Seller may, during any period of shortage due to any cause, prorate, and allocate its supply of such materials among itself for its own consumption, its subsidiaries, affiliated companies, its accepted orders, contract customers, and its regular customers not then under contract in such a manner as may be deemed fair and reasonable by Seller. During periods when demand for Product exceeds Seller’s capability to supply, whether due to a force majeure or otherwise, Seller may distribute Product among itself for its own uses, Buyer, and other customers, in such manner as Seller deems fair and practicable. If required to enable any competent authority or agency to verify compliance with Trade Control Laws, Buyer shall, if so requested by Seller, promptly provide Seller with all information pertaining to the particular end customer, the particular destination and the particular intended use of the Products and any other relevant information with regard to existing Trade Control Laws.

Even more, our manufacturing capabilities are flexible and easily adaptable to changing customer needs. 25 We are a specialty formulator that enables many of the world’s products through innovation and custom solutions. Simply put… We solve customers’ most pressing material science challenges.

Seller may, during any period of shortage due to any cause, prorate, and allocate its supply of such materials among itself for its own consumption, its subsidiaries, affiliated companies, its accepted orders, contract customers, and its regular customers not then under contract in such a manner as may be deemed fair and reasonable by Seller. During periods when demand for Product exceeds Seller’s capability to supply, whether due to a force majeure or otherwise, Seller may distribute Product among itself for its own uses, Buyer, and other customers, in such manner as Seller deems fair and practicable. Buyer shall disseminate such information so as to give warning of possible hazards to persons whom Buyer can reasonably foresee may receive exposure to such hazards, including, but not limited to, Buyer’s employees, agents, contractors and customers.

In no event shall Seller have any responsibility to Buyer or its customers for indirect losses and damages or loss of profits. Seller may, during any period of shortage due to any cause, prorate, and allocate its supply of such materials among itself for its own consumption, its subsidiaries, affiliated companies, its accepted orders, contract customers, and its regular customers not then under contract in such a manner as may be deemed fair and reasonable by Seller. During periods when demand for Product exceeds Seller’s available supply, whether due to a force majeure or otherwise, Seller may distribute Product among itself for its own manufacturing uses, its customers, and Buyer in such manner as Seller deems fair and practicable.

