VERSAFLEX™ PF Capa de adherencia Versaflex™ PF para películas de protección de superficies BOLETÍN TÉCNICO Propiedades Versaflex PF MD6727 Versaflex PF MD6741 Versaflex PF MD6649 Versaflex PF 9512 Versaflex PF MD6666 Versaflex PF MD6748 Versaflex PF MD6700 Características Baja adherencia Baja adherencia; se utiliza para ajustar el revestimiento con MD6700 Baja-media adherencia Oferta de valor Adherencia media Bajo contenido de gel/residuos Construcción de baja adherencia Alta adherencia Resistencia al desprendimiento Baja Baja-media Media Media-Alta Media-Alta Alta Alta Aplicaciones Películas ópticas Electrodomésticos Plásticos Construcción / Metales sin recubrimiento Metales acabados Acero/Metales pintados Metales sin recubrimiento MFR a 190 °C/2,16 kg -- 4,5 17 5,4 21 4,8 6,5 MFRa@ 230 °C/2,16 kg 10 20 -- -- -- -- -- Gravedad específica, g/cc 0,92 0,91 0,92 0,92 0,94 0,94 0,94 Dureza, Límite A 50 49 37 38 37 31 30 G' a 23 °C, Pa 28,0 x 105 10,4 x 106 8,3 x 105 -- 9,9 x 105 11,8 x 105 10,0 x 105 Tg DMA, °C -29 -30 -9 10 11 15 21 Película LDPE/Versaflex PF1 Desprendimiento de 180°, N/25 mm Acero inoxidable después de 20 minutos a 25 °C 0,5 2,2 3,2 6,1 6,7 8,5 8,6 después de 7 días a 25 °C 0,6 2,7 4,3 5,5 8,2 8,3 10,3 PMMA2 después de 20 minutos a 25 °C 1,1 1,7 3,8 4,9 6,9 8,3 8,8 después de 20 minutos a 75 °C 2,8 4,1 5,1 6,9 9,0 10,7 11,8 después de 7 días a 75 °C 4,0 4,4 5,9 9,8 8,4 9,8 10,3 Policarbonato3 después de 20 minutos a 25 °C 1,4 2,2 3,8 6,8 6,3 8,4 7,0 después de 20 minutos a 75 °C 3,4 4,8 6,7 8,8 8,8 10,0 11,8 después de 7 días a 75 °C 4,6 6,5 7,5 10,6 11,6 10,6 13,8 1 Grosor de la película: LDPE de 51 micras/Versaflex PF de 25 micras. 2 Arkema Plexiglas™ V052-100 (Plexiglas es una marca comercial de Arkema France Corp). 3 Sabic Lexan™ L52-111 (Lexan es una marca comercial de Sabic Innovative Plastics). Mobiliario y gabinetes. • Automoción y otros medios de transporte. 100/0 90/10 80/20 70/30 60/40 40/60 30/70 20/80 10/90 0/100 0,9 1,1 2,0 2,4 2,8 3,7 3,8 4,9 0 1 2 3 4 5 6 7 8 6,5 1,6 Versaflex PF MD6727 Versaflex PF MD6748 Versaflex PF MD6700 Versaflex PF MD6666 Versaflex PF 9512 Versaflex PF MD6649 Versaflex PF MD6741 0 2 4 6 8 10 12 % de MD6741/MD6700 El grado de adherencia puede personalizarse para superficies de sustrato.

For more information, see Create Custom Views section in this guide. 3 POs can have the following statuses: Status Description Buyer Hold The PO is approved but pending buyer review Cancelled The PO is cancelled and does not need to be fulfilled Closed The issued PO was received and then closed, either manually or automatically within Coupa Currency Hold The PO is on hold due to a currency exchange rate issue Issued The PO was approved and sent to you (the supplier) Soft Closed The PO is closed but can be reopened. At the top of the table whose view you want to change, click Create View in the View drop-down list. 7 3.

Handelsregisteramt des Kantons Basel-Landschaft BASEL LANDSCHAFT lpt Firmennummer cHE-112.279.714 Rechtsnatur Gesellschaft mit beschränkter Haft ung Eintragung 18.03.2005 Löschung Ubertrag CH-280.3.008.468-3 von: CH-280.3.008.468-3/a auf: 1 lllllililililIil ilril il Alle Eintragungen Ei Lö Firma Rel Sitz 1 1 2 2 2 2 elarian*ebsties feoatings-AG @ Avient Switzerland GmbH (Avient Switzerland LLC) 1 Muttenz Ref Stammkap.

