RT3780 BLACK 2 - DNU UV WHITE 3 GELOY PRIMARY YELLOW UV

UV YELLOW 803C DK BLUE + UV TR 433501A-MS3 Storm Gray Conc Gen 2

RED 2 LT GREY UV ACCENT UV ARCTIC WHITE II

M3229 BLUE #2 D2846C Royal Blue -UV D2846C Navy Blue-UV

PE 161 GRN 1874-2 GMF 604 40 UV BLACK 115 1 BLACK UV

AMBER UV V3 AMBER UV V4 DX9/WPP351 MP-552 LDR 2 %

UV BLUE SATELLITE PE 2 UV ELECTRIC GREEN PE 802C BLACK

These concentrates contain a very high pigment load, allowing low addition rates (one percent or lower) and reduce color variation from one resin type to another. PRODUCT SPECIFICATION PRODUCT BULLETIN CARRIER PVC Recommended % of use 1% Temperature resistance 200°C Dispersion - abaque Avient ≤ 2 Copyright © 2022, Avient Corporation.

Standard grades in the portfolio conform to UL 94 V-2, V-0 and 5VA performance ratings, and many offer elevated Relative Thermal Index (RTI) ratings. Drying non-halogenated materials is suggested. 2 hours @ 100 (38) Moisture Range (%) Not required Follow up by purging machine with general purpose PP • Residence time should not exceed 5 minutes for Maxxam FR products • General ventilation is suggested Shut Down • Purge the equipment with a general purpose PP • All tooling and equipment must be free of any residual Maxxam FR upon shut down • Continue generating parts made from the natural PP until clear • Wipe down tool steel with mold cleaner • When using a hot runner system, care must be taken to remove residual product from the manifold MOLD DESIGN RECOMMENDATIONS Cold Slug Wells • Place cold slug wells at the base of the sprue to capture the cold material first emerging from the nozzle • Place cold slug wells at every 90° bend in the runner system • Well depths approximately 2–3 times the diameter of the runner provide best results Draft Angle • Draft angle should be 1/2°–1° per side.

2. One of the most common scales is the Shore A scale, using a blunt indenter and a moderate spring force. Going quickly from a state of high stress to one of low stress can increase the amount of shrinkage.