Renol™ Fiber Colorants Renol™ Concentrates for Non-Olefins Renol™ Concentrates for Non-Olefins

Renol™ Fiber Colorants Renol™ Concentrates for Non-Olefins Renol™ Concentrates for Non-Olefins

Renol™ Fiber Colorants Renol™ Concentrates for Non-Olefins Renol™ Concentrates for Non-Olefins

Renol™ Fiber Colorants Renol™ Concentrates for Non-Olefins Renol™ Concentrates for Non-Olefins

Renol™ Fiber Colorants Renol™ Concentrates for Non-Olefins Renol™ Concentrates for Non-Olefins

Renol™ Fiber Colorants Renol™ Concentrates for Non-Olefins Renol™ Concentrates for Non-Olefins

RAL 3015 - Afnor A-870 BS/IEC 304 (Dark Grey) RAL 6024 - Afnor A-460 Afnor A-571 (Light Blue) RAL 4005 - Afnor A-730 RAL 7035 - BS/IEC 304 (Light Grey) RAL 2004 - BS/IEC 304 RAL 8002 - BS/IEC 304 RAL 6016 - Afnor A-445 RAL 6027 - BS/IEC 304 RAL 7032 RAL 1021 - BS/IEC 304 Afnor A-330 RAL 5015 - BS/IEC 304 RAL 7000 - Afnor A-625 RAL 2003 RAL 6018 - BS/IEC 304 RAL 9005 - BS/IEC 304 Afnor A-603 RAL 9010 - BS/IEC 304 Afnor A-665 RAL 8003 RAL 3000 - BS/IEC 304 Afnor A-805 The following colors are available in all ranges with short-term delivery.

It enables: • Increased rPET content • Reduced CO2 emissions When added to PET preforms and bottles, ColorMatrix AAzure helps to: • Improve bottle quality - Reduced preform acetaldehyde by up to 80% - Improved mechanical strength - Lightweighting • Improve processability - Reduced bottle blowouts - Reduced scrap - Improved productivity • Reduce energy consumption during bottle blowing process ColorMatrix AAzure has a slight blue tint, which is useful for off-setting yellowing often associated with the use of rPET, and has minimal impact on final product color or aesthetics.

Figure 1: Tensile test data as a function of the fibre orientation 0° (orange), 45° (green), 90° (blue) https://www.hexagonmi.com Figure 4: Failure location in the flexural test for the isotropic modelling Figure 6: Failure location in the tensile test for the isotropic modelling approach (left), Digimat anisotropic modelling approach (middle) and reality (right) Figure 3: Flexural test results with the isotropic modelling approach (orange) and Digimat anisotropic modelling approach (green) Figure 5: Tensile test results with the isotropic modelling approach (orange) and Digimat anisotropic modelling approach (green) Figure 5 shows the tensile test results with, again, a convincing advantage for the Digimat anisotropic modelling approach against the isotropic modelling approach.

STANDARD BARSTOCK PRODUCTS PRODUCT MATERIAL DESCRIPTION COLOR MAX THICKNESS IN (MM) MAX WIDTH IN (CM) FLEXURAL MODULUS Msi (GPa) FLEXURAL STRENGTH ksi (MPa) GLASS % GC-67-UB Glass/Epoxy Black 0.575 (14.6) 11.75 (29.8) 5.8 (39.99) 153 (1055) 67 GC-67-UBZ Glass/Epoxy Black 0.5 (12.7) 8.75 (22.2) 5.8 (39.99) 153 (1055) 67 GC-60-UBC Carbon/Epoxy Black 0.25 (6.35) 4.0 (10.2) 12.5 (86.19) 150 (1034) 60 GC-67-UBW Glass/Epoxy, 90° Weft Blue 0.25 (6.35) 8.75 (22.2) 4.8 (33.10) 150 (1034) 67 http://www.polyone.com/content/product-selection-help-form PULTRUDED PROFILES - TYPICAL PROPERTIES The Glasforms™ pultrusion process creates continuous, constant cross-sectional profiles with consistent, uniform quality and exceptional mechanical performance.