COLORANT DISPERSIONS RUBBER COLORANT DISPERSIONS Stan-Tone™ MB/MC & EP Stan-Tone™ MB/MC & EP are pigment dispersions for rubber systems, available in customizable binder systems suited for nitrile, EPR, EPDM, SBR, natural rubber, CPE and EVA compounds Applications: industrial goods, auto mats, rubber flooring, sponge rubber, wire and cable URETHANE COLORANT DISPERSIONS Polyester Urethane Paste Colorants: Stan-Tone™ PEP Stan-Tone™ PEP colorants are reactive and compatible with polyester systems, reacting to become part of the final cured product Applications: cast urethane wheels, industrial rollers, rigid foams, adhesives, laminates, pultrusion, glass reinforced composites, coated fabrics Polyether Urethane Paste Colorants: Stan-Tone™ ET Stan-Tone™ ET colorants for urethane are compatible with polyether systems, reacting to become part of the final cured product Applications: flexible foam, cast-able rolls and wheels, adhesives and laminates EPOXY COLORANT DISPERSIONS Stan-Tone™ EPX Stan-Tone™ EPX consists of selected pigments dispersed in a Bisphenol A undiluted epoxy resin with an epoxide equivalent of 185 Applications: protective coatings, adhesives, epoxy flooring, electrical potting and laminates VINYL COLORANT DISPERSIONS Stan-Tone™ VC & VCP Stan-Tone™ VC and VCP are products based on single pigment or multi-pigment blends and are designed for applications in which dispersion, uniformity, compatibility and cleanliness are essential Applications: profile extrusions, decking, outdoor furniture, calendaring applications Plasticizer-Based Colorants for Vinyl Paste: Stan-Tone™ HCC Stan-Tone™ HCC dispersions consist of selected pigments dispersed in diisodecyl phthalate plasticizer (DIDP) and are designed for applications in which dispersion, uniformity, compatibility and cleanliness are essential Applications: coated fabric, vinyl sealants, adhesives, wall coverings, toys and sporting goods SILICONE COLORANT DISPERSIONS Liquid Silicone Colorants: Silcopas™ Stan-Tone™ SP or FSP (FDA-compliant) Silcotec™ SL Stan-Tone™ HC Plus LSR (class VI certified) Silicone paste colorants are single pigment or custom- made dispersions using a silicone carrier specially developed for liquid silicone rubber (LSR) injection molding applications Applications: infant care, toys, seals, gaskets and medical equipment High Consistency Silicone Rubber Colorants: Silcogum™ Silcotec™ S Stan-Tone™ SMB Stan-Tone™ HC Plus HCR (class VI certified) Silicone rubber colorants are made with a silicone elastomer gum binder resulting in cuttable masterbatches or slabs for ease of handling, especially for 2-roll, open-mill mixing Applications: mechanical seals, keypads, gaskets, wire and cable jacketing Room Temperature Vulcanization Colorants: Silcopas™ RTV and Stan-Tone™ SP Silcopas™ RTV and Stan-Tone™ SP colorants offer a standard line of single pigment or custom made dispersions using a low viscosity dimethyl fluid specially developed for room temperature vulcanization (RTV) rubber Applications: caulks, sealants, adhesives WATER-BASED COLORANT DISPERSIONS Water-Based Liquid Colorants: Stan-Tone™ WDN Stan-Tone™ WDN water dispersions are high-solids organic or inorganic pigment dispersions designed to help meet standards for dispersion including pH levels and strength and shade Applications: dipped latex balloons and gloves, coatings and adhesive systems ADDITIVE DISPERSIONS AQUEOUS ADDITIVE DISPERSIONS Aquamix™ Aquamix™ chemical dispersions are a full line of dispersed and emulsified curatives, antioxidants, fillers, vulcanizers, optical brighteners, flame retardants, UV stabilizers and tackifiers Applications: adhesives and latex compounding, curatives SILICONE ADDITIVE DISPERSIONS Electrically Conductive Additives for Silicone: Silcosperse™ EC Silcosperse™ EC electrically conductive additives provide high conductivity and lower filler loadings Applications: resistors, printable electronics, flexible electronics, insulator depolarizers Laser Marking Additives for Silicone: Silcosperse™ LM Silcosperse™ LM laser marking additives are dispersions that contain laser absorbers and color formers that eliminate the need for secondary etching Applications: medical device housings, electronic device housings, wire and cable jacketing Peroxide Additives for Silicone: Silcocat™ Silcocat™ dispersions can improve silicone molding process by stabilizing silicone peroxide compound levels Applications: automotive hoses, seals, gaskets Heat Stabilizer Additives for Silicone: Silcosperse™ The Silcosperse™ family of heat stabilizing additives provide a high quality dispersion into silicone designed to enhance heat resistance of silicone compounds Mold Release Additives for Silicone: Silcosperse™ IMR Silcosperse™ IMR is an internal mold release dispersion designed to be added to the silicone or fluorosilicone compound to facilitate the de-molding of finished parts Acid Acceptor Additives for Silicone: Silcosperse™ 180 Silcosperse™ 180 acid acceptor is a premium dispersion used to neutralize acid by-products generated by certain peroxides Viscosity Modifiers for Silicone: Silcosperse™ 237 Silcosperse™ 237 modifier dispersions are designed to raise or control the viscosity without changing solid content SPECIALTY PRODUCTS DRY POWDER COLORANTS Stan-Tone™ D and Stan-Tone™ DC Stan-Tone™ D and Stan-Tone™ DC are dry powder pigments available in a range of hues and chemical types WET OR DRY BLEND COLORANTS Stan-Tone™ DB Stan-Tone™ DB dry blend colorants provide enhanced performance over dry colors, resulting in uniform critical pigment weight ratios for improved color control SELF-BONDING SILICONE Silcotec™ SCB Silcotec™ SCB self-bonding silicone solutions allow silicone to bond to various substrates without prime coating To learn more about our colorant & additive dispersions, please contact us at +1.844.4AVIENT (1.844.428.4368) or visit www.avient.com.