Figure 3 shows the flexural test results with a convincing advantage in terms of stiffness correlation for the Digimat anisotropic modelling approach over the conventional isotropic modelling approach. Figure 1: Tensile test data as a function of the fibre orientation 0° (orange), 45° (green), 90° (blue) https://www.hexagonmi.com Figure 4: Failure location in the flexural test for the isotropic modelling Figure 6: Failure location in the tensile test for the isotropic modelling approach (left), Digimat anisotropic modelling approach (middle) and reality (right) Figure 3: Flexural test results with the isotropic modelling approach (orange) and Digimat anisotropic modelling approach (green) Figure 5: Tensile test results with the isotropic modelling approach (orange) and Digimat anisotropic modelling approach (green) Figure 5 shows the tensile test results with, again, a convincing advantage for the Digimat anisotropic modelling approach against the isotropic modelling approach.

Improved Thermal Stability & Reduced Yellowing Based on APR Critical Guidance Test Data 3mm Plaque Actual APR Tolerance L* 91 >82 da* -0.61 >-3 db* -0.38 1.5 Sample Delta L* Delta b* Reference -7.5 11.3 Reference + RHC -5.6 8.6 INCREASED rPET CONTENT & IMPROVED QUALITY SmartHeat RHC is APR accredited for both Critical Guidance and Bottle-to-Bottle, and is EPBP approved. IMPROVED BOTTLE QUALITY +2% in neck weight +3% in body weight -12% in base weight 8.5g 0.5L bottle, 60% rPET Polymer Weight Distribution Based on commercially produced water bottles, 51,000bph Mechanical Strength Increasing SmartHeat RHC Concentration Based on PTI 14.4g 0.5L water bottles, Instron testing To p Lo ad (l bs ) 14 15 16 17 8 9 10 11 0 20 40 60 80 100 0 50 100 150 200 250 300 350 400 450 Burst Pressure Increasing SmartHeat RHC Concentration Based on 8.5g, 0.5L commercially produced water bottles B ur st P re ss ur e (B ar ) 14 15 16 17 8 9 10 11 0 20 40 60 80 100 0 50 100 150 200 250 300 350 400 450 REDUCED CO2 EMISSIONS Increasing SmartHeat RHC Concentration Based on a commercial process producing 8.5g 0.5L water bottles as 51,000bph 25% reduction in energy consumed during the bottle blowing process En er gy k W Reduce Energy Consumption SmartHeat RHC increases the heat-up rate for preforms, enabling energy reductions for the heating lamps used during the bottle blowing process.

Page 3 of 5 https://abs.zertic.com https://abs.zertic.com Avient Corporation Manufacture of Masterbatches, Additives, ECCOH, and Compounds for Pigmenting Thermoplastic Pol. Ezcabarte calle H Nº3 , 31194 Oricain, Spain Avient Corporation Design and Manufacture of Colorants and Additives for Plastics 700/848 Moo 1,Tambol Phan Thong, Amata City Chonburi Industrial Estate Phan Thong Chonburi 20160, Thailand Avient Corporation Manufacture of Colour and Additive Concentrates, Thermoplastic Resins and Specialty Compounds Via Lainate 26, 20005 Pogliano Milanese, Italy Avient Corporation Manufacture of Masterbatches 329 Tungsten Rd, Strydompark , 2194 Randburg, South Africa Avient Corporation PolyOne Polymers India Private Limited Design & Manufacture of Color, Additive Concentrate & Specialty Compounds Survey No.344/1-2-3, Rania Works, Sakarda Bhadarwa Road Rania Gujarat 391780 India Avient Corporation Design and Manufacture of Color and Additive Concentrates, Thermoplastic Resins and Specialty Compounds 2nd Industrial City, Al-Kharj Road , 11432 Riyadh, Saudi Arabia Avient Corporation Design and Manufacture of Colour and Additive Concentrates, Thermoplastic Resins and Specialty Compounds Crta. Unit 3 Dodworth Business Park, Dodworth Barnsley South Yorkshire S75 3SP United Kingdom ISO 14001:2015ISO 14001:2015 Certificate Of ConformanceCertificate Of Conformance ANNEXANNEX Certificate No: 65537 Avient CorporationAvient Corporation At the below facilities FACILITY NAMEFACILITY NAME FACILITY ACTIVITYFACILITY ACTIVITY ADDRESSADDRESS Copyright as of the Effective Date, ABS Quality Evaluations, Inc.

