificate of Approval Name Address Scope AVIENT LUXEMBOURG ROUTE DE BASTOGNE, 19, 9836, POMMERLOCH Luxembourg Logistic, Supplier Management, Purchasing PolyOne Europe Logistics 7 rue Blériot, 4460, GRACE HOLLOGNE Belgium Warehousing Polyone Europe ul.

Infant & Child Products

Infant & Child Products