Parts Cost Surplus Stock Carbon Footprint Power Consumption Production Time TPE Benefits TPEs can reduce: TPE Applications TPEs can used to produce: Better grips on instruments Easy branding Easy-to-open pill bottles Needs to Meet Future Growth 2010 TPE Substrate 2030 Future Demand 2050 Supply Chain Capacity TPE Substrate 4© 2020 Avient Corporation, 33587 Walker Road, Avon Lake, Ohio USA 44012 CASE IN POINT: STOPPERS AND SEPTUMS Versaflex™ HC TPE from Avient offers customers an exceptional alternative to rubber for septums and stoppers. This was achieved, in part, through Avient’s customer service, which offers commercial, logistics and technical support to stopper and cap producers on a global basis.

• Factors that could cause actual results to differ materially from those implied by these forward-looking statements include, but are not limited to:  The time required to consummate the divestiture of our resin assets and the satisfaction or waiver of conditions in the sale agreement;  Any material adverse changes in the business supporting the resin assets being sold;  The ability to obtain required regulatory or other third-party approvals and consents and otherwise consummate the proposed divestiture  Our ability to achieve the strategic and other objectives relating to the acquisition of Spartech Corporation, including any expected synergies; our ability to successfully integrate Spartech and achieve the expected results of the acquisition, including, without limitation, the acquisition being accretive;  Disruptions, uncertainty or volatility in the credit markets that could adversely impact the availability of credit already arranged and the availability and cost of credit in the future;  The financial condition of our customers, including the ability of customers (especially those that may be highly leveraged and those with inadequate liquidity) to maintain their credit availability;  The speed and extent of an economic recovery, including the recovery of the housing market;  Our ability to achieve new business gains;  The amount and timing of repurchases, if any, of PolyOne common shares and our ability to pay regular quarterly cash dividends and the amounts and timing of any future dividends;  The effect on foreign operations of currency fluctuations, tariffs, and other political, economic and regulatory risks;  Changes in polymer consumption growth rates in the markets where we conduct business;  Changes in global industry capacity or in the rate at which anticipated changes in industry capacity come online;  Fluctuations in raw material prices, quality and supply and in energy prices and supply;  Production outages or material costs associated with scheduled or unscheduled maintenance programs;  Unanticipated developments that could occur with respect to contingencies such as litigation and environmental matters;  An inability to achieve or delays in achieving or achievement of less than the anticipated financial benefit from initiatives related to working capital reductions, cost reductions, employee productivity goals, and an inability to raise or sustain prices for products or services;  An inability to maintain appropriate relations with unions and employees; and  Other factors affecting our business beyond our control, including, without limitation, changes in the general economy, changes in interest rates and changes in the rate of inflation. • The above list of factors is not exhaustive. • We undertake no obligation to publicly update forward-looking statements, whether as a result of new information, future events or otherwise.

MARKETS & APPLICATIONS • Thermoformed, APET food packaging, including: - Hot steam sterilization - Hot fill - Microwave use • Polyester • Sheet extrusion & thermoforming KEY CHARACTERISTICS • Suitable for hot steam sterilization, hot fill, and microwave applications • Ideal for food-grade containers with high rigidity and improved gas barrier • Can withstand temperatures up to 100°C • Available in both transparent and opaque options • Processable on existing thermoforming lines with heated molds KEY BENEFITS • A fully circular monomaterial, up to 100% rPET polymer content • Promotion of the circularity of PET and the resulting packaging is possible • Helps customers to comply with the Packaging and Packaging Waste Regulation (PPWR) that demands recyclability of all packaging with binding PCR content targets by 2030 • Demonstrates improved productivity in comparison to CPET during thermoforming • Helps avoid possible EPR fees or penalties on difficult-to-recycle packaging PRODUCT BULLETIN Copyright © 2025, Avient Corporation.

Additionally, they can also create a Coupa Supplier Portal (CSP) account if they want to take advantage of the benefits of working with their customers through the CSP.

KEY BENEFITS • High-temperature stability and very good processability • Excellent compatibility with the application resin • Increase of intrinsic viscosity/molecular weight • Suitable for standard machinery used by customers • Good cost-performance ratio • Can be combined with color into a single combination concentrate for convenience • Product guidance and technical assistance from our experts PRODUCT BULLETIN Sustainability Spotlight Recycle Solutions Copyright © 2022, Avient Corporation.