All rights reserved. 65799Certificate No: Facility: Avient Austria GmbH Alfred Feierfeilstraße 3 Perchtoldsdorf 2380 Austria Facility: Avient Colorants Belgium SA Parc Scientifique Fleming, Fond Jean Pâques 1 Louvain-la-Neuve, Walloon Brabant 1348 Belgium Activity: Administration Activity: Site management, CSD – Customer Services, Manufacture, Laboratory, Supply Chain Management, Maintenance, Infrastructure, Warehouse and Transport Facility: Avient Colorants Brasil Ltda. José Garibaldi 2401 Lomas de Zamora, Buenos Aires 1832 Argentina Activity: Management of QMS, Design and manufacture of colour and additive concentrates, thermoplastic resins and specialty compounds Activity: Administration, Site management, Manufacture, Laboratory (QC and Colormatching), Procurement, Maintenance, Infrastructure, Warehouse and Transport, Sales Page 3 of 10 ABS Quality Evaluations Avient Corporation ISO 9001:2015 Certificate Of Conformance ANNEX At Below Facilities: Validity of this certificate may be confirmed at www.abs-qe.com/cert_validation. Facility: Avient Vietnam Company Limited 3 VSIP street 02 Vietnam Singapore Industrial Park Tuan Anh Town, Binh Duong 75000 Vietnam Activity: Administration, Site management, Manufacture, Laboratory, Procurement, Maintenance, Infrastructure, Warehouse and Transport Activity: Administration, Site management, Manufacture, Laboratory, Procurement, Maintenance, Infrastructure, Warehouse and Transport Facility: Avient Colorants USA LLC 9101 International Parkway Minneapolis, MN 55428 U.S.A.

FEATURED TPES FOR CONSUMER APPLICATIONS CO N SU M ER GENERAL PROPERTIES REGULATORY OVERMOLDING PROCESS FEATURES Appearance Hardness Specific Gravity Food Contact UL 94 Suitable Substrates Injection Extrusion ASTM Shore ASTM (D792) Consumer Electronics Series Versaflex™ CE 3120-40 Natural 42A 0.92 - - PC, ABS, PC/ABS, COPE ✔ - Good compression set—ideal for device cases or electronic grips Versaflex™ CE 3120-65 Natural 66A 1.15 - HB PC, ABS, PC/ABS, COPE ✔ - Chemical and abrasion resistant; 4.69 cradle-to-gate PCF—ideal for device cases or electronic grips Versaflex™ CE 3140-65N Natural 65A 1.00 - - PC, ABS, PC/ABS, COPE ✔ - 5G transparent materials—ideal for device cases or gaskets Versaflex™ CE 3140-90N Natural 90A 1.01 - - PC, ABS, PC/ABS, COPE ✔ - 5G transparent materials—ideal for device cases or gaskets Versaflex™ CE 3620 Black/ Natural 65A 1.00 - HB PC, ABS, PC/ABS, COPE ✔ - Chemical and abrasion resistant, hydrolitically stable—ideal for electronic grips/gaskets or wearables Engineering Resin Overmolds Versaflex™ OM 1060X-1 Natural 60A 0.93 ✔ - PC, ABS, PC/ABS ✔ - Versatile OM resin—ideal for grips/gaskets Versaflex™ OM 9-801N Natural 47A 1.04 ✔ HB PC, ABS, PC/ABS, PPO, POM, COPE, PMMA, HIPS ✔ - Soft touch/rubber feel—ideal for grips/gaskets Versaflex™ OM 9-802CL Clear 40A 0.92 ✔ - PC, ABS, PC/ABS, COPE ✔ - Soft touch/rubber feel—ideal for grips/gaskets Versaflex™ OM 6059-9 Black 58A 1.10 - HB PA 6 and 6,6 ✔ - Superior adhesion—ideal for grips, power tools/equipment Versaflex™ OM 6160-1 Black/ Natural 60A 1.11 ✔ HB PA 6 and 6,6 ✔ Superior adhesion—ideal for grips, power tools/equipment Versaflex™ OM 6240-1 Natural 43A 1.09 - - PA 6 and 6,6 ✔ - Superior adhesion — ideal for grips, power tools/equipment Versaflex™ OM 6258-1 Natural 62A 1.09 - - PA 6 and 6,6 ✔ - Superior adhesion—ideal for grips, power tools/equipment Versaflex™ OM 6258-9 Black 62A 1.09 - HB PA 6 and 6,6 ✔ - Superior adhesion—ideal for grips, power tools/equipment Versaflex™ OM 6275-9 Black 75A 1.10 - - PA 6 and 6,6 ✔ - Superior adhesion—ideal for grips, power tools/equipment Versollan™ OM1255NX Black 59A 1.05 - HB PC, ABS, PC/ABS, PC/PBT, COPE ✔ - Superior adhesion—ideal for power tool grips Versollan™ RU 2205-1 Natural 65A 1.16 - HB PC, ABS, PC/ABS, COPE ✔ ✔ High performance, rubber feel GENERAL PROPERTIES REGULATORY OVERMOLDING PROCESS FEATURES Appearance Hardness Specific Gravity Food Contact UL 94 Suitable Substrates Injection Extrusion ASTM Shore ASTM (D792) Special Series Versaflex™ VDT 4202-40B Black 40A 1.00 - - PP ✔ ✔ Vibration dispersion—ideal for washer/dryer feet or shin guards Versaflex™ G2800-17 Pink 18 OO 0.85 - - - ✔ - Skin-like feel—ideal for adult toys Versaflex™ SP 2820-55N Natural 55A 0.91 ✔ - - ✔ ✔ Superior puncture and tear resistance—ideal for dog toys Versaflex™ XP 2850 Natural 55A 0.88 ✔ - - ✔ ✔ Wet grip—ideal for water sports or grips Versaflex™ GP 2810-40N AM US Translucent 45A 0.87 ✔ - - ✔ - Antimicrobial Versaflex™ CE 3120-65 AM Natural 67A 1.15 - - PC, ABS, PC/ABS, COPE ✔ - Antimicrobial for consumer electronics Versalloy™ XL 9045-1 Natural 44A 0.88 ✔ - - ✔ - Excellent flow for long, thin flow paths— ideal for grips or thin wall parts Versalloy™ XL 9055-1 Natural 53A 0.89 ✔ - PP ✔ - Excellent flow for long, thin flow paths— ideal for grips or thin wall parts Versalloy™ XL 9055X-9 Black 53A 0.89 ✔ HB PP ✔ - Excellent flow for long, thin flow paths— ideal for grips or thin wall parts Versalloy™ XL 9070-1 Natural 70A 0.89 ✔ - PP ✔ - Excellent flow for long, thin flow paths— ideal for grips or thin wall parts Versalloy™ XL 9070X-9 Black 70A 0.89 ✔ HB PP ✔ - Excellent flow for long, thin flow paths; 2.54 cradle-to-gate PCF—ideal for grips or thin wall parts Dynaflex™ G7702-9001-02 Black 37A 1.10 - - PP ✔ ✔ High temperature performance—ideal for seals and gaskets Dynalloy™ DT 7910W White 45A 0.93 ✔ - - ✔ ✔ Low compression—ideal for dairy tubing Versaflex™ CL 2000X Clear 3A 0.87 ✔ - - ✔ ✔ Ultra soft Versaflex™ CL 2003X Clear 33 OO 0.87 ✔ - - ✔ ✔ Gel feel Versaflex™ CL30 Clear 30A 0.89 ✔ - PP ✔ ✔ High clarity, high tackiness Versaflex™ CL40 Clear 43A 0.89 ✔ HB - ✔ ✔ High clarity, high tackiness General Purpose Series Versaflex™ GP 2810 Translucent 20A–60A 0.88 ✔ - - ✔ ✔ Unfilled Versaflex™ GP 2810 Translucent 70A–90A 0.89 ✔ HB - ✔ ✔ Unfilled Dynaflex™ G7920 Natural/Black 20A 1.01 ✔ - PP ✔ ✔ Filled Dynaflex™ G7900 Natural/Black 30A–90A 1.05–1.20 ✔ HB PP ✔ ✔ Filled FEATURED TPES FOR CONSUMER APPLICATIONS CO N SU M ER GENERAL PROPERTIES REGULATORY OVERMOLDING PROCESS FEATURES Appearance Hardness Specific Gravity Compression Set @ 23°C Compression Set @ 100°C Food Contact ISO 10993 USP VI UL 94 Suitable Substrates Injection Extrusion ASTM Shore A ASTM (D792) ASTM % ASTM % Tubing Versaflex™ G2705 N Translucent 60 0.89 20 - ✔ ✔ ✔ ✔ PP ✔ ✔ High resiliance, low compression set, and good puncture sealing–ideal for medical and biopharma tubing Versaflex™ HC BT218 Translucent 67 0.89 19 69 - ✔ ✔ ✔ - - ✔ Weldable and kink resistant—ideal for biopharma tubing Versalfex™ HC BIO BT218 Translucent 70 0.88 18 58 - ✔ ✔ - - - ✔ Weldable and kink resistant; 40% bio-derived content (Gen 1 biomass)—ideal for biopharma tubing Versaflex™ HC MT317 Translucent 68 0.89 17 69 - ✔ ✔ ✔ - - ✔ Flexible and kink resistant, high service temperature —ideal for medical and biopharma tubing Versalloy™ HC 9220-70 Natural 70 0.95 17 51 - ✔ ✔ - PP ✔ ✔ High temperature resistance—ideal for peristaltic pump tubing Syringe Components Versaflex™ HC 2110-35N Natural 35 0.89 19 47 - ✔ ✔ - LDPE, PP ✔ - Good puncture sealing and elevated temperature performance—ideal for septums Versaflex™ HC 2110-57B Black 57 1.01 20 37 - ✔ ✔ - - ✔ - Low coefficient of friction and elevated temperature performance—ideal for plungers and stoppers Engineering Resin Overmolds Versaflex™ OM 1040X-1 Translucent 42 0.92 22 - ✔ ✔ ✔ - PC, ABS, PC/ABS ✔ - Good compression set at room temperature— ideal for seals and grips Versaflex™ OM 3060-1 Clear 59 0.90 33 - ✔ ✔ ✔ HB PC, ABS, PC/ABS, PC/PETG, PC/PBT ✔ - Good compression set at room temperature and UV stability—ideal for seals and grips Versaflex™ OM 8940X-1 Clear 40 0.92 20 - ✔ ✔ - - PK, COPE, PC, ABS, PC/ABS ✔ - Excellent chemical resistance to alcohols and disenfectants—ideal for grips on medical devices Versaflex™ OM 4052 Translucent 56 1.01 27 - ✔ - - - PC, ABS, PC/ABS ✔ - Excellent chemical resistance to skin oils, like sebum, and hand lotion—ideal for consumer healthcare applications Versaflex™ OM 4063 Translucent 64 1.12 30 - ✔ - - PC, ABS, PC/ABS ✔ - Excellent chemical resistance to skin oils, like sebum, and hand lotion—ideal for consumer healthcare applications General Purpose Applications Versaflex™ CL E85 Clear 85 0.90 20 72 ✔ ✔ ✔ - - - ✔ High clarity without plasticizers—ideal for extrusion Versaflex™ HC 3810 Series Translucent 20–90 0.88 16 54 - ✔ - - - ✔ - Formulated without animal derivatives, excellent colorability—ideal for seals and labware Versaflex™ G2705 N Translucent 60 0.89 20 - ✔ ✔ ✔ - PP ✔ ✔ High resiliance, low compression set, and good puncture sealing Versalloy™ HC 9220-70 Natural 70 0.95 17 51 - ✔ - - PP ✔ ✔ High temperature resistance Versalloy™ HC 9210 Series Natural 55 & 70 0.89 20 44 - - ✔ - - ✔ - Formulated without animal derivatives— ideal for injection molding long thin flow paths, smooth surface aesthetics Versaflex™ CL2242 Clear 43 0.89 23 - ✔ ✔ ✔ - - ✔ - High clarity maintained after boiling cleaning processes Versaflex™ CL2250 Clear 50 0.89 20 - ✔ ✔ ✔ - - ✔ - High clarity maintained after boiling cleaning processes FEATURED TPES FOR HEALTHCARE APPLICATIONS H EALTH CAR E GENERAL PROPERTIES REGULATORY BONDING PROCESS FEATURES Appearance Hardness Specific Gravity Weatherability* VOC FOG Odor** UL 94 Suitable Substrates Injection Extrusion ASTM Shore A ASTM (D792) Internal QUV 1000hrs (Delta E) VDA 278 μg/g (ppm) VDA 278 μg/g (ppm) Recycled Content Series reSound™ REC OF 7310-80 Black/ Natural (Gray) 80 0.90 0.35 75 379 3 (VDA 270) - PP ✔ 35% PCR/PIR content (food packaging)— ideal for automotive interior applications reSound™ REC OF 7310-90 Black/ Natural (Gray) 90 0.91 0.11 160 557 3 (VDA 270) - PP ✔ 45% PCR/PIR content (food packaging)— ideal for automotive interior applications General Purpose Series OnFlex™ G7705 B Black 42 1.20 - - - - - PP ✔ ✔ Easy processing for a wide variety of applications OnFlex™ G7705 N Natural 44 1.18 - - - - - PP ✔ ✔ Easy processing for a wide variety of applications OnFlex™ G7720 B Black 57 1.16 0.55 - - - HB PP ✔ ✔ Easy processing for a wide variety of applications OnFlex™ G7720 N Natural 55 1.17 3.72 - - - HB PP ✔ ✔ Easy processing for a wide variety of applications OnFlex™ G7820 N Natural 92 1.14 - - - - - PP ✔ ✔ Easy processing for a wide variety of applications Automotive Fasteners & Interior Components OnFlex™ AF 7210 Series Natural 40–90 1.00 - - - - - PP ✔ - Low odor and good UV resistance OnFlex™ AF 7210 Black 40 1.00 0.49 113 845 2 (SAE J1351, Dry) - PP ✔ - Low odor and good UV resistance OnFlex™ AF 7210 Black 50 1.00 0.42 51 762 2 (SAE J1351, Dry) - PP ✔ - Low odor and good UV resistance OnFlex™ AF 7210 Black 60 1.00 0.21 112 1740 1 (SAE J1351, Dry) - PP ✔ - Low odor and good UV resistance OnFlex™ AF 7210 Black 70 0.99 0.22 105 1976 3 (SAE J1351, Dry) - PP ✔ - Low odor and good UV resistance OnFlex™ AF 7210 Black 80 1.00 0.32 74 4459 3 (SAE J1351, Dry) - PP ✔ - Low odor and good UV resistance OnFlex™ AF 7210 Black 90 1.00 - - - - - PP ✔ - Low odor and good UV resistance HVAC & Interior Components OnFlex™ LO 7120-45N Natural 45 1.15 3.21 41 521 2 (SAE J1351, Dry) - PP ✔ - Significant reductions in VOCs and fogging compared to traditional TPE technologies GLS™ TPEs with Antimicrobial Technologies OnFlex™ LO 7120-45B AM Black 45 1.13 0.52 - - - - PP ✔ - Imbedded antimicrobial technology FEATURED TPES FOR TRANSPORTATION APPLICATIONS TRAN SPO RTATIO N * Values were taken on 3mm plaques following 1000hrs of continious exposure to UVA-340 ** Samples were conditioned at 23C at 35% RH for 24 hrs.

Forward Looking Statements POLYONE CORPORATION 3  This presentation includes the use of both GAAP (generally accepted accounting principles) and non-GAAP financial measures. Use of Non-GAAP Measures 4POLYONE CORPORATION FORMULATION EXPERTISE SERVICE INNOVATION Expertise in Polymer Materials, Services and Solutions OEMs Brand Owners Processers Assemblers IQ Design Labs InVisiOSM Color Services LSS Customer First Specialty products & services driving customer value What We Do 5POLYONE CORPORATION PolyOne At a Glance 2017 Revenue – $3.2 billion Performance Products & Solutions 21% PolyOne Distribution 34% Specialty Engineered Materials 19% Color Additives & Inks 26% United States 59% Europe 14% Latin America 9% Canada 8% Asia 10% $0.13 $0.68 $0.82 $1.00 $1.31 $1.80 $1.96 $2.06 $2.21 2009 2010 2011 2012 2013 2014 2015 2016* 2017 Transportation 18% Consumer 12% Healthcare 11% Packaging 11% Industrial16% Building & Construction 12% Wire & Cable 9% Electrical & Electronics 6% Appliance 5% *Recast for DSS in discontinued operations 6POLYONE CORPORATION 2% 43% 76% 0% 20% 40% 60% 80% 100% 2005 2010 2017 % o f O pe ra tin g In co m e* *Operating Income excludes corporate charges and special items Specialty OI $5M $87M $280M JV’s Performance Products & Solutions Specialty MixDistribution Mix Shift Highlights Specialty Transformation Distribution and Contract Manufacturing Businesses 7POLYONE CORPORATION Consistently Deliver Double Digit Annual EPS Growth *ROIC is defined as TTM adjusted OI after tax divided by the sum of average debt and equity less cash over a 5 quarter period Proof of Performance 2020 Platinum Vision 20%+ 20%+ 12 - 14% 6.5 – 7.5% 15% 2006 2017 2020 “Where we were” “Where we are” Platinum Vision ROIC* 5.0% 14.0% Operating Income % of Sales Color, Additives & Inks 1.7% 15.5% Specialty Engineered Materials 1.1% 12.5% Performance Products & Solutions 5.5% 10.7% Distribution 2.6% 6.3% 8POLYONE CORPORATION $50 $116 $0 $40 $80 $120 $160 $200 2012 2014 2016 2018 10.8% 11.3% 10.0% 11.0% 12.0% 13.0% 14.0% 15.0% 2012 2014 2016 2017 2020 Platinum Vision *ROIC is defined as TTM adjusted OI after tax divided by the sum of average debt and equity less cash over a 5 quarter period Free Cash Flow and Improving Returns Free Cash Flow (in millions) ROIC* $200 - $220 14.0% $143 12.9% 15.0% 9POLYONE CORPORATION $767M Returning Cash to Shareholders $0 $150 $300 $450 $600 $750 2011 2012 2013 2014 2015 2016 2017  Since 2011, we have returned over $950 million to shareholders $767M Cumulative Share Repurchases (in millions) $0.16 $0.20 $0.24 $0.32 $0.40 $0.48 $0.58 $0.70 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 3-Year Dividend Plan Increasing Annual Dividend 10POLYONE CORPORATION  Expanding our sales, marketing, and technical capabilities  Investing in operational and LSS initiatives  ~60 - 70% of capital expenditures fund growth initiatives Organic Growth Acquisitions Share Repurchases Dividends  Targets that expand our: • Specialty offerings • End market presence • Geographic breadth  Growth synergies  Adjacent material solutions  Repurchased 2.0 million shares in 2017  Repurchased 20.8 million shares since early 2013  6.5 million shares are available for repurchase under the current authorization  Increased annual dividend by 30% to $0.70 per share, representing the eighth consecutive year of dividend growth  Expect to increase annual dividend 60% or more cumulatively over next three years Free Cash Flow and Strong Balance Sheet Fund Investment / Shareholder Return 11POLYONE CORPORATION *Specialty Platform revenue from products introduced in last five years Vitality Index Progression* 12% 38% 2006 2017 Target ≥ 35% Innovation Drives Earnings Growth $20 $52 2006 2017 Research & Development Spend ($ millions) Total Specialty Addressable Market of over $2.6 Billion (10 Projects) (10 Projects) ($500 million) (19 Projects) ($1.4 billion) Innovation Pipeline Potential Frame Opportunity Prototype Scale-up and Test Market Commercial Launch $500 Million $1.4 Billion $700 Million Phase 5Phase 4Phase 3Phase 2Phase 1 Build Business Case 12POLYONE CORPORATION 2017 2021 Key Innovation Growth Platforms Composites Barrier Additive Technology Fiber Colorants Flame Retardant Polymers  Increasing regulatory drive for halogen replacements  $400m addressable market  Drive to prevent oxygen, light and UV rays from affecting contents in PET packaging, extending shelf life  $200m addressable market  60% of world fiber consumption is synthetic, need to simplify manufacturing and eliminate waste  $300m addressable market  Polymer formulation and process engineering create a pipeline for next generation materials  Drive to replace aluminum and steel with plastics without compromising on strength Total Sales ($millions) 2017 2021 2017 2021 2017 2021 13POLYONE CORPORATION  Providing LSS services to small/medium sized customers – have trained over 30 customers in LSS methodology  Providing Industrial design and color services to small/medium sized customers  On time delivery above 95% Strengthening Relationships: Customer First Through World-Class Service 14POLYONE CORPORATION  Addressable market exceeds $40 billion  Strong performance demonstrates that our strategy and execution are working  Megatrends and emerging opportunities align with strengths  Innovation and services provide differentiation, incremental pricing power and competitive advantage  Strategic reinvestment for growth while returning cash to shareholders  Strong and proven management team driving growth and performance Why Invest In PolyOne? PolyOne �Investor Presentation Slide Number 2 Slide Number 3 Slide Number 4 Slide Number 5 Slide Number 6 Slide Number 7 Slide Number 8 Slide Number 9 Slide Number 10 Slide Number 11 Slide Number 12 Slide Number 13 Slide Number 14 Slide Number 15 Slide Number 16 Slide Number 17 Slide Number 18 Slide Number 19 Slide Number 20 Slide Number 21 Slide Number 22 Slide Number 23 Slide Number 24 Slide Number 25 Slide Number 26 Slide Number 27 Slide Number 28 Slide Number 29 Slide Number 30 Slide Number 31 Slide Number 32 Investor Presentation - March 2018 r4.pdf Investor Presentation - March 2018

Use of Non GAAP Measures Page 3 -150.00% -50.00% 50.00% 150.00% 250.00% 350.00% PolyOne S&P 500 Strategy and Execution Drive Results Page 4 All time closing high of $29.48 August 1, 2013 • 15 consecutive quarters of double digit EPS growth • 42% CAGR adjusted EPS expansion 2006-2012 • YTD stock price has increased 42% versus 20% growth in the S&P • 275% increase in market cap: $0.7b $2.6b since 2006 The World’s Premier Provider of Specialized Polymer Materials, Services & Solutions Four Pillar Strategy Page 5 PP&S 15% Specialty 60% Distribution 25% 0.12 0.27 0.21 0.13 0.68 0.82 1.00 2.50 $0.00 $0.25 $0.50 $0.75 $1.00 $1.25 $1.50 $1.75 $2.00 $2.25 $2.50 2006 2007 2008 2009 2010* 2011* 2012* 2015 Target A dj us te d Ea rn in gs P er S ha re Appliance 6% Building & Construction 13% Wire & Cable 9% Electrical & Electronics 4% Consumer 9% Packaging 18% Industrial 10% Misc. 5% HealthCare 9% Transportation 16% Textiles 1% United States 70% Europe 14% Canada 8% Asia 5% Latin America 3% 2012 Revenues: $4.0 Billion* End Markets* 2012 Revenues: $4.0 Billion* EPS Page 6 * Pro Forma includes FY2012 results for Spartech (11/03/12 YE) and Glasforms & excludes discontinued operations PolyOne At A Glance * Restated to exclude discontinued operations Old PolyOne Transformation *Operating Income excludes corporate charges and special items **Pro Forma results include Spartech and Glasforms acquisitions, Specialty Coatings reclass and excludes discontinued operations 2% 34% 43% 45% 60% 65- 75% 0% 20% 40% 60% 80% 100% 2005 2008 2010 2012 2012 PF** 2015 % o f O pe ra ti ng In co m e* JV's PP&S Distribution Specialty Specialty OI $5M $46M $87M $114M $150M Target Mix Shift Highlights Specialty Transformation 2015 Target Page 7 2006 H1 2013 2015 Where we were Where we are Organic Consolidated Target 1) Operating Income % Specialty: Global Color, Additives & Inks 1.7% 12.7% 12.6% 12 – 16% Global Specialty Engineered Materials 1.1% 10.9% 9.2% 12 – 16% Designed Structures & Solutions — — 4.4% 8 – 10% Performance Products & Solutions 5.4% 8.1% 8.2% 9 – 12% Distribution 2.6% 6.1% 6.1% 6 – 7.5% 2) Specialty Platform % of Operating Income 6.0% 62% 65 – 75% 3) ROIC* (after-tax) 5.0% 9.4% 15% 4) Adjusted EPS Growth N/A 26% Double Digit Expansion Proof of Performance & 2015 Goals *ROIC is defined as TTM adjusted OI divided by the sum of average debt and equity over a 5 quarter period Page 8 *Percentage of Specialty Platform revenue from products introduced in last five years 19.5% 46.5% 2006 Q2 2013 $20.3 $44.7 2006 TTM Q2'13 14.3% 31.1% 2006 Q2 2013 Research & Development Spending Specialty Platform Vitality Index Progression* Innovation Drives Earnings Growth ($ millions) Specialty Platform Gross Margin % Page 9 We are Experts in Polymer Science and Formulation  Polymer Science  Formulation  Chemistry  Processing Inputs  Base Resins  Additives  Modifiers  Colorants Specialized Polymer Materials, Services, and Solutions Expertise Satisfied Consumers PolyOne Customer Innovative Products & Services  Marketplace Demands  Performance Requirements  Value Drivers Page 10 Positioned for Strong Growth 2015 Target Rev: $5B Adj. EPS: $2.50 Assumptions • Operating margins in mid-range of 2015 targets • No global recession • No investment in incremental PP&S capacity • Completion of 2-3 midsize accretive acquisitions • Housing starts at 85% of 50 year norm by 2015 • Mid single digit revenue CAGR • Remain comfortably below 3X Net Debt / EBITDA Page 11 2012 Rev: $2.9B Adj.